Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM95071QIMF/NOPB by Texas Instruments is a temperature sensor with 14-bit resolution, operating from -40 to 150°C. It features a 3-wire interface, digital output, and low power consumption of 0.28mA at max voltage. Ideal for automotive applications due to AEC-Q100 screening and compact rectangular package design.
Median Price
$1.548
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$1.440
10k+ parts
Rochester
$1.460
$1.310
$1.230
Verical
$1.637
$1.538
Arrow
$1.726
$1.542
Digiode
$1.311
Nova Conductors
$1.470
Vyrian
Ampacity Inc.
$1.170
Semicontronic
$1.141
$1.135
Corphita
$1.242
Continental Prestige Electronics
$1.429
$1.400
Argo Parts USA
Corohmni
$2.318
Parana Technologies
$2.853
$3.343
DigiPath Technology Company
$3.142
$2.891
ChromeModa Solutions
$3.206
$2.629
IDEA Electronic Components Group
$2.885
This material offers durability and can withstand various environmental conditions, making it a reliable choice for temperature sensing applications.
With a high maximum supply voltage, this sensor can be used in a wide range of systems without risk of damage, providing flexibility in design.
This certification ensures that the sensor meets stringent automotive industry standards for quality and reliability, making it suitable for automotive applications.
With 14 bits of resolution, this sensor can provide highly accurate temperature measurements, making it ideal for precise temperature control systems.
The compact size of the sensor allows for easy integration into tight spaces, making it suitable for applications where space is limited.
Operating at a standard power supply voltage of 3.3V, this sensor can easily be integrated into existing systems without the need for additional components.
This sensor offers multiple output options, providing versatility in its use across different types of systems.
With 5 terminals for connection, this sensor offers a secure and stable connection in the system, ensuring accurate temperature readings.
The low profile design of this sensor allows for easy mounting and integration into various applications, making it a versatile choice.
The rectangular shape of the package offers a standardized form factor, making it easy to replace or upgrade existing sensors in systems.
With a low minimum supply voltage, this sensor can operate efficiently even in low-power applications, making it energy-efficient.
With a high maximum operating temperature, this sensor can withstand high heat environments, making it suitable for industrial applications.
The low minimum output voltage ensures accurate temperature readings even at lower temperature ranges, ensuring precision in measurement.
The wide operating temperature range allows the sensor to function effectively in extreme temperatures, making it suitable for harsh environments.
The matte tin finish on the terminals provides corrosion resistance and ensures a reliable electrical connection, increasing the sensor's longevity.
The high maximum output voltage ensures that the sensor can provide a wide range of temperature readings with high precision, making it a versatile choice.
With a low operating current, this sensor consumes minimal power, making it suitable for battery-powered applications or energy-conscious designs.
The plastic housing offers durability and protection for the sensor components, making it suitable for use in various environments.
With a maximum accuracy of 2°C, this sensor can provide precise temperature measurements, ensuring reliable performance in critical applications.
The compact size of the sensor makes it easy to install in tight spaces, allowing for versatile use in a wide range of applications.
Using solder termination ensures a strong and secure connection, preventing signal interruptions and enhancing the sensor's reliability.
The 3-wire interface simplifies the sensor's integration into systems, providing easy communication and data transfer between the sensor and external devices.
The surface mount design allows for easy installation on PCBs, providing a secure attachment and space-saving solution for system integration.
Temperature Sensors LM95071QIMF/NOPB attributes and parameters. Explore more Temperature Sensors devices from Texas Instruments
Maximum Accuracy (Cel):
Body Width:
Body Height:
Body Length/Diameter:
Housing:
JESD-609 Code:
Mounting Feature:
No. of Bits:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Screening Level:
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
LM95071QIMF/NOPB Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 09/Nov/2023
PCN Packaging - Pin One Dot 07/Jan/2019
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Leshan Radio
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
P1K0.232.6W.A.010
Innovative Sensor Technology Ist Ag
TEMPERATURE SENSOR,RTD,PLATINUM;
DS1631S/T&R
Maxim Integrated
DS1631S/T&R by Maxim Integrated is a 12-bit temperature sensor with 2-wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Ideal for applications requiring digital output and surface mounting features.
TMP411ADGKRG4
TMP411ADGKRG4 by Texas Instruments is a 12-bit temperature sensor with a max supply voltage of 5.5V and accuracy of 2.5 °C. It features a 2-wire interface, digital output, and operates in temperatures ranging from -55 to 127 °C. Ideal for applications requiring precise temperature monitoring in compact spaces.
LM35DM/NOPB
LM35DM/NOPB by Texas Instruments is a temperature sensor with voltage output, operating b/w 0-100°C. It has 8 terminals, requires 4-30V power supply, and offers linearity of 0.20°C. Ideal for applications requiring precise temperature monitoring in a compact surface-mount package.
TMP100AQDBVRQ1
TMP100AQDBVRQ1 by Texas Instruments is a 12-bit temperature sensor with 2.7-5.5V supply voltage range, AEC-Q100 screening level, and ±2°C accuracy. Ideal for automotive applications due to its small size (1.45mm height) and wide operating temperature range (-40 to 125°C). Features include digital output, 2-wire interface, and surface mounting feature.
NB-PTCO-032
TE Connectivity
TE Connectivity's NB-PTCO-032 is a 1.2" wide RTD temperature sensor with 0.3 °C accuracy, operating from -50 to 600 °C. Its platinum housing and 100 ohm resistance make it ideal for precise temperature measurements in various industrial applications.
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM56BIMX/NOPB
LM56BIMX/NOPB by Texas Instruments is a temperature sensor with dual trip points, operating from -40 to 125°C. It has a supply voltage range of 2.7-10V and offers high accuracy of 3°C. This rectangular-shaped sensor is ideal for applications requiring precise temperature monitoring in various electronic devices.
DS1624S/T&R
DS1624S/T&R by Maxim Integrated is a 13-bit temperature sensor with 2-wire interface. Operating range from -55 to 125°C, it has a supply voltage of 2.7-5.5V and max current of 1mA. Ideal for applications requiring precise digital temperature monitoring in compact spaces.
LM26CIM5-VHA/NOPB
National Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SINGLE TRIP POINT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Operating Current: .04 mA;
LM20BIM7X/NOPB
LM20BIM7X/NOPB by Texas Instruments is a temperature sensor with voltage output. It operates b/w -55 to 130°C, with accuracy of ±2.5°C. Suitable for surface mount applications, it has a supply voltage range of 2.4-5.5V and low operating current of 0.007mA.
TCN75-3.3MOA713
TCN75-3.3MOA713 by Microchip Technology is a temperature sensor with a max operating temperature of 125°C and an accuracy of 3°C. It has a 2-wire interface and is suitable for surface mount applications.
DS1631Z+
Analog Devices
Analog Devices' DS1631Z+ is a 12-bit temperature sensor with a max supply voltage of 5.5V and accuracy of 0.50°C. It features a 2-wire interface, digital output, and operates b/w -55 to 125°C. Ideal for applications requiring precise temperature monitoring in compact spaces with surface mounting feature.
LM75CIM-5
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 5.5 V; Body Width: 3.9 inch;
NCT75DMR2G
Onsemi
NCT75DMR2G by Onsemi is a 12-bit temperature sensor with a supply voltage range of 3V to 5.5V and an operating temperature range from -55°C to 125°C. It features a max accuracy of 3°C, positive temperature coefficient, and a 2-wire interface output. Ideal for applications requiring precise temperature monitoring in compact spaces with surface mounting feature.
AD7415ARTZ-1500RL7
AD7415ARTZ-1500RL7 by Analog Devices is a 10-bit temperature sensor with 2-wire interface. Operating range from -40 to 125°C, it has a max accuracy of ±3°C. Ideal for applications requiring precise temperature monitoring in compact spaces.
TMP05ARTZ-500RL7
TMP05ARTZ-500RL7 by Analog Devices is a 12-bit temperature sensor with 3.3/5V power supply, operating from -40 to 150°C. It features a 1-Wire interface, hybrid technology, and ±2°C accuracy. Ideal for applications requiring precise temperature monitoring in compact designs.
KTY81/222,112
NXP Semiconductors
NXP Semiconductors' KTY81/222,112 is a temperature sensor with 2 terminals and resistance-based analog output. It operates b/w -55°C to 150°C with positive temperature coefficient. The cylindrical sensor in plastic housing has nominal R0 of 1646 ohm, ideal for through-hole mounting applications.
TMP01FSZ
TMP01FSZ by Analog Devices is a temperature sensor with voltage output. It operates b/w -40 to 85 °C, with accuracy of 5 °C. The sensor has 8 terminals and requires power supplies of 4.5-13.2 V, making it suitable for various applications in temperature monitoring systems.
TMP125AIDBVT
TMP125AIDBVT by Texas Instruments is a 12-bit temperature sensor with SPI interface. It operates b/w -55 to 125°C, offering ±2°C accuracy. Ideal for applications requiring digital output and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LM95071CIMFX/NOPB
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; No. of Bits: 14; Package Equivalence Code: TSOP5/6,.11,37;
LM95071CIMFX/NOPB by Texas Instruments is a 14-bit temperature sensor with 3.3V power supply, operating from -40 to 150°C. It features a 3-wire interface and digital output, suitable for surface mount applications in various industries.
LM95234CISD/NOPB
LM95234CISD/NOPB by Texas Instruments is a temperature sensor with 11-bit resolution, operating from -40 to 140°C. It features a 2-wire interface, digital output, and operates on a supply voltage range of 3-3.6V. Ideal for applications requiring precise temperature monitoring in compact designs using surface mount technology.
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Maximum Operating Current: .5 mA; Minimum Operating Temperature: -40 Cel;
LM95234CISDX/NOPB
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Body Length/Diameter: 4 mm;
LM95234CISDX/NOPB by Texas Instruments is a temperature sensor with 11-bit resolution and ±2°C accuracy. It operates b/w -40°C to 140°C, suitable for various applications requiring precise temperature monitoring. With a 3.3V power supply and 14 terminals, it offers a digital output interface via a 2-wire serial connection in a compact square package ideal for surface mount installations.
LM95071CIMF/NOPB
LM95071CIMF/NOPB by Texas Instruments is a 14-bit temperature sensor with a supply voltage range of 2.4V to 5.5V, offering high accuracy within ±2°C. It features a digital output interface and operates b/w -40°C to 150°C, making it ideal for applications requiring precise temperature monitoring in various environments.
LM95071CIMF
LM95071CIMF by Texas Instruments is a 14-bit temperature sensor with a supply voltage range of 2.4V to 5.5V and accuracy of ±2°C. It features a digital output interface, operates from -40°C to 150°C, and is ideal for applications requiring precise temperature monitoring in compact electronic devices.
LM95233CISDX/NOPB
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Termination Type: SOLDER; No. of Bits: 11;
LM95233CISD/NOPB
LM95233CISD/NOPB by Texas Instruments is a temperature sensor with 11-bit resolution, operating from -40 to 140°C. It features a 2-wire interface, digital output, and requires a supply voltage of 3-3.6V. Ideal for applications requiring precise temperature monitoring in compact spaces.
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Body Height: .8 mm; No. of Bits: 11;
LM95071QIMFX/NOPB
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Supply Voltage: 5.5 V;
LM95233CISD
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Body Length/Diameter: 4 mm; Maximum Supply Voltage: 3.6 V;
LM95233CISD by Texas Instruments is a temperature sensor with 11-bit resolution, operating from -40 to 125°C. It features a 2-wire interface, digital output, and requires a supply voltage of 3-3.6V. Ideal for applications requiring precise temperature monitoring in compact spaces.
LM95233CISDX
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Body Height: .8 mm; Power Supplies (V): 3.3;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Minimum Supply Voltage: 3 V; Maximum Accuracy (Cel): 2;
LM95214CISDX/NOPB
LM95234CISDX
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Terminal Finish: Tin/Lead (Sn/Pb);
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: SQUARE; Power Supplies (V): 3.3; Body Height: .8 mm;
LM95071CIMFX
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Power Supplies (V): 3.3; Maximum Supply Voltage: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved