Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA5105 by Onsemi is an 8x8 dot matrix LED display with peak wavelength of 660nm. It has common anode configuration, ideal for applications requiring red color at 20mm display height. Operating temperature ranges from -20 °C to 50°C, making it suitable for various LED display projects.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
Corohmni
UHIMA Technologies
Common Anode configuration allows for easier control and synchronization of multiple LEDs in the display.
Peak wavelength of 660nm ensures a bright and vibrant red color display, enhancing visibility and readability.
8 X 8 Dot Matrix LED display offers versatility in creating various patterns and designs, making it suitable for different applications.
High maximum operating temperature of 50 °C ensures reliability and stability of the LED display even in challenging environments.
Low minimum operating temperature of -20 °C allows the LED display to function effectively in colder climates without any issues.
Specific color output of red ensures consistent and clear display of information, making it suitable for applications where red color is desired.
The 20mm display height offers a clear and visible output, making it ideal for applications where readability is crucial.
LED Displays SLA5105 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA5105 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
International Semiconductor
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Sangdest Microelectronics (Nanjing)
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SMA561LAG/W
American Opto Plus Led
LED Displays;
SA43-11GWA
Kingbright Electronic
SA43-11GWA by Kingbright Electronic is a COMMON ANODE LED Display with 1 digit, 0.025A max forward current, and peak wavelength of 565nm. Ideal for SMART/NORMAL 7 SEG NUMERIC displays in applications requiring green color, operating b/w -40°C to 85°C.
TDCG1060M
Vishay Intertechnology
Vishay Intertechnology's TDCG1060M is a COMMON CATHODE, MULTIPLEXED LED display with 4 digits and decimal point. It operates at -40 to 85°C, with peak wavelength of 575nm in GREEN color. Ideal for clock displays, it has a forward current of 0.025A and height of 10mm.
TIL332A
Texas Instruments
TIL332A by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 588nm. It has common anode configuration, orange color at 13mm display height. With max forward voltage of 3V, it operates b/w -25°C to 85°C, ideal for applications requiring bright and clear numeric displays.
AML92ERY
Micro Switch
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Color: RED; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Maximum Forward Current: .015 A;
5082-7663
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Yellow; JESD-609 Code: e1; Peak Wavelength (nm): 583;
HDLO-1414
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Peak Wavelength (nm): 635; No. of Functions: 4; Color: HIGH EFFICIENCY RED;
HDSP-7503-DD000
Broadcom
Broadcom's HDSP-7503-DD000 LED display features common cathode configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays, it operates b/w -40 to 100°C, with a 7.6mm height and high efficiency red color for applications requiring clear visibility.
HDSP-516Y
HDSP-516Y by Broadcom is a COMMON CATHODE LED Display with 1 digit and decimal point. Featuring a peak wavelength of 583nm, it operates b/w -40°C to 100°C. Ideal for SMART/NORMAL 7 SEG NUMERIC applications due to its yellow color and 13mm display height.
HDSP-5501-GH000
HDSP-5501-GH000 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 635nm. It has a max forward current of 0.03A and display height of 14.22mm, suitable for applications requiring HIGH EFFICIENCY RED color indication in temperature range -40 to 100°C.
HDSP-303E
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 80 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0; Display Height: 10 mm;
ACSC03-41SGWA-F01
Kingbright Electronic's ACSC03-41SGWA-F01 is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with 0.025 A forward current. Featuring a 7.62 mm display height, it operates b/w -40 to 85 °C and emits SUPER BRIGHT GREEN light. Ideal for applications requiring smart/normal numeric displays with decimal points.
TIL369
TIL369 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 590nm and orange color. It has 4 characters, 13mm display height, max forward voltage of 3.5V, and operates b/w -25°C to 85°C. Ideal for applications requiring bright orange numeric displays in various electronic devices.
SL2524
The Onsemi SL2524 is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -20 °C to 65°C, ideal for applications requiring green light at 8mm display height and up to 5 characters. Perfect for electronic devices needing clear numeric displays in various environments.
HDSP-4205
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 583; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
HDSP-A153
HDSP-A153 by Broadcom is a red LED display with common cathode configuration. It has a display height of 7.6mm and operates at temperatures ranging from -20°C to 100°C. With a max forward current of 0.04A and peak wavelength of 645nm, it is ideal for numeric displays in various electronic applications.
TIL842
TIL842 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25°C to 85°C, emitting Red light at peak wavelength of 655nm. With 2 characters and 13mm display height, it has a max forward voltage of 2V, suitable for various digital display applications.
SLA9744
SLA9744 by Onsemi is a 16x16 Dot Matrix LED Display with common cathode configuration. It operates b/w -20 °C to 50°C, emitting red light at peak wavelength of 630nm. With a display height of 32mm, it finds applications in various LED display projects.
SLA5784
SLA5784 by Onsemi is a Common Cathode LED Display with peak wavelength of 565nm. It features SMART/NORMAL 5x7 dot matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring green/red display, with a height of 18mm.
HDLG-2416
HDLG-2416 by Broadcom is a SMART/NORMAL 5x7 dot matrix LED display with peak wavelength of 568nm. It has 4 functions, operates b/w -40°C to 85°C, and features green color at a height of 5.08mm. Ideal for applications requiring complex configurations and high visibility in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA5035
8 X 8 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 660; Color At Wavelength: Red; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
SLA5145
16 X 16 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1;
SLA5175
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Anode; Peak Wavelength (nm): 567; Display Height: 32 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel;
SLA5232
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red;
SLA5723
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
SLA5724
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode; Display Height: 18 mm; Color At Wavelength: Green/Red; Peak Wavelength (nm): 630;
SLA5733
16 X 16 DOT MATRIX LED DISPLAY; Display Height: 40 mm; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Peak Wavelength (nm): 630; No. of Characters: 1;
SLA5734
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Green/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 40 mm;
SLA5753
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode;
SLA5754
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 32 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel;
SLA5783
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Configuration: Common Anode; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; Color At Wavelength: Green/Red;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Display Height: 18 mm;
SLA5903
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 61 mm; No. of Characters: 1;
Sanyo Electric
8 X 8 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; JESD-609 Code: e0; Peak Wavelength (nm): 660; Maximum Operating Temperature: 50 Cel;
SLA5105
8 X 8 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Anode; Display Height: 20 mm; Color At Wavelength: Red; Peak Wavelength (nm): 660;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved