Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC79L15CDE4 by Texas Instruments is a fixed negative single output standard regulator with 15V nominal output voltage. It has a max output current of 0.1A and operates in an input voltage range of 17.5V to 30V. This bipolar technology regulator is suitable for applications requiring stable power supply in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$8.397
$9.030
DigiPath Technology Company
$9.246
$8.507
ChromeModa Solutions
$9.435
$7.737
IDEA Electronic Components Group
$8.963
$8.492
Semicontronic
$13.500
$13.162
$13.095
One Stop Electronics
$14.500
AZTECH Wire
$18.102
Microchip USA
Corohmni
Corphita
This material makes the product lightweight and durable, ideal for portable electronic devices.
Enables easy and efficient installation on circuit boards, saving space and reducing assembly time.
Wide operating temperature range allows for reliable performance in various environmental conditions.
Provides a stable and precise output voltage, suitable for powering sensitive electronic components.
Ensures a consistent output voltage, eliminating the need for manual adjustments.
Capable of delivering a sufficient current for low-power applications, making it versatile for different electronic devices.
Fixed Regulators - Negative Single Output Standard MC79L15CDE4 attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from Texas Instruments
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MC79L15CDE4 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Taiwan Semiconductor
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
MC79L15ACLP
MC79L15ACLP by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
LM79L05ACZ/T7
LM79L05ACZ/T7 by Texas Instruments is a fixed negative single output standard regulator with 3 terminals. It operates at an input voltage range of 7-20V and provides a stable output voltage of 5V with a tolerance of 5%. With a max output current of 0.1A, it is ideal for applications requiring precise voltage regulation in various electronic devices.
TA79008SB
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3.75 %;
L7952CD2T
STMicroelectronics L7952CD2T is a fixed negative single output standard regulator with an output voltage of 5.2 V and max current of 1.5 A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring stable power supply in compact designs.
MC7905ACTG
MC7905ACTG by Onsemi is a fixed negative single output standard regulator with 1A max output current. It offers a nominal output voltage of 5V, max load regulation of 0.1%, and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring stable power supplies in various electronic devices.
TA79005SB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
UA79U20CKTP
UA79U20CKTP by Texas Instruments is a fixed negative single output standard regulator with a nominal output voltage of 20V and max input voltage of 35V. This bipolar technology regulator has a package body material of plastic/epoxy, operates b/w 0-125°C, and is surface mountable. It is commonly used in applications requiring stable power supply with an output voltage of 19-21V.
MC79L15CPRA
MC79L15CPRA by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 15V and max output voltage of 16.5V. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supplies in electronic circuits. The package style is cylindrical with three terminals in a through-hole form, ideal for PCB mounting.
UA7952CKTE
UA7952CKTE by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5.2V and max load regulation of 0.1%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply such as industrial automation and automotive electronics. The package style is small outline with gull wing terminals, offering easy surface mount installation.
MC79L24CPRP
MC79L24CPRP by Onsemi is a fixed negative single output standard regulator with 24V nominal output voltage. It operates b/w 0-125 °C, suitable for applications requiring a min input voltage of 27V and max of 38V. The package style is cylindrical with through-hole terminals and bipolar technology.
TA79007SB
MC79L12ACDE4
MC79L12ACDE4 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7924CT
MC7924CT by Onsemi is a fixed negative single output standard regulator with 24V nominal output voltage and 1A max output current. It has a package style of flange mount, operates b/w 0-125°C, and offers a dropout voltage of 1.3V. Ideal for applications requiring stable power supply in various electronic devices.
MC79L15ABP
MC79L15ABP by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage, -40 to 125 °C operating temperature range, and 0.1A max output current. It is ideal for applications requiring stable voltage regulation in electronic circuits.
UA79U12CKTPR
UA79U12CKTPR by Texas Instruments is a fixed negative single output standard regulator with a nominal output voltage of 12V and max voltage tolerance of 5%. Operating temperature ranges from 0°C to 125°C, making it suitable for various applications requiring stable power supply in electronic devices. Its gull wing terminal form and rectangular package shape with flange mount style offer ease of installation in surface-mount configurations.
L7920ACV
L7920ACV by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 20V and max current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supply in industrial settings. Its through-hole terminal form and rectangular package shape ensure easy installation and reliability in diverse electronic systems.
MC79L12CP
MC79L12CP by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 12V. It has a max output current of 0.1A and operates in temperatures ranging from -10 to 125 °C. This bipolar technology regulator is ideal for applications requiring stable voltage regulation in electronic circuits.
UA7924CKC
UA7924CKC by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 24V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply within a voltage tolerance of 5%.
L7912AB
L7912AB by STMicroelectronics is a fixed negative single output regulator designed for reliable voltage regulation. It features a bipolar technology, 3 terminals, and flange mount packaging. Ideal for applications requiring stable negative voltage supply in electronic circuits.
MC79L18ACPRP
MC79L18ACPRP by Onsemi is a fixed negative single output standard regulator with 18V nominal output voltage and 5% voltage tolerance. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supply in electronic circuits. The through-hole package style and cylindrical shape enhance ease of installation in different devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
MC79M05CDTRKG
MC79M05CDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy surface mounting.
MC79M05CDTG
MC79M05CDTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy mounting on PCBs.
MC79M05BDTRKG
MC79M05BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max output current of 0.5A. It is commonly used in applications requiring a stable and regulated power supply, such as industrial control systems and automotive electronics.
MC79L05ACPG
MC79L05ACPG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. It has a dropout voltage of 1.7V, operates in temperatures from 0 to 125°C, and offers excellent line/load regulation for various electronic applications.
MC79M05BDTG
MC79M05BDTG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage, 0.5A max output current, and -40 to 125°C operating temperature range. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability.
MC79M15CDTRKG
MC79M15CDTRKG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. Operating temperature range from 0 to 125°C makes it suitable for various applications in electronics requiring stable power supply. This surface mount device with gull wing terminals is ideal for compact designs where space is limited.
MC79M15BDTRKG
MC79M15BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in electronic designs.
MC79L05ACDR2G
MC79L05ACDR2G by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC79M15CDTG
MC79M15CDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7912CTG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC79M15BDTG
MC79M15BDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage. It has a max output current of 0.5A and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
MC7915BTG
MC7915BTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supplies. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability.
MC7915CTG
MC7905CTG
MC7905CTG by Onsemi is a fixed negative single output standard regulator with 1A max output current. It has an operating temperature range of 0-125°C and a dropout voltage of 1.3V. Ideal for applications requiring a stable 5V output voltage in various electronic devices.
MC79M12CDTRKG
MC79M12CDTRKG by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage and 0.5A max output current. It operates at an input voltage range of 14.5-30V, has a dropout voltage of 1.1V, and offers excellent line/load regulation for various applications requiring stable power supplies in compact designs.
MC79L05ACDG
MC79L05ACDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
MC79M12BDTRKG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
MC79L05ABDG
MC79L05ABDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation. Its small outline package and surface mount capability enhance ease of integration into compact designs.
MC79L05ABDR2G
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
MC79L05ACDR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved