Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA5784 by Onsemi is a Common Cathode LED Display with peak wavelength of 565nm. It features SMART/NORMAL 5x7 dot matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring green/red display, with a height of 18mm.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
TANS Electronics
Corohmni
UHIMA Technologies
Common cathode configuration makes the product compatible with a wide range of circuits and easier to integrate into existing systems.
The peak wavelength of 565nm ensures a bright and vibrant display, making it ideal for applications where visibility is key.
The SMART/NORMAL 5 X 7 DOT MATRIX LED display type offers versatility in displaying characters, symbols, and graphics, allowing for a wide range of applications.
With a maximum operating temperature of 50 °C, this LED display can handle higher temperatures without compromising performance, ensuring reliability in various environments.
The minimum operating temperature of -20 °C enables this LED display to function in cold conditions, making it suitable for outdoor or industrial applications.
The dual-color (green/red) display option allows for versatile and customizable visual outputs, catering to different design and branding requirements.
With a display height of 18mm, this LED display offers clear and easy-to-read information, making it suitable for applications where visibility at a distance is essential.
LED Displays SLA5784 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA5784 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Wuxi Xuyang Electronic
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
HCMS-2904
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; No. of Functions: 4; JESD-609 Code: e0; Display Height: 3.71 mm;
SA04-11EWA
Kingbright Electronic
SA04-11EWA by Kingbright Electronic is a COMMON ANODE, 1 DIGIT LED Display with 0.03A Forward Current and 625nm Peak Wavelength. Ideal for SMART/NORMAL 7 SEG NUMERIC applications, it operates b/w -40 to 85 °C displaying HIGH EFFICIENCY RED color at 10.16mm height.
HDSP-K123
Broadcom
The Broadcom HDSP-K123 LED display features 2 digits with decimal point, common cathode configuration, and peak wavelength of 645nm. Ideal for smart/normal numeric displays in applications requiring red color output. Operates b/w -20°C to 100°C with a max forward current of 0.015A and voltage of 2.2V.
HDSP-H101
HDSP-H101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It has a max forward current of 0.015A and display height of 14.2mm. Ideal for applications requiring a red color display, it operates b/w -20 to 100°C temperatures.
HDSP-U303
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
HDSP7511
Infineon Technologies
Infineon's HDSP7511 is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration, emitting Red light at 635nm. It operates b/w -40°C to 100°C, making it suitable for various applications requiring an 8mm display height.
5082-7650
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN SILVER COPPER; JESD-609 Code: e1; No. of Characters: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 100 Cel;
HDSP-7403-DE000
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .02 A; Minimum Operating Temperature: -40 Cel; Color: YELLOW; No. of Functions: 1;
ACSA03-41SGWA-F01
Kingbright Electronic's ACSA03-41SGWA-F01 is a COMMON ANODE 7-segment LED display with 0.025 A forward current. Featuring a 7.62mm display height, it operates b/w -40°C to 85°C and emits SUPER BRIGHT GREEN light. Ideal for numeric displays in various applications.
HDSP-A22C
16 SEG ALPHANUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Color At Wavelength: Orange-Red; Display Height: 13.8 mm; Minimum Operating Temperature: -40 Cel;
PSA23-11SRWA
Kingbright
16 SEG ALPHANUMERIC LED DISPLAY; Display Height: 56.8 mm; Color: SUPER BRIGHT RED; Maximum Forward Current: .03 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel;
HDSP-7401
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 7.6 mm; Maximum Forward Voltage: 2.5 V; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
HCMS-3917
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 3.71 mm; Maximum Forward Voltage: 3.3 V; Maximum Operating Temperature: 85 Cel; Configuration: COMPLEX;
HDLO-1414
Broadcom's HDLO-1414 is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color at 3.7mm height. Ideal for applications requiring a compact, bright and reliable display solution.
5082-7663
Broadcom's 5082-7663 LED display features COMMON CATHODE configuration, 1 DIGIT WITH DECIMAL POINT. With a peak wavelength of 583nm and max forward current of 0.02A, it is ideal for SMART/NORMAL 7 SEG NUMERIC applications. Operating b/w -40 to 100°C, this YELLOW display has a height of 10.92mm and requires a max forward voltage of 2.5V.
SL8139
Onsemi
SL8139 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 600nm. It has common anode configuration, red color at wavelength, and 25mm display height. Ideal for applications requiring temperature range from -25 °C to 70°C.
PSA08-11GWA
16 SEG ALPHANUMERIC LED DISPLAY; Maximum Forward Current: .025 A; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: GREEN; No. of Functions: 1;
SL2249G
SL2249G by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -20 °C to 65°C, displaying green color at 15mm height. Ideal for applications requiring compact, high visibility numeric displays in various temperature conditions.
LDT-C514RI
Lumex
Lumex LDT-C514RI LED display features 3-digit common cathode configuration with peak wavelength of 635nm. With max forward current of 0.03A, it is ideal for numeric displays in applications requiring orange/red color output. Operating temperature ranges from -40°C to 85°C, making it suitable for various environments.
HDLU-1414
Broadcom's HDLU-1414 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, featuring red color at 3.7mm height. Ideal for applications requiring a compact, high-performance LED display with four functions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA5035
8 X 8 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 660; Color At Wavelength: Red; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
SLA5105
8 X 8 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 20 mm; No. of Characters: 1;
SLA5145
16 X 16 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1;
SLA5175
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Anode; Peak Wavelength (nm): 567; Display Height: 32 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel;
SLA5232
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red;
SLA5723
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Peak Wavelength (nm): 630; Color At Wavelength: Green/Red; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel; No. of Characters: 1;
SLA5724
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode; Display Height: 18 mm; Color At Wavelength: Green/Red; Peak Wavelength (nm): 630;
SLA5733
16 X 16 DOT MATRIX LED DISPLAY; Display Height: 40 mm; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Peak Wavelength (nm): 630; No. of Characters: 1;
SLA5734
16 X 16 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Green/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 40 mm;
SLA5753
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode;
SLA5754
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Display Height: 32 mm; No. of Characters: 1; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel;
SLA5783
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Configuration: Common Anode; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Display Height: 18 mm; Color At Wavelength: Green/Red;
SLA5903
16 X 16 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 61 mm; No. of Characters: 1;
Sanyo Electric
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 50 Cel; Color At Wavelength: Green/Red; Configuration: Common Cathode; JESD-609 Code: e0;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; No. of Characters: 1; Display Height: 18 mm; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Configuration: Common Cathode; No. of Characters: 1; Peak Wavelength (nm): 630; Maximum Operating Temperature: 50 Cel; Color At Wavelength: Green/Red;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Display Height: 18 mm; Color At Wavelength: Green/Red; Peak Wavelength (nm): 565;
SLA5784
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 18 mm; Color At Wavelength: Green/Red; No. of Characters: 1;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; Color At Wavelength: Green/Red; Minimum Operating Temperature: -20 Cel; Display Height: 40 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Cathode; Display Height: 32 mm; Color At Wavelength: Green/Red; Maximum Operating Temperature: 50 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved