Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA5035 by Onsemi is an 8x8 dot matrix LED display with peak wavelength of 660nm. It features common anode configuration, red color at wavelength, and 20mm display height. Ideal for applications requiring temperature range from -20 °C to 50°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Problanco Electronics
TANS Electronics
Corphita
Kulean Microsystems
UHIMA Technologies
Corohmni
Common Anode configuration allows for easier circuit design and integration with other components, making the product more versatile and user-friendly.
The peak wavelength of 660 nm indicates a vibrant red color, providing clear and visually appealing display output.
The 8 X 8 dot matrix configuration offers high resolution and flexibility in displaying various characters, symbols, and graphics, making it suitable for diverse applications.
With a high maximum operating temperature of 50 °C, the product can withstand heat stress in demanding environments, ensuring reliability and longevity.
The low minimum operating temperature of -20 °C allows the product to operate efficiently even in cold conditions, making it suitable for a wide range of applications.
The red color output provides high visibility and aesthetic appeal, making the display easily noticeable and attractive to viewers.
With a display height of 20 mm, the product offers clear and legible information presentation, making it ideal for applications where visibility is crucial.
LED Displays SLA5035 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA5035 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
EU2B-YS303C
Idec
ROTARY SWITCH;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Won-top Electronics
HDSP-5551
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Peak Wavelength (nm): 635; Color At Wavelength: Red;
DSM7UA56101
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
LTD-5521AB
Lite-on Technology
Lite-on Technology's LTD-5521AB is a COMMON ANODE, 2 DIGIT LED display with decimal point. Featuring SMART/NORMAL 7 SEG NUMERIC LEDs, it has a max forward current of 0.025 A. With blue color and 14.22 mm height, it operates b/w -35 to 85 °C, ideal for digital clocks and timers.
SA52-11EWA
Kingbright Electronic
SA52-11EWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current, emitting HIGH EFFICIENCY RED light at 625nm. Ideal for applications requiring a compact display with decimal point, operating b/w -40°C to 85°C.
HDSP-A901
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .015 A; Color: GREEN; No. of Characters: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
HDSP-7801
Broadcom
Broadcom's HDSP-7801 LED display features COMMON ANODE configuration, 7.6mm height, and peak wavelength of 566nm. Ideal for applications requiring a SMART/NORMAL 7 SEG NUMERIC display with green color output. Operates b/w -40 to 100°C, consuming max current of 0.03A at 2.5V forward voltage.
HDSP-7803-JK000
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Color: GREEN; Maximum Operating Temperature: 100 Cel;
VDMR10A0
Vishay Intertechnology
Vishay Intertechnology's VDMR10A0 is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 639 nm. Ideal for applications requiring a SUPER RED display with 10 mm height, such as digital clocks or electronic meters.
SA23-12SRWA
SA23-12SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring SUPER BRIGHT RED color, it operates b/w -40 to 85 °C and has a display height of 56.9mm. Ideal for applications requiring clear numeric displays in various temperature conditions.
HDSP-U313
HDSP-U313 by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 583nm. It operates at -25 to 90°C, has forward current of 0.02A and voltage of 2.5V. Ideal for applications requiring YELLOW display with 8mm height and decimal point.
TIL314
TIL314 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, green color at 8mm display height. With max forward voltage of 3.5V, it operates b/w -25°C to 85°C, ideal for various electronic applications.
HCMS-2975-HI000
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Additional Features: TTL COMPATIBLE; Display Height: 5.08 mm; Maximum Operating Temperature: 85 Cel; No. of Functions: 8; Configuration: COMPLEX;
HDSP-F513
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.5 V; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 566; Display Height: 10 mm;
SL1042-30T
SL1042-30T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -20 to 60 °C, emitting Red light at peak wavelength of 700nm. With 4 characters and 15mm display height, it has a max forward voltage of 2.4V, suitable for various digital display applications.
HDSP5623
Three-five Systems
HDSP5623 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has common cathode configuration, green color at 14mm display height. Ideal for applications requiring a max forward voltage of 2.5V and operating temperatures ranging from -40°C to 100°C.
HDSP2003LP
Infineon Technologies
HDSP2003LP by Infineon Technologies is a 4mm LED display with peak wavelength of 565nm, ideal for applications requiring green color output. It operates b/w -40°C to 85°C, making it suitable for various environments. The terminal finish is Tin/Lead (Sn/Pb), ensuring reliable connectivity.
TIL829
TIL829 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -25°C to 85°C, emitting Red light at peak wavelength of 655nm. With 4 characters and 13mm display height, it has a max forward voltage of 2V, suitable for various digital display applications.
HCMS-2912
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 635; Color At Wavelength: Red;
HDLO-2416-DE000
Broadcom's HDLO-2416-DE000 is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color and tin terminal finish. Ideal for applications requiring a complex configuration with 4 functions in a compact 5mm display height.
HDSP-U101
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA5105
8 X 8 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 20 mm; No. of Characters: 1;
SLA5145
16 X 16 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1;
SLA5175
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Anode; Peak Wavelength (nm): 567; Display Height: 32 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel;
SLA5232
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red;
SLA5723
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
SLA5724
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode; Display Height: 18 mm; Color At Wavelength: Green/Red; Peak Wavelength (nm): 630;
SLA5733
16 X 16 DOT MATRIX LED DISPLAY; Display Height: 40 mm; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Peak Wavelength (nm): 630; No. of Characters: 1;
SLA5734
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Green/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 40 mm;
SLA5753
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode;
SLA5754
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 32 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel;
SLA5783
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Configuration: Common Anode; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; Color At Wavelength: Green/Red;
SLA5784
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Display Height: 18 mm;
SLA5903
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 61 mm; No. of Characters: 1;
SLA5035
Sanyo Electric
8 X 8 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; JESD-609 Code: e0; Peak Wavelength (nm): 660; Maximum Operating Temperature: 50 Cel;
8 X 8 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Anode; Display Height: 20 mm; Color At Wavelength: Red; Peak Wavelength (nm): 660;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved