Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM53603AMPWPT by Texas Instruments is a switching regulator with 3A output current, 3.2V min output voltage, and 9.9V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and pulse width modulation control technique.
Median Price
$6.780
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$4.083
100+ parts
$3.329
1k+ parts
$2.219
10k+ parts
-
Mouser Electronics
$4.390
$3.930
DigiKey
$6.840
$4.436
Digiode
$3.879
Nova Conductors
$3.905
Vyrian
Chip Stock
Parana Technologies
$3.110
$3.630
DigiPath Technology Company
$3.424
$3.150
Semicontronic
$3.470
$3.383
$3.366
Ampacity Inc.
ChromeModa Solutions
$3.494
$2.865
IDEA Electronic Components Group
$3.145
Corphita
$3.675
Argo Parts USA
Continental Prestige Electronics
$3.826
Netroflash
Advanced Electronics
$13.583
$12.903
Corohmni
$22.522
Lixinc
Perfect Parts
Futuretech Components
Provides durability and protection for the internal components, ensuring a long lifespan.
Allows for easy installation on circuit boards, saving space and simplifying assembly processes.
Suitable for high-temperature environments, making it ideal for automotive applications and other demanding conditions.
Offers a low minimum output voltage, making it suitable for a wide range of electronic devices.
Provides efficient and stable control of the output current, enhancing overall performance and reliability.
High switching frequency allows for faster response times and improved efficiency in regulating voltage.
Capable of delivering a high output current, making it suitable for powering a variety of devices.
Switching Regulators & Controllers LM53603AMPWPT attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM53603AMPWPT Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Design 22/Feb/2022
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Vishay Intertechnology
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Micronetics
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
LMZ31707RVQR
LMZ31707RVQR by Texas Instruments is a switching regulator with a max output current of 7A and a max input voltage of 17V. It operates in a temperature range of -40 to 85°C and is commonly used in industrial applications.
MP9486AGN-Z
Monolithic Power Systems
MP9486AGN-Z by Monolithic Power Systems is a voltage-mode switching regulator with a 60V nominal input and output voltage, operating b/w -40 to 125°C. This small outline IC has a max switching frequency of 1MHz, making it suitable for automotive applications requiring efficient buck converter control.
LMR23630ADDAR
LMR23630ADDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max input voltage of 36V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TPS54821RHLR
TPS54821RHLR by Texas Instruments is a switching regulator with 8A output current, 1600kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications due to its -40 to 125°C temp range, BUCK switcher config, and 12V nominal input voltage.
LMZ23603TZE/NOPB
LMZ23603TZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 950kHz max switching frequency, and 6V max output voltage. Ideal for industrial applications requiring a compact design and efficient power management in temperature-sensitive environments.
LM2672M-ADJ
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM51561DSSR
LM51561DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in current-mode control technique, it has a max switching frequency of 500 kHz. Ideal for automotive applications due to its -40 to 125 °C temperature grade range.
LM2576HVT-ADJLF03
LM2576HVT-ADJLF03 by National Semiconductor is a VOLTAGE-MODE switching regulator with 5 terminals, capable of 3A output current at a max frequency of 63kHz. Its PLASTIC/EPOXY body and IN-LINE style make it suitable for power supply applications requiring efficient voltage regulation.
MC34063ADG
MC34063ADG by Onsemi is a switching regulator with 8 terminals, operating b/w 0-70°C. It has a max output current of 1.5A and supports voltage-mode control technique at a frequency of up to 100 kHz. Ideal for applications requiring efficient power conversion in compact spaces.
UCC28C45DGKRG4
UCC28C45DGKRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 105°C) and is suitable for applications requiring precise pulse width modulation control, such as power supplies and converters.
LM43602PWPR
LM43602PWPR by Texas Instruments is a switching regulator with 2A output current, 3.3V nominal output voltage, and 2200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
LM2678S-3.3/NOPB
LM2678S-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 5A, operating temp range of -40 to 125°C, and control mode as voltage-mode. It is ideal for automotive applications due to its compact size, PWM control technique, and wide input voltage range from 8V to 40V.
LM2675M-12/NOPB
LM2675M-12/NOPB by Texas Instruments is a switching regulator with a max output current of 1A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2733XMF/NOPB
LM2733XMF/NOPB by Texas Instruments is a switching regulator with a max output current of 1.5A and max output voltage of 40V, ideal for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style suitable for space-constrained designs.
TPS62170DSGT
TPS62170DSGT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.5A. Operating in hysteric current mode, it has a max switching frequency of 2250 kHz and is ideal for industrial applications requiring efficient power management in compact spaces.
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
UCC28C43DRG4
UCC28C43DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
LM2576HVS-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LNK304PN
Power Integrations
LNK304PN by Power Integrations is a switching regulator IC with 8 terminals and a max output current of 0.4A. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a max switching frequency of 70kHz, this IC uses pulse width modulation control technique in a buck switcher configuration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM536013QDSXTQ1
LM536013QDSXTQ1 by Texas Instruments is a switching regulator with a max output current of 1A and max operating temp of 150°C. Ideal for automotive applications, it offers a control mode of current-mode and operates at a max switching frequency of 2400kHz. With a package style of small outline and very thin profile, it's suitable for compact designs.
LM536035QPWPRQ1
LM536035QPWPRQ1 by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 2350kHz. It operates in automotive-grade temperatures, making it suitable for automotive applications. With a compact package style and surface-mount capability, it offers efficient power management solutions for various electronic devices.
LM536035QPWPTQ1
LM536035QPWPTQ1 by Texas Instruments is a switching regulator with 3A output current, 3.2V min output voltage, and 9.9V max output voltage. Ideal for automotive applications due to its -40°C to 150°C operating temperature range and pulse width modulation control technique. This compact IC offers a wide input voltage range of 3.5V to 42V and operates at a max frequency of 2350kHz.
LM53603AQPWPRQ1
LM53603AQPWPRQ1 by Texas Instruments is a switching regulator with 3A output current, 3.2V min output voltage, and 9.9V max output voltage. Ideal for automotive applications due to its -40 to 150°C operating temperature range and pulse width modulation control technique.
LM53601LQDSXTQ1
LM53601LQDSXTQ1 by Texas Instruments is a switching regulator with a max output current of 1A and a max input voltage of 42V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM53602AMPWPR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM53603AMPWPR
LM53603AMPWPR by Texas Instruments is a switching regulator with a max output current of 3A and a max input voltage of 42V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM536025QPWPTQ1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM536033QPWPTQ1
LM53602AMPWPT
LM536013QDSXRQ1
LM536013QDSXRQ1 by Texas Instruments is a switching regulator with a 3.2V min output voltage and 6V max output voltage, suitable for automotive applications. It operates at temperatures ranging from -40°C to 150°C, with a max output current of 1A and a control mode of current-mode PWM. The package style is small outline, heat sink/slug, very thin profile, making it ideal for space-constrained designs.
LM53601NQDSXTQ1
LM53601NQDSXTQ1 by Texas Instruments is a switching regulator with a max output current of 1A and max operating temp of 150°C. Ideal for automotive applications, it operates in buck mode with a control technique of PWM, offering an output voltage range from 3.2V to 6V.
LM53625MQRNLRQ1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 22; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM536033QPWPRQ1
LM536015QDSXTQ1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
LM53603AQPWPTQ1
LM536253QRNLRQ1
LM536253QRNLRQ1 by Texas Instruments is a switching regulator with 22 terminals, operating temperature range of -40 to 150°C, and output current up to 2.5A. Ideal for automotive applications, it features a control mode of current-mode, pulse width modulation technique, and buck switcher configuration.
LM53602AQPWPRQ1
LM53602AQPWPRQ1 by Texas Instruments is a switching regulator with max output current of 2A, operating temp range -40 to 150°C, and max input voltage of 42V. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
LM53625LQRNLRQ1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved