Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM337K by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
Median Price
$33.440
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$15.050
1k+ parts
-
10k+ parts
Ace Electronics
$7.500
American Microsemiconductor Inc.
$7.890
TEDSS.com
$10.000
Forefront Electronics and Design
$17.150
Freelance Electronics
$19.327
$20.293
$19.133
Digiode
$31.768
Anansix
Vyrian
Infinite Electronics LLP
Electronic Expediters
M&R Communications
ECAB
SPM Sales
Bristol Electronics
Zilex Electronics Inc.
Sogenti Electronics
LWI Electronics Inc
LittleDiode
Prism Electronics
Corel Iberica Componentes, S.L.
Electronics Depot
Fibra_Brandt Electronic GMBH
R&J Components
Semtec, LLC
Rebound Electronics
Inland Empire Components Inc.
First Choice Components Inc.
Resion
ACDS - Activité Composants Distribution Service
Sunrise Surplus Inc.
Extreme Components
Holdelec - ElecDif-Pro
Pride Electronics
GES GmbH
ComSIT Distribution GmbH
QIE Inc.
Digital Electronic Gebert Verwaltungs UG
Cyclops Electronics Ltd
IDEA Electronic Components Group
$4.285
$3.857
ChromeModa Solutions
$5.752
$4.717
MARBEL Systems
$6.977
Corohmni
Texas Native Microelectronics
$8.019
$7.698
$7.458
$7.057
DigiPath Technology Company
$8.058
MKK Technologies
Kenton Components
$9.623
$8.468
Microchip USA
$14.220
Qasali Group International
$21.651
$20.136
$19.053
One Stop Electronics
$28.420
Corphita
$30.096
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Parana Technologies
$5.124
Perfect Parts
Kepictronics
Metaverse IC Inc.
Assy Fe
A-Plus Industry Inc.
Eliminating Global Boundries, Inc
Authorized Procurement Solutions
GreenTree Electronics
The metal package body provides durability and heat dissipation, making the regulator suitable for a wide range of operating temperatures.
The high maximum operating temperature allows the regulator to function reliably in elevated temperature environments.
The high maximum voltage differential capability makes this regulator suitable for applications requiring a wide range of input voltages.
The bipolar technology ensures stable performance and accurate regulation of output voltage.
The adjustable feature allows for customization of the output voltage, making it versatile for various applications.
The high maximum output current rating enables the regulator to power demanding loads without overheating or voltage drop.
Adjustable Regulators - Negative Single Output Standard LM337K attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Texas Instruments
Adjustability:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Regulator Type:
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
LM337K Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-128-1851, 5962011281851, 5962-01-115-6140, 5962011156140
NIIN
011281851, 011156140
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Dc Components
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM358N
Kec
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
ICL7664ACTV-T
Maxim Integrated
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: TO-99; Terminal Form: WIRE; No. of Functions: 1; Technology: CMOS;
LM137HVKMW8
LM137HVKMW8 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 47V and max output current of 1.5A. Operating temperature ranges from -55°C to 150°C, making it suitable for industrial applications requiring precise voltage regulation in harsh environments. This surface-mount device features bipolar technology and is ideal for compact designs where space is limited.
JL137SXA
The Texas Instruments JL137SXA is an adjustable negative single output standard regulator with a max output voltage of -37V and max output current of 1.5A. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation. The package body material is metal, ensuring durability and reliability in harsh environments.
LT337AT#PBF
Analog Devices
Analog Devices' LT337AT#PBF is a bipolar adjustable negative single output standard regulator with 3 terminals. It offers a max output voltage of 37V and can handle up to 1.5A output current. Ideal for applications requiring precise voltage regulation in environments with temperatures ranging from 0°C to 125°C.
LM337H
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; No. of Outputs: 1; Maximum Output Current-1: 1.5 A; Adjustability: ADJUSTABLE;
LT1033CT#PBF
LT1033CT#PBF by Analog Devices is an adjustable negative single output standard regulator with a max output current of 3A and max load regulation of 1.5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring precise voltage regulation.
LM337IMP
LM337IMP by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM137H/NOPB
LM137H/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. With a package body material made of metal and a bipolar technology, this regulator offers high performance and reliability in compact cylindrical packaging.
RH137KDICE
Analog Devices' RH137KDICE is an adjustable negative single output standard regulator with a max input-output voltage differential of 30V. Operating temperature ranges from -55 °C to 150°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. This surface-mount device features a rectangular package shape and three terminals, ideal for compact designs.
LM337BD2T
Onsemi
LM337BD2T by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM337T
LM337T by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
LM237KCSE3
LM237KCSE3 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from -25°C to 150°C, making it suitable for various applications requiring precise voltage regulation in a compact package. With a technology of bipolar and terminal pitch of 2.54mm, this regulator is ideal for designs where space and efficiency are critical factors.
LM337KTPR
LM337KTPR by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
LM137HMDA
LM137HMDA by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from -55°C to 150°C, making it suitable for industrial applications requiring precise voltage regulation in harsh environments. Its metal package body material and bipolar technology ensure reliable performance in demanding conditions.
7703404
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR;
LM337T/NOPB
LM337T/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers. With a package style of flange mount and terminal finish of matte tin (Sn), this bipolar technology regulator offers reliable performance in a compact form factor.
5962P9951708VXA
Texas Instruments' 5962P9951708VXA is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. Operating temperature ranges from -55 to 150°C, making it suitable for high-reliability applications in harsh environments such as aerospace and defense systems.
JL137SYA
The Texas Instruments JL137SYA is an adjustable negative single output standard regulator with a max output current of 1.5 A and a min input voltage of 40 V. It features a package body material made of metal, operates in temperatures ranging from -55 to 150 °C, and has a regulator type of ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR. Ideal for applications requiring precise voltage regulation in electronic circuits.
M3851011803SXX
M3851011803SXX by Analog Devices is an adjustable negative single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from -55 °C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation in harsh environments. The package body material is metal, ensuring durability and reliability in demanding conditions.
ICL7664ACSA-T
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Surface Mount: YES; Terminal Position: DUAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LM337IMPX/NOPB
LM337IMPX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. The package style is small outline (SO) with gull wing terminals for surface mount assembly.
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Maximum Output Voltage-1: 37 V;
Motorola
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Surface Mount: NO;
Tt Electronics Plc
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; No. of Outputs: 1;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; JESD-609 Code: e3; Package Shape: RECTANGULAR;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Output Voltage-1: 37 V;
LM337D2TR4G
LM337D2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM337IMP/NOPB
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Technology: BIPOLAR; Terminal Position: DUAL;
LM337IMP/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, with surface mount capability for easy integration into electronic devices.
LM337TG
LM337TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and current of 1.5A. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a min input-output voltage differential of 3V, this bipolar technology-based regulator offers reliable performance in diverse projects.
LM337IMPX
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOT-223; Qualification Status: Not Qualified;
LM337IMPX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 40 V; Maximum Load Regulation (%): 1.5 %;
LM337BD2TR4G
LM337BD2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output current of 1.5 A and a max output voltage of 37 V. It operates in temperatures ranging from -40 to 125 °C and has a min input-output voltage differential of 3 V, making it suitable for various applications requiring precise voltage regulation.
LM337LM/NOPB
LM337LM/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a max output current of 0.1A and small outline package style, it is ideal for use in electronic devices where space and power efficiency are crucial.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e3; Adjustability: ADJUSTABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved