Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SN65LVDT2DG4 by Texas Instruments is a Line Receiver IC with 8 terminals, operating at -40 to 85°C. It features a max transmit delay of 3.1 ns and operates on power supplies of 2.5/3.3 V, making it ideal for industrial applications requiring fast signal transmission in compact spaces.
Median Price
$4.120
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.100
1k+ parts
$1.380
10k+ parts
-
Digiode
$3.486
Vyrian
Corphita
$3.303
Parana Technologies
$6.427
$7.173
DigiPath Technology Company
$7.077
ChromeModa Solutions
$7.221
$5.921
IDEA Electronic Components Group
$6.499
QUARKTWIN TECHNOLOGY LTD
Microchip USA
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable or rugged applications.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and space in assembly.
With a maximum supply voltage of 3.6 V, this product can handle a wide range of input voltages, providing flexibility in usage.
The rectangular package shape is standardized and compatible with most circuit board layouts, making integration seamless.
The low maximum transmit delay ensures fast and reliable data transmission, crucial for high-speed communication systems.
The high maximum operating temperature allows the product to be used in a variety of environments, including industrial settings.
The use of TTL technology ensures compatibility with a wide range of systems, providing versatility and ease of integration.
The nominal supply voltage of 3.3 V is commonly used in many electronic devices, making this product a universal choice for various applications.
Line Drivers & Receivers SN65LVDT2DG4 attributes and parameters. Explore more Line Drivers & Receivers devices from Texas Instruments
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
SN65LVDT2DG4 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
Panjit International
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Plessey Semiconductors Discrete Components Div
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Kingwell Technonlogy
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SP485EN-L/TR
Sipex
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SN65LBC179QDRG4
SN65LBC179QDRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 18ns transmit delay, and -40 to 125°C operating temperature. Ideal for automotive applications, it features differential output, EIA-485/ISO 8482 interface standards, and Schmitt trigger input characteristics.
ADM2483BRWZ-REEL
Analog Devices
ADM2483BRWZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating voltage range of 2.7V to 5.5V, and max transmit delay of 620ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards in harsh environments due to its wide temperature range from -40°C to 85°C.
SP3485EN-L
Exar
Exar's SP3485EN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it is ideal for industrial applications requiring reliable communication over short distances.
MAX22025AWA+T
Maxim Integrated
Line Driver or Receivers; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
ADM101EARMZ-REEL7
ADM101EARMZ-REEL7 by Analog Devices is a Line Driver & Receiver with 5V power supply, operating temperature range of -40 to 85°C, and EIA-232 interface standard. It features BICMOS technology, Schmitt trigger input characteristics, and 1.6A max output low current. Ideal for industrial applications requiring reliable communication over short distances.
LTC485IS8#PBF
LTC485IS8#PBF by Analog Devices is a CMOS line driver & receiver with EIA-422/EIA-485 interface. It has 1 function, operates at -40 to 85°C, and supports differential output. It is commonly used in industrial applications for transmitting data over long distances.
MAX3485EESA-T
MAX3485EESA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.
SN65C1168EPWR
SN65C1168EPWR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features EIA-422-B, TIA-422-B, V.11 interface standard and differential output for industrial applications. With a max supply voltage of 5.5V and transmit delay of 16ns, it offers reliable performance in various communication systems.
ISL3170EIUZ-T
Intersil
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADM3101EACPZ-REEL
ADM3101EACPZ-REEL by Analog Devices is a CMOS Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and EIA-232 interface standard. Ideal for industrial applications requiring high-speed data transmission over long distances with its SCHMITT TRIGGER input characteristics and quad terminal position.
ICL3221EIAZ-T7A
Integrated Device Technology
LINE TRANSCEIVER;
DS2480B+T&R
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LT1785AIS8#PBF
LT1785AIS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating voltage range of 4.75-5.25 V, and differential output. It has a max transmit delay of 2000 ns and receive delay of 900 ns, suitable for EIA-422/EIA-485 interface applications in industrial settings.
SP3072EEN-L
Maxlinear
MAX3232CPWRG4
MAX3232CPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.
SN65LVDS1DBVT
SN65LVDS1DBVT by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 8mA max supply current. Ideal for industrial applications requiring TTL technology, EIA-644-A interface standard, and true output polarity in a compact package style.
ADM3202ARUZ-REEL7
ADM3202ARUZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and 1.6A max output current. Ideal for industrial applications, it operates in temperatures ranging from -40 to 85°C, featuring EIA-232-E interface standard and CMOS technology for reliable communication.
MAX3232CDBR
MAX3232CDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for applications requiring reliable data transmission in commercial temperature range from 0 to 70°C.
SP485EEN-L/TR
Exar's SP485EEN-L/TR is a BICMOS line transceiver with EIA-485/EIA-422 interface standard. It operates at 5V, has 8 terminals, and offers differential output. With a small outline package style, it suits industrial applications requiring fast transmission speeds up to 60ns delay.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
SN65HVD75DR
SN65HVD75DR by Texas Instruments is a line driver & receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.
SN65HVD72DGK
SN65HVD72DGK by Texas Instruments is a Line Transceiver with 8 terminals, operating at 3.3V. It offers EIA-422 and EIA-485 interface standards, with a max supply voltage of 3.6V. Ideal for automotive applications due to its wide temperature range (-40°C to 125°C) and differential output capability.
SN65HVD75DGKR
SN65HVD75DGKR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.
SN65HVD1781DR
SN65HVD1781DR by Texas Instruments is a Line Driver & Receiver with 3.3/5V power supplies, 200ns max transmit delay, and EIA-485-A interface standard. Ideal for automotive applications due to its differential output, operating temperature range of -40 to 125°C, and small outline package style.
SN65HVD72DRBT
SN65HVD72DRBT by Texas Instruments is a Line Transceiver with 8 terminals, operating at 3.3V power supply. It features EIA-422 and EIA-485 interface standards, with a max transmit delay of 1000ns. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C.
SN65HVD72DRBR
SN65HVD72DRBR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 1000ns max transmit delay, and 8A max output low current. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and small outline package style.
SN65HVD1781DRG4
SN65HVD1781DRG4 by Texas Instruments is a line driver/receiver with 5.5V max supply voltage, 200ns max transmit delay, and differential output. Ideal for automotive applications due to its EIA-485-A interface standard and operating temperature range of -40 to 125°C.
SN65LVDS1DBVR
SN65LVDS1DBVR by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for industrial applications requiring differential output and EIA-644-A interface standard compliance.
SN65HVD12DR
SN65HVD12DR by Texas Instruments is an 8-terminal line driver with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features a differential output, EIA-485-A interface standard, and is ideal for industrial applications requiring reliable communication over long distances.
SN65HVD72DR
SN65HVD72DR by Texas Instruments is a line driver & receiver with 3.6V max supply voltage, 1000ns max transmit delay, and 125°C max operating temp. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and differential output for robust communication in harsh environments.
SN65HVD1781DG4
SN65HVD1781DG4 by Texas Instruments is a line driver/receiver with 3.15-5.5V supply, 200ns delay, and differential output. Ideal for automotive applications, it operates b/w -40 to 125°C and complies with EIA-485-A; TIA-485-A standards.
SN65HVD72DGKR
SN65HVD72DGKR by Texas Instruments is a line driver with 3.6V max supply voltage, 1000ns max transmit delay, and 8 Amp max output low current. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output feature.
SN65176BDR
SN65176BDR by Texas Instruments is a line driver & receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and operates in industrial temperature range (-40 to 105°C). Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in various applications requiring differential output and Schmitt trigger input characteristics.
SN65HVD75DGK
SN65HVD75DGK by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 17ns max transmit delay, and 8 Amp max output low current. Ideal for automotive applications, it operates in temperatures from -40 to 125 °C and interfaces using EIA-422/EIA-485 standards.
SN65HVD75DRBR
SN65HVD75DRBR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and operates in temperatures ranging from -40 to 125°C.
SN65HVD3082EDR
SN65HVD3082EDR by Texas Instruments is a line driver/receiver with 5.5V supply voltage, 1300ns transmit delay, and -40 to 85°C operating temperature range. It features differential output for EIA-485-A/TIA-485-A interface standard applications in industrial settings.
SN65HVD78DGKR
SN65HVD78DGKR by Texas Instruments is a line driver/receiver with a max supply voltage of 3.6V, operating temperature range of -40 to 125°C, and differential output interface. It is ideal for automotive applications requiring EIA-422/EIA-485 standards compliance and features a small outline package with dual terminals for compact designs.
SN65HVD10DR
SN65HVD10DR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has a max transmit delay of 16ns and operates in an industrial temperature range. This IC is commonly used as a line transceiver for EIA-485-A, TIA-485-A, and ISO 8482 interfaces.
SN65HVD75DRBT
SN65HVD75DRBT by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 17ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and interfaces using EIA-422/EIA-485 standards.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved