Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SN75115NE4 by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It offers differential input/output characteristics, 75ns max transmit/receive delay, and operates in commercial temperature range. Ideal for applications requiring high-speed data transmission over long distances.
Median Price
$3.464
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$3.288
100+ parts
$2.083
1k+ parts
$1.872
10k+ parts
-
Mouser Electronics
$5.940
$3.770
$3.430
Rochester
$2.760
$2.470
$2.330
DigiKey
$3.640
Digiode
$2.280
Vyrian
DigiKey Marketplace
$1.840
Corphita
$2.160
Parana Technologies
$7.449
$7.938
DigiPath Technology Company
$8.203
ChromeModa Solutions
$8.370
$6.863
IDEA Electronic Components Group
$7.952
$7.533
Kepictronics
The use of plastic/epoxy material makes the package lightweight and durable, ideal for applications where weight is a concern.
The high maximum supply voltage allows for versatility in different electronic systems that may require higher voltage levels.
Having multiple functions in a single device increases efficiency and saves space in circuit designs.
The rectangular shape of the package makes it easy to mount and fit into standard circuit board layouts.
The low transmit delay ensures fast and reliable data transmission, critical in high-speed communication systems.
Operating with a common supply voltage of 5V simplifies the design and power management of the overall system.
Having a sufficient number of terminals allows for versatile connectivity options with other components in the circuit.
The in-line package style is space-efficient and easy to integrate into existing systems with minimal modifications.
The low minimum supply voltage ensures reliable operation even under varying voltage conditions.
With a high maximum operating temperature, this product can perform reliably in challenging environmental conditions.
Line Drivers & Receivers SN75115NE4 attributes and parameters. Explore more Line Drivers & Receivers devices from Texas Instruments
Additional Features:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
SN75115NE4 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Micro Commercial Components
ISL3283EIHZ-T
Intersil
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
SP3232EBCN-L/TR
Sipex
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN75LBC176DRG4
SN75LBC176DRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 25ns transmit delay, and 33ns receive delay. Ideal for EIA-485-A, TIA-485-A, ISO 8482 interfaces in commercial temperature grade applications requiring differential output and Schmitt trigger input characteristics.
SN65HVD70DGSR
SN65HVD70DGSR by Texas Instruments is a line driver/receiver with a supply voltage range of 3V to 3.6V, operating temperature from -40°C to 125°C, and EIA-485 interface standard. It features differential output, dual terminal position, and Schmitt trigger input characteristics. Ideal for automotive applications requiring reliable data transmission in harsh environments.
AD8138ARZ-R7
Analog Devices
AD8138ARZ-R7 by Analog Devices is a Line Driver with 8 terminals, operating at -40 to 85 °C. It has a supply voltage range of 1.4V to 5.5V and offers differential output for industrial applications requiring high-speed signal transmission. The package style is small outline, making it suitable for surface mount designs in various electronic systems.
SN65HVD78DGKR
SN65HVD78DGKR by Texas Instruments is a line driver/receiver with a max supply voltage of 3.6V, operating temperature range of -40 to 125°C, and differential output interface. It is ideal for automotive applications requiring EIA-422/EIA-485 standards compliance and features a small outline package with dual terminals for compact designs.
MAX232ACSE+T
Maxim Integrated
SP3485CN-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3485ESA
MAX3485ESA by Maxim Integrated is a CMOS Line Transceiver with 3.3V supply, 35ns max transmit delay, and EIA-422/EIA-485 interface. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
MAX3232ECPE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MAX1480BCPI+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
FIN1104MTC
Fairchild Semiconductor
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
ISL3280EIHZ-T7A
Renesas Electronics
LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;
SN65HVD1782DRG4
SN65HVD1782DRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at -40 to 105 °C. It has a max supply voltage of 5.5 V and differential output polarity. Ideal for industrial applications requiring EIA-485-A interface standard compliance.
SP3232EEY-L
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
LTC2858HMS-1#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SP485EN-L
Exar
Exar's SP485EN-L is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can withstand industrial temperatures from -40 to 85°C. Ideal for applications requiring differential output and Schmitt trigger input characteristics in compact designs.
MAX202ECSE+
MAX202ECSE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max supply voltage of 5.5V, output polarity is inverted, and uses CMOS technology. Ideal for EIA-232-E, TIA-232-E, V.28 interfaces in commercial temperature grade applications.
MAX3221EIDBR
MAX3221EIDBR by Texas Instruments is a line driver/receiver with 16 terminals and operates at supply voltages of 3.3/5V. It features Schmitt trigger input characteristics, EIA-232-F/TIA-232-F/V.28 interface standards, and a max receive delay of 150ns. Ideal for industrial applications requiring reliable data transmission over long distances.
MAX3232ECPWR
MAX3232ECPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring reliable communication over long distances in commercial temperature environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SN75176BDR
SN75176BDR by Texas Instruments is a line driver/receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and differential output. Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in commercial temperature applications.
SN75176BDRG4
SN75176BDRG4 by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 22ns max transmit delay, and 70°C max operating temp. Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in commercial applications requiring differential output and Schmitt trigger input characteristics.
SN75176AD
SN75176AD by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 60ns max transmit delay, and 8 terminals. It's used in V.11 and EIA-422-B interfaces for data transmission applications requiring differential output and Schmitt trigger input characteristics.
SN75LVDS83BDGGR
SN75LVDS83BDGGR by Texas Instruments is a 56-terminal line driver with 3.3V power supply, operating from -10 to 70°C. It offers differential outputs, complementary polarity, and CMOS technology for applications requiring high-speed data transmission in commercial-grade environments.
SN75176BDRE4
SN75176BDRE4 by Texas Instruments is a Line Driver & Receiver with 8 terminals. It operates at 5V, has a max supply voltage of 5.25V, and supports EIA-422-B and EIA-485-A interfaces. Ideal for applications requiring fast transmission speeds and reliable communication in commercial temperature environments.
SN75176BP
SN75176BP by Texas Instruments is a line driver/receiver with 5V supply, 22ns transmit delay, and 35ns receive delay. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces in commercial temperature applications.
SN75176ADR
SN75176ADR by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 60ns max transmit delay, and 8A max output low current. It is used in V.11 and EIA-422-B interface standards for commercial temperature grade applications.
SN75176BD
SN75176BD by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and operates in commercial temperature range. Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in various applications requiring bipolar technology and differential output.
SN75HVD12DR
SN75HVD12DR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 300ns max transmit delay, and 70°C max operating temp. Ideal for EIA-485-A, TIA-485-A, ISO 8482 interfaces in commercial-grade applications requiring differential output and Schmitt trigger input characteristics.
SN75LBC176DR
SN75LBC176DR by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 25ns max transmit delay, and 1.5mA max supply current. Ideal for EIA-485-A, TIA-485-A, ISO 8482 interfaces in commercial temperature grade applications requiring BICMOS technology for differential Schmitt trigger inputs.
SN75176BPSR
SN75ALS176DR
SN75ALS176DR by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 13ns and differential output interface. Ideal for applications requiring EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A standards compliance in commercial temperature range.
SN75179BDR
SN75179BDR by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 22ns and differential output. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interfaces in commercial temperature grade applications.
SN75176ADRG4
SN751178NSR
SN751178NSR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 25ns and differential output for EIA-422-B, TIA-422-B, EIA-485-A interfaces. Ideal for applications requiring fast signal transmission in industrial settings.
SN751178NSRE4
SN751178NSRE4 by Texas Instruments is a Line Driver & Receiver with 2 functions. It operates at 5V, has a max transmit delay of 25ns, and supports EIA-422-B, TIA-422-B, EIA-485-A interfaces. Ideal for applications requiring differential outputs and Schmitt trigger inputs in compact designs.
SN751178NSRG4
SN751178NSRG4 by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 25ns and differential output for EIA-422-B, TIA-422-B, EIA-485-A interfaces. This IC is ideal for applications requiring fast signal transmission in industrial settings.
SN75ALS181NSRG4
SN75ALS181NSRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 20ns transmit delay, and 25ns receive delay. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces in commercial temperature applications.
SN75ALS181NSR
SN75ALS181NSR by Texas Instruments is a TTL technology line transceiver with 14 terminals. It operates at 5V, has a max supply voltage of 5.25V, and supports EIA-422-B, TIA-422-B, EIA-485-A interfaces. With a small outline package style and differential output, it's ideal for applications requiring fast transmission speeds and reliable signal reception in commercial temperature environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved