Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UC3843AD8TRG4 by Texas Instruments is a switching controller with current-mode control technique. It operates at 0-70°C, supporting input voltage of 8.2-15V and output voltage of 4.9-5.1V. Ideal for applications requiring a max output current of 1A and a switching frequency up to 500kHz in commercial-grade environments.
Median Price
$1.550
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.728
1k+ parts
$0.505
10k+ parts
$0.422
Adafruit Industries
-
Chip Stock
Digiode
Vyrian
Nova Conductors
Ampacity Inc.
$1.500
Component Stockers USA
$6.870
Parana Technologies
$9.899
$10.467
IDEA Electronic Components Group
$11.122
$10.566
$10.010
ChromeModa Solutions
$9.120
AZTECH Wire
$19.687
Corohmni
$24.915
Continental Prestige Electronics
Corphita
S.R.D Solutions
Argo Parts USA
Microchip USA
DigiPath Technology Company
$10.028
Bastille Electronics
Perfect Parts
Advanced Electronics
The use of plastic/epoxy material makes this product lightweight and durable.
Being surface mountable allows for easy and efficient installation in various applications.
The rectangular package shape helps in optimizing space on the circuit board.
With a nominal supply voltage of 11V, this regulator is suitable for a wide range of applications.
The 8 terminals provide flexibility for connecting external components in the circuit.
The small outline package style helps in saving space on the PCB.
The high maximum operating temperature ensures reliable performance even in harsh environments.
The minimum output voltage of 4.9V enables precise control over the output.
The current-mode control mode offers improved transient response and stability.
The low minimum operating temperature ensures the regulator can function in a wide range of environments.
The terminal finish of Ni/Pd/Au provides excellent conductivity and corrosion resistance.
The maximum output voltage of 5.1V allows for a stable output for various applications.
The dual terminal position makes it easier to connect external components.
The low seated height allows for a compact design of the PCB.
The narrow width of 3.9mm helps in accommodating the regulator in tight spaces.
The switching controller type ensures efficient power conversion.
The nominal input voltage of 15V makes it suitable for a wide range of power sources.
The minimum supply voltage of 8.4V ensures the regulator can still operate even under low input conditions.
The peak reflow temperature of 260°C allows for reliable soldering during assembly.
The length of 4.9mm helps in optimizing the layout of the circuit board.
The commercial temperature grade ensures the regulator meets industry standards for various applications.
The high switching frequency of 500kHz allows for a fast response time and efficient power conversion.
The maximum supply current of 25mA ensures stable power delivery to the load.
The maximum output current of 1A provides sufficient power for various loads.
The bipolar technology used in this regulator offers high switching efficiency and low noise operation.
The gull wing terminal form makes it easy to solder the regulator onto the PCB.
The pulse width modulation control technique offers precise control over the output voltage.
The buck-boost switcher configuration allows for both step-up and step-down voltage regulation.
The terminal pitch of 1.27mm provides flexibility in connecting external components.
The high maximum supply voltage of 28V makes this regulator versatile for various power sources.
The minimum input voltage of 8.2V ensures the regulator can handle low input conditions.
The nominal output voltage of 5V provides a stable power source for connected devices.
The maximum input voltage of 25V allows for compatibility with a wide range of power sources.
Switching Regulators & Controllers UC3843AD8TRG4 attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
UC3843AD8TRG4 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - UCYYY 13/DEC/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Silicon Standard
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Vishay Telefunken
Semtech
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TPS560430XDBVR
Texas Instruments
TPS560430XDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 24V. It operates in buck configuration, supports pulse frequency modulation control technique, and has a small outline package style suitable for automotive applications.
LM2574M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS63020DSJR
TPS63020DSJR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 85°C. It offers a wide input voltage range of 1.8-5.5V and output voltage from 1.2-5.5V, supporting up to 4.5A output current for industrial applications requiring efficient power management in compact spaces at high frequencies up to 2600kHz.
LM2675MX-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2596S-ADJ/NOPB
LM2596S-ADJ/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating from -40 to 125°C. It offers an output voltage range of 3.3V to 37V and a max current of 3A, suitable for automotive applications due to its compact size (10.16mm x 8.64mm) and high efficiency (up to 173kHz).
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
TPS40170RGYR
TPS40170RGYR by Texas Instruments is a voltage-mode switching regulator with a max output current of 20A and a max output voltage of 57V. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics or industrial automation systems.
LM2596S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ34202RVQR
LMZ34202RVQR by Texas Instruments is a 43-terminal switching regulator with a max output current of 2A and a max switching frequency of 1kHz. It operates in industrial temperatures, has a min input voltage of 4.5V, and is ideal for buck-boost applications requiring precise pulse width modulation control.
TPS62125DSGT
TPS62125DSGT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.3A, suitable for industrial applications. It operates in voltage-mode control technique with a max switching frequency of 1000kHz and offers a compact package style with small outline and very thin profile.
LM2576HVS-ADJ/NOPB
CSD87381P
CSD87381P by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -55 to 150°C, and max output current of 40A. It is designed for military-grade applications requiring pulse width modulation control at a max switching frequency of 1500 kHz. The package style is a special shape made of plastic/epoxy material, suitable for compact designs with nominal input voltage up to 12V and peak reflow temperature of 260°C.
UC2825DWTRG4
UC2825DWTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for applications demanding efficient power conversion with minimal footprint.
LTM4644IY-1#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS55288RPMR
TPS55288RPMR by Texas Instruments is a switching regulator with 26 terminals, operating temperature range of -40 to 150°C, and max output current of 6.35A. It is ideal for automotive applications due to its pulse frequency modulation control technique and buck-boost switcher configuration.
TPS60400DBVT
TPS60400DBVT by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 350kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring a nominal input voltage of 5V and a min output voltage of -5V.
UCC28950TPWRQ1
UCC28950TPWRQ1 by Texas Instruments is a switching controller with a current-mode control technique, operating at a max frequency of 1000 kHz. It has a nominal output voltage of 5 V and can handle a max output current of 0.1 A. This industrial-grade device is suitable for applications requiring precise voltage regulation in automotive electronics and other industrial systems.
IR1155STRPBF
Infineon Technologies
IR1155STRPBF by Infineon is a current-mode power factor controller with boost switcher config. Operating at 200 kHz, it has a nominal voltage of 15 V and max input voltage of 19 V. This small outline IC is ideal for switching regulators & controllers in applications requiring efficient power supplies.
LMZ14203HTZ
LMZ14203HTZ by Texas Instruments is a voltage-mode switching regulator with 3A output current, ideal for automotive applications. It operates b/w -40°C to 125°C, accepting input voltages from 6V to 72V and providing a stable 12V output. This small outline package with gull wing terminals is surface mountable and designed for efficient power management in compact spaces.
EN5322QI-T
Intel
EN5322QI-T by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It has a max output current of 2A and operates at a frequency of up to 4MHz. Ideal for industrial applications requiring efficient power management in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UC3843BVD1R2G
Onsemi
UC3843BVD1R2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 105°C, with input voltage range from 12-25V.
UC3843BN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
UC3843BN by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for applications requiring pulse width modulation control, it operates b/w 0-70°C temp range in commercial grade setups.
Motorola
UC3843BD1G
UC3843BD1G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w 0-70°C, suitable for commercial applications like power supplies due to its pulse width modulation control technique.
UC3845AD8TR
UC3845AD8TR by Texas Instruments is a current-mode switching controller with a 1A output current and 500kHz max switching frequency. It operates b/w 0-70°C, suitable for commercial applications requiring a 5V output voltage. The IC features pulse width modulation control technique in a small outline package ideal for space-constrained designs.
Unitrode
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UC3845BN
UC3845BN by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 275kHz. It operates b/w 0-70°C, suitable for commercial applications like power supplies and voltage regulators. Package style is in-line with 8 terminals and dimensions of 9.78mm x 7.62mm x 4.45mm (LxWxH).
UC3843BD1R2G
UC3843BD1
UC3843BD1 by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w 0-70°C, suitable for small outline applications in commercial grade environments.
UC3843BNG
UC3845BNG
UC3845BNG by Onsemi is a current-mode switching controller with a max output current of 1A and a max switching frequency of 275kHz. It operates in the temperature range of 0-70°C, making it suitable for various commercial applications requiring pulse width modulation control technique.
UC3843BD1013TR
UC3843BD1013TR by STMicroelectronics is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w 0-70°C, suitable for commercial applications like power supplies and voltage regulators. Package style is small outline, surface mountable with dual terminals.
UC3842BN
UC3842BN by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w 0-70°C, ideal for commercial applications requiring pulse width modulation control technique in a single switcher configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved