Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TIL804-10 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It has a peak wavelength of 655nm, display height of 7mm, and max forward voltage of 2.1V. Ideal for applications requiring red color output in temperature range -20 to 75°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Semicontronic
$0.100
$0.098
$0.097
Parana Technologies
$0.109
$1.464
DigiPath Technology Company
$0.121
$0.111
ChromeModa Solutions
$0.123
$0.101
IDEA Electronic Components Group
Ampacity Inc.
$13.100
One Stop Electronics
$17.100
AZTECH Wire
$19.101
Corphita
Corohmni
Common cathode configuration allows for easier circuit design and reduces complexity in connecting multiple LEDs.
Peak wavelength of 655 nm provides a vibrant red color display, which is visually appealing and eye-catching.
The 7 segment numeric display allows for clear and easy-to-read numerical information, making it suitable for applications requiring numerical data display.
With a maximum operating temperature of 75°C, this LED display can withstand high temperature environments, ensuring reliable performance.
The ability to operate at temperatures as low as -20°C makes this LED display suitable for a wide range of operating environments.
Having 10 characters allows for displaying a larger amount of information, making it versatile for various applications that require more characters to be displayed.
The red color display is commonly used for indicators and alarms, making this LED display suitable for applications where red color is preferred or required for signaling.
The 7 mm display height offers clear visibility of the displayed information, making it suitable for applications where readability is crucial.
The maximum forward voltage of 2.1 V ensures efficient power utilization and prevents the LED from getting damaged due to excess voltage, enhancing the durability of the display.
LED Displays TIL804-10 attributes and parameters. Explore more LED Displays devices from Texas Instruments
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
TIL804-10 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Transys Electronics
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Continental Device India
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5082-7653
Everlight Electronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Characters: 1; Additional Features: IC COMPATIBLE, HIGH RELIABILITY; Minimum Operating Temperature: -40 Cel; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A;
TIL804
TIL804 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has common cathode configuration, 12 characters, and red color at wavelength. Ideal for applications requiring a display height of 7mm, with max forward voltage of 2.1V and operating temperature range from -20°C to 75°C.
586-4601-103F
Dialight
SINGLE COLOR LED DISPLAY CLUSTER; Maximum Operating Temperature: 85 Cel; Color: RED; Minimum Operating Temperature: -30 Cel; No. of Functions: 1; Display Height: 24.89 mm;
HDSP-2133-JKD00
Broadcom
Broadcom's HDSP-2133-JKD00 is a 5x7 dot matrix LED display with peak wavelength of 568nm. With 8 functions and high performance green color, it offers max luminous intensity of 13.98mcd. Ideal for applications requiring compact displays with bright green output in temperature range -55 to 85°C.
HDSP-A901
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Color: GREEN; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .015 A; Maximum Operating Temperature: 100 Cel;
SA04-11EWA
Kingbright Electronic
SA04-11EWA by Kingbright Electronic is a COMMON ANODE, 1 DIGIT LED Display with 0.03A Forward Current and 625nm Peak Wavelength. Ideal for SMART/NORMAL 7 SEG NUMERIC applications, it operates b/w -40 to 85 °C displaying HIGH EFFICIENCY RED color at 10.16mm height.
HCMS-2905
Broadcom's HCMS-2905 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring compact, high-quality red displays in harsh environments.
TIL368
TIL368 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has 4 characters, green color, and 13mm display height. With max forward voltage of 3.5V, it operates b/w -25°C to 85°C, ideal for digital displays in various electronic applications.
HDSP-H101
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 645; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
ELSF-512SYGWA/S530-E2/S290
ELSF-512SYGWA/S530-E2/S290 by Everlight Electronics is a COMMON ANODE, MULTIPLEXED 4-digit LED display with a max forward current of 0.025A. It features SMART/NORMAL 7 SEG NUMERIC LEDs in BRILLIANT YELLOW GREEN color, suitable for applications requiring a display height of 14.22mm and operating temperatures ranging from -40°C to 105°C.
TIL380-9
TIL380-9 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. Common Cathode configuration, red color at 3mm display height. Operating temp range -25 to 85°C, max forward voltage of 2.1V. Ideal for applications requiring numeric displays in various electronic devices.
SMC-393LEG/W
American Opto Plus Led
LED Displays;
HDLO-1414
Broadcom's HDLO-1414 is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color at 3.7mm height. Ideal for applications requiring a compact, bright and reliable display solution.
TIL384
TIL384 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 4 characters, red color at wavelength, and display height of 3mm. With max forward voltage of 1.9V, it operates b/w -10°C to 70°C making it ideal for digital displays in various electronic applications.
HDSP-2531
HDSP-2531 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 583nm. It has 8 functions, operates b/w -40°C to 85°C, and features yellow color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SL2199
SL2199 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25 °C to 70°C, emitting Green light at peak wavelength of 565nm. With a display height of 14mm and max forward voltage of 2.8V, it's ideal for applications requiring clear numeric displays in various temperature conditions.
HDSP-N151
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 645; No. of Functions: 1; Maximum Forward Current: .04 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
TIL303A
TIL303A by Texas Instruments is a complex LED display with peak wavelength of 660nm. It has max forward current of 0.03A and max forward voltage of 3.8V. Ideal for smart/normal numeric displays, operating b/w 0-70°C, with red color at 6.9mm height.
SA39-11SRWA
Cml Technologies & Kg
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 9.9 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
PSA08-11GWA
The Kingbright Electronic PSA08-11GWA is a COMMON ANODE 16 SEG ALPHANUMERIC LED DISPLAY with peak wavelength of 565nm. It has a max forward current of 0.025A and display height of 20.32mm, ideal for applications requiring green color indication in temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TIL841
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Red; No. of Characters: 2; Display Height: 13 mm; Minimum Operating Temperature: -25 Cel;
TIL833
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2 V; Peak Wavelength (nm): 655; Configuration: Common Cathode; Display Height: 13 mm; Color At Wavelength: Red;
TIL807
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; No. of Characters: 2; Maximum Forward Voltage: 2 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
TIL839
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2 V; Configuration: Common Anode; Display Height: 13 mm; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
TIL835
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Display Height: 13 mm; Maximum Forward Voltage: 2 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red;
TIL831
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Display Height: 13 mm; Peak Wavelength (nm): 655; Maximum Operating Temperature: 85 Cel; No. of Characters: 4;
TIL842
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 2 V; No. of Characters: 2; Configuration: Common Anode; Peak Wavelength (nm): 655;
TIL834
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2 V; Display Height: 13 mm; Configuration: Common Cathode; Peak Wavelength (nm): 655;
TIL808
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Display Height: 8 mm; No. of Characters: 2; Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel;
TIL838
7 SEG NUMERIC LED DISPLAY; Display Height: 7 mm; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; No. of Characters: 5; Maximum Forward Voltage: 2 V;
TIL836
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; No. of Characters: 4; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red;
TIL830
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 655; Maximum Forward Voltage: 2 V; Configuration: Common Cathode;
TIL840
7 SEG NUMERIC LED DISPLAY; Display Height: 13 mm; No. of Characters: 2; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 655; Color At Wavelength: Red;
TIL804-8
7 SEG NUMERIC LED DISPLAY; No. of Characters: 8; Maximum Operating Temperature: 75 Cel; Configuration: Common Cathode; Peak Wavelength (nm): 655; Minimum Operating Temperature: -20 Cel;
TIL832
7 SEG NUMERIC LED DISPLAY; Display Height: 13 mm; Maximum Operating Temperature: 85 Cel; Configuration: Common Cathode; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red;
7 SEG NUMERIC LED DISPLAY; No. of Characters: 12; Display Height: 7 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel; Color At Wavelength: Red;
TIL804-12
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Maximum Operating Temperature: 75 Cel; Configuration: Common Cathode; No. of Characters: 12; Minimum Operating Temperature: -20 Cel;
TIL829
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Minimum Operating Temperature: -25 Cel; Peak Wavelength (nm): 655; Color At Wavelength: Red; Maximum Forward Voltage: 2 V;
TIL837
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Peak Wavelength (nm): 655; Maximum Forward Voltage: 2 V; No. of Characters: 5; Maximum Operating Temperature: 75 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved