Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMV324QPW by Texas Instruments is a quad operational amplifier with a max input offset voltage of 7000 uV and max average bias current of 0.25 uA. It is used in automotive applications due to its micropower technology, operating temperature range from -40 to 125 °C, and nominal unity gain bandwidth of 1000 kHz.
Median Price
$0.962
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.620
100+ parts
$1.130
1k+ parts
$0.936
10k+ parts
$0.655
DigiKey
-
$1.050
Rochester
$0.844
$0.700
$0.625
Verical
$0.875
$0.781
Digiode
$0.644
Vyrian
DigiKey Marketplace
Corphita
$0.610
Parana Technologies
$5.720
$6.512
DigiPath Technology Company
$6.298
$5.795
ChromeModa Solutions
$6.427
$5.270
IDEA Electronic Components Group
$5.784
Perfect Parts
Authorized Procurement Solutions
Computer Components Inc. - USA
Provides durability and protection for the internal components of the operational amplifier, ensuring reliability in various operating conditions.
Low input offset voltage helps in minimizing errors in signal processing, making this operational amplifier suitable for precision applications.
Low bias current ensures minimal power consumption and reduces signal distortion, making it ideal for battery-operated devices.
Ease of PCB assembly and space-saving design for compact electronic devices.
High common mode rejection ratio helps in attenuating noise and interference present in the input signals, providing clean output signals.
Operates efficiently at a low supply voltage, making it suitable for low-power applications.
Improved stability and bandwidth control in signal processing applications.
Bipolar technology offers high gain and low noise performance, making this operational amplifier suitable for high-precision applications.
High unity gain bandwidth provides fast signal response and bandwidth for various signal processing applications.
Low supply current consumption for energy-efficient operation, ideal for portable and battery-powered devices.
Operational Amplifiers (Op Amps) LMV324QPW attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Texas Instruments
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
LMV324QPW Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - LM324/LM358 obs 23/Feb/2023
PCN Design/Specification - Design 22/Feb/2022 LMV321/LMV324/LMV358 21/Jul/2020
PCN Packaging - Symbolization Update 28/Nov/2022
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Semiconductors
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Alpha & Omega Semiconductor
LM2904MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA129UB
Burr-Brown Corporation
LT6106HS5#TRMPBF
Analog Devices
LT6106HS5#TRMPBF by Analog Devices is a micropower operational amplifier with low-offset and wideband features. It operates at temperatures from -40 to 125 °C, with a bandwidth of 0.2 MHz. Ideal for automotive applications due to its small size and low power consumption.
INA240A3EDRQ1
Texas Instruments
Texas Instruments' INA240A3EDRQ1 is an Op Amp with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 150°C with a supply voltage of 5V.
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
LM7332MAX/NOPB
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7321MFX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SSOP; Package Shape: RECTANGULAR;
JM38510/13503BGA
Precision Monolithics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Supply Voltage Limit: 22 V;
OPA1678IDR
OPA1678IDR by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 2000 uV, Nominal Voltage of 15 V, and Nominal Unity Gain Bandwidth of 16000 kHz. It is ideal for industrial applications requiring precise signal amplification in a compact package with low bias current and high common mode rejection ratio.
LM324M/NOPB
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM324AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LMC6482IMMX
LMC6482IMMX by Texas Instruments is a dual operational amplifier with low bias current (0.000004 uA) and micropower feature. With a unity gain bandwidth of 1500 kHz, it's ideal for industrial applications requiring high voltage feedback architecture. This CMOS technology op amp operates b/w -40 to 85 °C with a supply voltage range of 3-15 V.
LT6106HS5#TRPBF
LT6106HS5#TRPBF by Analog Devices is a micropower operational amplifier with low-offset and wideband features. It operates at temperatures from -40 to 125 °C, with a bandwidth of 0.2 MHz. Ideal for automotive applications due to its small outline package and voltage-feedback architecture.
LMC6484AIMX/NOPB
LMC6484AIMX/NOPB by Texas Instruments is a CMOS Operational Amplifier with 4 functions, 750uV max input offset voltage, and 82dB nominal CMRR. Ideal for industrial applications due to its low-bias current of 0.000004uA and wide temperature range from -40 to 85°C. Package style is small outline, making it suitable for surface mount designs.
OPA365AIDBVTG4
OPA365AIDBVTG4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It operates at a max supply voltage of 5.5V, offers a nominal unity gain bandwidth of 50kHz, and has a small outline package style suitable for automotive applications.
LM2902M
General Electric Solid State
OP2177ARZ
OP2177ARZ by Analog Devices is a micropower operational amplifier with low-offset and high frequency compensation. It operates at a wide temperature range of -40 to 125 °C, making it suitable for automotive applications. With a max supply voltage of +-15V and unity gain bandwidth of 1300 kHz, it offers precise amplification in compact small outline package style.
LM2904M
LM2904M by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 10000 uV and a nominal voltage of 5 V. This Op Amp operates in industrial temperature range (-40 to 85 °C) and has a unity gain bandwidth of 1000 kHz, suitable for various precision analog applications.
OPA211AIDGKT
OPA211AIDGKT by Texas Instruments is an operational amplifier with a max input offset voltage of 50uV, common mode reject ratio of 120dB, and unity gain bandwidth of 45MHz. Ideal for automotive applications due to its low-offset and wideband features.
LM2904MX by Texas Instruments is a dual operational amplifier with 10000uV max input offset voltage and 70dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85 °C with a supply voltage of +-1.5/+-13/3/26 V. With a small outline package style, it features frequency compensation and 15000 min voltage gain.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMV358IDR
LMV358IDR by Texas Instruments is a dual operational amplifier with a max input offset voltage of 7000 uV and max average bias current of 0.25 uA. It is used in automotive applications due to its micropower technology, operating temperature range from -40 to 125 °C, and nominal unity gain bandwidth of 1000 kHz.
LMV321IDBVR
LMV321IDBVR by Texas Instruments is an Operational Amplifier with a max input offset voltage of 7000uV and a nominal voltage of 2.7V. It is ideal for automotive applications due to its micropower technology, small outline package style, and wide operating temperature range from -40 to 125°C.
LMV321ILT
STMicroelectronics
LMV321ILT by STMicroelectronics is a micropower operational amplifier with a max input offset voltage of 6000 uV and a nominal common mode reject ratio of 95 dB. It operates on supply voltages of 2.7-5 V, making it suitable for automotive applications requiring low power consumption. With a small outline package and BICMOS technology, this op amp offers high performance in compact designs.
LMV358IDT
LMV358IDT by STMicroelectronics is a dual operational amplifier with 95dB CMRR and 1300kHz unity gain bandwidth. Ideal for automotive applications, it operates at -40 to 125°C, consumes only 0.5mA max supply current, and features BICMOS technology in a small outline package.
LMV358IPT
LMV358IPT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 6000 uV and a nominal common mode reject ratio of 95 dB. It operates at a supply voltage of 5 V, making it suitable for automotive applications requiring micropower amplification in compact spaces. This BICMOS technology-based op amp features low bias current and high unity gain bandwidth, ideal for precision signal processing in harsh environments.
LMV358IDRG4Q1
LMV358IDRG4Q1 by Texas Instruments is a dual operational amplifier with 9000uV max input offset voltage, 65dB CMRR, and 1000kHz unity gain bandwidth. Ideal for industrial applications requiring low power consumption and high precision signal amplification in compact designs. This AEC-Q100 qualified op amp operates at -40 to 85°C with a supply voltage range of 2.7-5.5V.
LMV358MM/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LMV358MM/NOPB by Texas Instruments is a dual operational amplifier with 9000uV max input offset voltage and 65dB nominal CMRR. It operates at -40 to 85 °C, with micropower feature and BICMOS technology. Ideal for industrial applications requiring high voltage gain and low bias current.
LMV358AMU8X
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: SQUARE;
LMV324IDR
LMV324IDR by Texas Instruments is a quad operational amplifier with 4 functions, featuring micropower consumption of 0.25 uA bias current and 7000 uV input offset voltage. Ideal for automotive applications due to its small outline package and wide temperature range from -40 to 125 °C. Suitable for surface mount designs with a compact rectangular shape.
LMV358MMX/NOPB
LMV358MMX/NOPB by Texas Instruments is a dual operational amplifier with 9000uV max input offset voltage and 65dB nominal CMRR. It operates at -40 to 85 °C, consumes 0.44mA max supply current, and has a unity gain bandwidth of 1000kHz. Ideal for industrial applications requiring low power consumption and precise signal amplification in compact designs.
LMV358IDRG4
LMV358IDRG4 by Texas Instruments is a dual operational amplifier with micropower consumption of 0.44mA, ideal for automotive applications. It features a max input offset voltage of 7000uV and a nominal unity gain bandwidth of 1000kHz, ensuring high performance in small outline packages. With a wide temperature range from -40 to 125°C, this op amp offers reliable operation in various environments.
LMV321M5X/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LMV321RILT
LMV321RILT by STMicroelectronics is a micropower operational amplifier with a max input offset voltage of 6000 uV. It operates on supply voltages of 2.7-5 V and has a nominal unity gain bandwidth of 1300 kHz. This BICMOS technology-based op amp is ideal for automotive applications due to its low power consumption and small form factor.
LMV358M8G-13
Diodes Incorporated
LMV358IDGKR
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LMV321AS5X
LMV321AS5X by Onsemi is a CMOS Operational Amplifier with 7000uV Max Input Offset Voltage, 70dB Common Mode Reject Ratio, and 320 Min Voltage Gain. Ideal for automotive applications due to its low profile design, it operates at temperatures ranging from -40°C to 125°C and has a unity gain bandwidth of 1200kHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved