Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMR14010ADDCR by Texas Instruments is a small outline, thin profile switching regulator with 6 terminals. It operates b/w -40 to 125°C, supporting input voltages from 4-40V and output currents up to 1A. Ideal for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a max frequency of 700kHz.
Median Price
$0.834
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.666
100+ parts
$0.508
1k+ parts
$0.477
10k+ parts
-
Arrow
$0.801
$0.539
Mouser Electronics
$1.730
$1.030
$0.924
DigiKey
Verical
$0.897
$0.783
Digiode
$0.647
Nova Conductors
$0.668
Maritex
$1.198
$0.677
$0.572
Chip Stock
Vyrian
Sensible Micro Corp
Bristol Electronics
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Semicontronic
$0.458
$0.447
$0.444
Ampacity Inc.
Continental Prestige Electronics
$0.605
$0.593
Argo Parts USA
$0.587
Corphita
$0.613
Modulus Dynamics
$0.741
$0.734
$0.712
Corohmni
$9.885
Advanced Electronics
$16.197
$15.387
Parana Technologies
$21.311
$21.629
DigiPath Technology Company
$23.466
$21.589
ChromeModa Solutions
$23.945
$19.635
IDEA Electronic Components Group
$22.748
$21.550
Kepictronics
A-Z Elektronik GmbH
Technoshack Inc. (Excess)
S.R.D Solutions
Robosynatics
Lucentia Tech
$11.685
$11.446
Lixinc
Authorized Procurement Solutions
Futuretech Components
Benley Electronics
Netroflash
$0.655
$0.635
$0.621
Alle Elektronik GmbH
Speed Components Ltd (Excess)
Perfect Parts
The use of plastic/epoxy material makes this product lightweight and durable, ideal for portable electronic devices.
With surface mount capability, this product is easy to install and saves space on the PCB, making it suitable for compact designs.
The rectangular shape of the package allows for easy placement on the PCB, optimizing board space and enhancing overall circuit layout.
The six terminals provide flexibility in connection options, allowing for versatile circuit configurations to meet specific design requirements.
The small outline and thin profile package style make this product suitable for applications with limited space, such as handheld devices or IoT gadgets.
With a high maximum operating temperature, this product can withstand harsh environmental conditions, making it reliable for industrial and automotive applications.
The low minimum output voltage enables precise regulation of power, making this product suitable for sensitive electronic components requiring low voltage operation.
The current-mode control technique ensures stable and efficient operation, providing precise regulation of output current for consistent performance.
The low minimum operating temperature allows this product to function reliably in extreme cold environments, making it suitable for outdoor or automotive applications.
The nickel palladium gold terminal finish provides excellent corrosion resistance and ensures reliable electrical connections, increasing the lifespan of the product.
The high maximum output voltage capability makes this product versatile for various voltage requirements in different electronic systems.
The dual terminal position allows for easy connection and flexibility in circuit design, catering to a wide range of applications.
The low maximum seated height makes this product ideal for applications with height constraints, ensuring a compact and space-efficient design.
With a slim width of 1.6 mm, this product is suitable for compact designs where space optimization is crucial.
Being a switching regulator, this product offers high efficiency and precise voltage regulation, making it a reliable choice for power management in various electronic devices.
The 12V nominal input voltage range makes this product versatile for a wide range of applications, providing compatibility with common power sources.
The short time at peak reflow temperature ensures the reliability of solder joints during assembly, leading to a robust and long-lasting product.
The high peak reflow temperature capability allows for reliable soldering during the manufacturing process, ensuring strong mechanical connections for the product.
The compact length of 2.9 mm contributes to the overall small form factor of this product, making it suitable for space-constrained applications.
Designed to meet automotive standards, this product is built to withstand harsh operating conditions in vehicle environments, ensuring durability and reliability.
The high maximum switching frequency enables fast response times and efficient power conversion, making this product suitable for high-performance applications.
With a maximum output current of 1A, this product can deliver sufficient power to drive a variety of electronic components, making it versatile for different applications.
The gull-wing terminal form allows for easy PCB mounting and secure soldering, ensuring a reliable electrical connection for the product.
The pulse width modulation control technique provides precise regulation of output voltage, ensuring stable and efficient power delivery for the product.
With a buck switcher configuration, this product offers high efficiency in stepping down voltage levels, making it suitable for battery-powered devices or energy-efficient applications.
The narrow terminal pitch of 0.95 mm allows for dense packing on the PCB, contributing to a space-efficient design for the product.
The low minimum input voltage requirement of 4V enables operation in low-power scenarios, making this product suitable for battery-powered or energy harvesting applications.
With a high maximum input voltage of 40V, this product is robust and versatile for various power supply scenarios, providing flexibility in system design.
Switching Regulators & Controllers LMR14010ADDCR attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LMR14010ADDCR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Alt Assembly Site 05/Apr/2021
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Tak Cheong Electronics Holdings
LM5002MAX/NOPB
LM5002MAX/NOPB by Texas Instruments is a current-mode switching regulator with a max output voltage of 75V and max output current of 0.6A. It operates in pulse width modulation control mode, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
LMZ12003TZ-ADJ/NOPB
LMZ12003TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 3A output current, 1.8V nominal output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and small outline package style.
LTC3779EFE#PBF
Analog Devices
LTC3779EFE#PBF by Analog Devices is a current-mode switching controller with a buck-boost switcher config. It operates b/w 0 to 85 °C and supports input voltage range of 4.5V to 150V. Ideal for applications requiring pulse width modulation control technique in compact designs.
LM2575T-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 3.2 A;
LMZ21700SILR
LMZ21700SILR by Texas Instruments is a switching regulator with a max output current of 0.65A and a max switching frequency of 2.5MHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LMZ14203TZX-ADJ/NOPB
LMZ14203TZX-ADJ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design.
LM2574N-5G
Onsemi
LM2574N-5G by Onsemi is a voltage-mode switching regulator with 1.8A output current, operating b/w -40 to 125°C. Ideal for automotive applications, it supports input voltages from 7V to 40V and offers a max switching frequency of 63kHz in a compact rectangular package.
LM25011MYX/NOPB
LM25011MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and dual terminal position, it offers high efficiency at up to 2000 kHz switching frequency.
TPS62903RPJR
TPS62903RPJR by Texas Instruments is a switching regulator with 3A output current, 1.2V nominal output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact chip carrier package style. Suitable for various power management needs in automotive electronics systems.
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
LMZM23600V3SILT
LMZM23600V3SILT by Texas Instruments is a switching regulator with a current-mode control technique, suitable for automotive applications. It offers a max output current of 0.5A, operating temperature range from -40 to 125°C, and supports buck-boost switcher configuration. With a nominal input voltage of 24V and nominal output voltage of 3.3V, it is ideal for compact microelectronic assemblies requiring efficient power management.
TPS63000DRCR
TPS63000DRCR by Texas Instruments is a switching regulator with max output voltage of 5.5V, max output current of 2A, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
TPS62933DRLR
TPS62933DRLR by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 2200 kHz. It operates in buck configuration, suitable for applications requiring efficient power conversion at input voltages ranging from 3.8V to 30V. The IC's compact design with small outline and thin profile makes it ideal for space-constrained environments.
PLMZM23601SILR
SWITCHING REGULATOR;
LM3478MM/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMR16030PDDAR
LMR16030PDDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C. This compact device offers pulse width modulation control technique and operates at a max switching frequency of 2500 kHz.
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
MC33063ADR
MC33063ADR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient power conversion in a compact SMALL OUTLINE package.
LM51561DSSR
LM51561DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in current-mode control technique, it has a max switching frequency of 500 kHz. Ideal for automotive applications due to its -40 to 125 °C temperature grade range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
LMR16006XDDCR
LMR16006XDDCR by Texas Instruments is a switching regulator with 6 terminals, operating from -40 to 125°C. It offers a max output voltage of 55V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique.
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
LMR16006YDDCT
LMR16006YDDCT by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and wide operating temperature range (-40°C to 125°C).
LMR14203XMKE/NOPB
LMR14203XMKE/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control mode, and can handle up to 0.3A output current. Ideal for automotive applications due to its compact size and wide input voltage range of 4.5-42V.
LMR14206XMKE/NOPB
LMR14206XMKE/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.6A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LMR14206XMKX/NOPB
LMR14206XMKX/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control mode, and can handle up to 0.6A output current. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 1500kHz.
LMR14203XMKX/NOPB
LMR14203XMKX/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, operating temp range -40 to 125°C, and max output current of 0.3A. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
LMR16030SDDAR
LMR16030SDDAR by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 125°C, and input voltage range from 4.3V to 60V. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of 2500kHz.
LMR16006YDDCR
LMR16006YDDCR by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range from 4V to 60V.
LMR14206XMK/NOPB
LMR14206XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.765V to 34V. It is designed for automotive applications, featuring a compact rectangular package with very thin profile suitable for surface mount assembly. The control mode is current-mode PWM with max output current of 0.6A and switching frequency up to 1500kHz.
LMR14203XMK/NOPB
LMR14203XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.3A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LMR16006YQDDCRQ1
LMR16006YQDDCRQ1 by Texas Instruments is a small outline switching regulator with 6 terminals. It operates b/w -40 to 125 °C and supports input voltage from 4-40 V, output voltage from 0.8-36 V, and current up to 0.6 A. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LMR14050SDDA
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR14050SDDAR
LMR14030SDDA
LMR14030SDDA by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 36V and current of 3.5A, suitable for automotive applications due to its low profile design and pulse width modulation control technique. With a compact size of 4.9mm x 3.9mm x 1.7mm, it is ideal for space-constrained environments requiring efficient power management up to 2500kHz switching frequency.
LMR16006YQ5DDCRQ1
LMR16006YQ5DDCRQ1 by Texas Instruments is a small outline switching regulator with a max output voltage of 36V and a max output current of 0.6A, suitable for automotive applications. Operating b/w -40 to 125°C, it uses pulse width modulation control mode and has a buck switcher configuration with a max switching frequency of 2100kHz.
LMR14006YDDCR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR16030PDDA
LMR16030PDDA by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include pulse width modulation control technique and buck switcher configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved