Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMR16030SDDAR by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 125°C, and input voltage range from 4.3V to 60V. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of 2500kHz.
Median Price
$3.766
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.672
100+ parts
$2.178
1k+ parts
$1.452
10k+ parts
-
Mouser Electronics
$4.860
$3.150
$3.000
$2.740
DigiKey
$3.087
$2.939
Arrow
$1.820
Nova Conductors
Digiode
$2.538
Chip Stock
Cyclops Electronics Ltd
Vyrian
Sensible Micro Corp
Aztec Data Supply Inc.
$1.510
Ampacity Inc.
$1.550
Aranea Global
$2.134
$2.049
Argo Parts USA
Continental Prestige Electronics
Corphita
$2.405
Advanced Electronics
$2.649
$2.517
Parana Technologies
$13.455
$13.972
DigiPath Technology Company
$14.816
$13.630
ChromeModa Solutions
$15.118
$12.397
IDEA Electronic Components Group
$14.362
$13.606
GreenTree Electronics
iodParts Technologies Inc.
A-Z Elektronik GmbH
ChipstoGo Electronic ltd
Kepictronics
Perfect Parts
Alle Elektronik GmbH
Futuretech Components
Authorized Procurement Solutions
S.R.D Solutions
The use of plastic/epoxy material in the package body makes this product lightweight and durable, ideal for applications where weight and durability are important factors.
The surface mount feature allows for easy and efficient installation on a circuit board, making this product suitable for mass production and automated assembly processes.
The rectangular package shape provides a compact and space-saving design, making it easy to integrate into various electronic devices with limited space.
With 8 terminals, this product offers versatile connectivity options, allowing for flexibility in circuit design and configuration.
The small outline, heat sink/slug, and low profile package style helps in efficient heat dissipation and space optimization, making it suitable for applications with tight thermal constraints.
The high maximum operating temperature ensures reliability and stability even in harsh environments with elevated temperatures.
The low minimum output voltage makes this product suitable for applications requiring precision voltage regulation and low power consumption.
The current-mode control mode offers fast transient response and improved loop stability, making this product ideal for dynamic load changes and varying input voltages.
Switching Regulators & Controllers LMR16030SDDAR attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LMR16030SDDAR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 16/Dec/2022
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Temic Semiconductors
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MC34063ABN
MC34063ABN by STMicroelectronics is an 8-terminal switching regulator with a max output current of 1.5A and a boost switcher configuration. Operating b/w -40 to 85°C, it has a voltage-mode control mode and supports input voltages from 3V to 40V. Ideal for industrial applications requiring efficient power conversion up to 100kHz frequency.
TPS60400DBVTG4
TPS60400DBVTG4 by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.06A and a max switching frequency of 350kHz. Ideal for industrial applications requiring an input voltage range from 1.8V to 5.25V and a min operating temperature of -40°C.
TPS62125DSGR
TPS62125DSGR by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.3A. It operates in voltage-mode control technique, suitable for industrial applications requiring a compact design with a small outline package style. With a wide temperature range from -40°C to 85°C, it offers efficient power management in various electronic devices.
EN5322QI-T
Altera
EN5322QI-T by Altera is a voltage-mode switching regulator with a max output current of 2A and a max switching frequency of 4kHz. It is commonly used in industrial applications due to its temperature grade and moisture sensitivity level.
TPS62040DGQ
TPS62040DGQ by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage ranging from 0.7V to 6V. It is ideal for industrial applications requiring a compact design and high efficiency power management up to 2.2A output current at a max frequency of 1500kHz.
LMZM23600V3SILT
LMZM23600V3SILT by Texas Instruments is a switching regulator with a current-mode control technique, suitable for automotive applications. It offers a max output current of 0.5A, operating temperature range from -40 to 125°C, and supports buck-boost switcher configuration. With a nominal input voltage of 24V and nominal output voltage of 3.3V, it is ideal for compact microelectronic assemblies requiring efficient power management.
LMZM23601SILR
LMZM23601SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its buck-boost configuration, it supports input voltages from 4V to 36V and offers precise current-mode control.
LM5001MAX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
LMZ12003TZX-ADJ/NOPB
LMZ12003TZX-ADJ/NOPB by Texas Instruments is a switching regulator with a max output current of 3A and a max operating temperature of 125°C. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TPS54062DGKR
TPS54062DGKR by Texas Instruments is a switching regulator with a max output voltage of 58V and max output current of 0.05A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style ideal for space-constrained designs.
LTC3892EUH-2#PBF
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMR62014XMF/NOPB
LMR62014XMF/NOPB by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 125°C and supports input voltage range of 2.7-14V, output voltage from 3-20V, and has a max switching frequency of 1600 kHz. Ideal for automotive applications due to its compact size and current-mode control technique.
LM2674M-5.0/NOPB
LM2674M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a small outline package style and offers a wide input voltage range from 6.5V to 40V, making it ideal for various power supply designs.
LM60430ARPKR
LM60430ARPKR by Texas Instruments is a switching regulator with 3A max output current, 1-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level, -40 to 150°C operating temperature range, and compact chip carrier package style.
TPS40210DGQG4
TPS40210DGQG4 by Texas Instruments is a current-mode switching regulator with a 7-9V output range, ideal for automotive applications. Operating from -40 to 125°C, it supports input voltages from 4.5 to 52V and offers a max switching frequency of 1MHz. The compact package features a small outline design with dual terminals and Gull Wing form factor.
LMZ14203HTZE/NOPB
LMZ14203HTZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 5-24V output voltage range, and 6-42V input voltage range. It operates in voltage-mode control with a max switching frequency of 1MHz. Ideal for automotive applications due to its -40 to 125°C temperature grade and small outline package style.
LMZ31704RVQT
LMZ31704RVQT by Texas Instruments is a current-mode switching regulator with 4A output current, 1.8V nominal output voltage, and 1200kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact chip carrier package style.
LM2675N-5.0/NOPB
LM2675N-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output voltage of 37V and can handle up to 1A output current. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LMR14006YDDCR
LMR14006YDDCR by Texas Instruments is a switching regulator with a max output voltage of 30V and max output current of 0.6A, suitable for automotive applications. Operating temperature ranges from -40 to 125°C, making it ideal for various environments. Control mode is current-mode with pulse width modulation technique for efficient power management.
LMR54410DBVR
LMR54410DBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It supports input voltages from 4-36V and outputs up to 1A at 28V. With a compact design and pulse frequency modulation control, it's ideal for applications requiring efficient power conversion in limited space.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
LMR16006XDDCR
LMR16006XDDCR by Texas Instruments is a switching regulator with 6 terminals, operating from -40 to 125°C. It offers a max output voltage of 55V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique.
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
LMR16006YDDCT
LMR16006YDDCT by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and wide operating temperature range (-40°C to 125°C).
LMR14203XMKE/NOPB
LMR14203XMKE/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control mode, and can handle up to 0.3A output current. Ideal for automotive applications due to its compact size and wide input voltage range of 4.5-42V.
LMR14206XMKE/NOPB
LMR14206XMKE/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.6A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LMR14206XMKX/NOPB
LMR14206XMKX/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control mode, and can handle up to 0.6A output current. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 1500kHz.
LMR14203XMKX/NOPB
LMR14203XMKX/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, operating temp range -40 to 125°C, and max output current of 0.3A. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
LMR16006YDDCR
LMR16006YDDCR by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range from 4V to 60V.
LMR14206XMK/NOPB
LMR14206XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.765V to 34V. It is designed for automotive applications, featuring a compact rectangular package with very thin profile suitable for surface mount assembly. The control mode is current-mode PWM with max output current of 0.6A and switching frequency up to 1500kHz.
LMR16030PDDAR
LMR16030PDDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C. This compact device offers pulse width modulation control technique and operates at a max switching frequency of 2500 kHz.
LMR14010ADDCR
LMR14010ADDCR by Texas Instruments is a small outline, thin profile switching regulator with 6 terminals. It operates b/w -40 to 125°C, supporting input voltages from 4-40V and output currents up to 1A. Ideal for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a max frequency of 700kHz.
LMR14203XMK/NOPB
LMR14203XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.3A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LMR16006YQDDCRQ1
LMR16006YQDDCRQ1 by Texas Instruments is a small outline switching regulator with 6 terminals. It operates b/w -40 to 125 °C and supports input voltage from 4-40 V, output voltage from 0.8-36 V, and current up to 0.6 A. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LMR14050SDDA
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR14050SDDAR
LMR14030SDDA
LMR14030SDDA by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 36V and current of 3.5A, suitable for automotive applications due to its low profile design and pulse width modulation control technique. With a compact size of 4.9mm x 3.9mm x 1.7mm, it is ideal for space-constrained environments requiring efficient power management up to 2500kHz switching frequency.
LMR16006YQ5DDCRQ1
LMR16006YQ5DDCRQ1 by Texas Instruments is a small outline switching regulator with a max output voltage of 36V and a max output current of 0.6A, suitable for automotive applications. Operating b/w -40 to 125°C, it uses pulse width modulation control mode and has a buck switcher configuration with a max switching frequency of 2100kHz.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR16030PDDA
LMR16030PDDA by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include pulse width modulation control technique and buck switcher configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved