Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LF398AN by Texas Instruments is a Sample & Hold IC with 8 terminals and a rectangular package shape. It operates on +-15V power supplies, has a max acquisition time of 25us, and uses bipolar technology. Ideal for sample and hold circuits in commercial applications due to its fast acquisition time and dual terminal position.
Median Price
$1.300
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$1.220
1k+ parts
$1.110
10k+ parts
-
Digiode
$1.235
Component Electronics Inc.
$3.080
$2.310
$2.000
Anansix
Vyrian
Corel Iberica Componentes, S.L.
Bristol Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Semi Source
DF Sales Co.
GES GmbH
Connector Distribution Corp
Right Parts Inc.
Sensible Micro Corp
ECAB
Sinequanon
Electronics Depot
Atlantic Semiconductor
R&J Components
ComSIT Distribution GmbH
Nova Conductors
MISTER SPROCKETS
Prism Electronics
Resion
LittleDiode
Ampacity Inc.
$1.100
Corphita
$1.170
Semicontronic
$2.410
$2.350
$2.338
Parana Technologies
$5.864
$6.648
DigiPath Technology Company
$6.457
$5.941
ChromeModa Solutions
$6.589
$5.403
IDEA Electronic Components Group
$5.930
AZTECH Wire
$10.946
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Continental Prestige Electronics
Alle Elektronik GmbH
Metaverse IC Inc.
Bastille Electronics
Kepictronics
Infinite Electronics LLP (Excess)
Assy Fe
Microchip USA
Futuretech Components
Epart123
Computer Components Inc. - USA
ChipstoGo Electronic ltd
Speed Components Ltd (Excess)
Perfect Parts
This material provides durability and protection for the internal components of the IC, ensuring a longer product lifespan.
Can operate efficiently in a wide range of temperatures, making it suitable for various environments and applications.
Allows for quick and accurate sampling and holding of analog signals, ensuring reliable performance.
Utilizes bipolar technology for precise signal processing and low noise levels, resulting in high-quality output.
Specifically designed for sample and hold operations, making it a specialized and efficient choice for such applications.
Sample & Hold ICs LF398AN attributes and parameters. Explore more Sample & Hold ICs devices from Texas Instruments
Amplifier Type:
Technology:
Power Supply Voltage Ratings:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Maximum Acquisition Time:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style (Meter):
Package Equivalence Code:
LF398AN Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
NSN
5962-01-369-9215, 5962013699215
NIIN
013699215
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
1N4148WS
Hitano Enterprise
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Jiangsu Changjiang Electronics Technology
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
HTC-0300MB
Analog Devices
Analog Devices' HTC-0300MB is a Sample & Hold IC with MIL-STD-883 Class B screening. It operates at -55 to 100 °C, with power supplies of ±15V and 5V. Ideal for applications requiring fast 0.2us acquisition time, it features a hybrid technology and through-hole terminals in an in-line package style.
LF398S8#TRPBF
LF398S8#TRPBF by Analog Devices is a Sample & Hold IC with 15V nominal voltage, 18V max supply limit, and 70°C max operating temp. Ideal for sample and hold circuits in commercial applications due to its bipolar technology and small outline package style.
AD9101AR-REEL
AD9101AR-REEL by Analog Devices is a Sample & Hold IC with 20 terminals, operating at -40 to 85 °C. It features a max droop rate of 40000 V/s, peak reflow temp of 240C, and max acquisition time of 0.016 us. Ideal for industrial applications requiring bipolar technology and sample-and-hold circuit amplifiers.
MAX5168LECM+
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
SMP11N
Analog Devices' SMP11N is a Sample & Hold IC with 7 terminals, operating at ±15V supply voltage. It features a max droop rate of 0.2 V/s and can handle analog input voltages up to ±11V. Ideal for applications requiring fast acquisition times like data acquisition systems.
SHC605AU
Texas Instruments
SHC605AU by Texas Instruments is a Sample & Hold IC with 16 terminals, operating at -40 to 85 °C. It features a max droop rate of 8000 V/s, acquisition time of 0.04 us, and operates on +-5V supplies. Ideal for industrial applications requiring fast signal sampling and holding capabilities in a compact small outline package.
MAX5165NECM+T
AD684AQ
AD684AQ by Analog Devices is a Sample & Hold IC with 4 functions, BICMOS technology, and 1 us acquisition time. It operates at -40 to 85 °C and has a max supply voltage of +-15 V. Ideal for industrial applications requiring precise analog signal sampling and holding capabilities.
MAX5168LECM+ by Analog Devices is a Sample & Hold IC with 48 terminals, BICMOS technology, and 10V nominal voltage. It has a max acquisition time of 4us and operates in industrial temperature range. Ideal for sample and hold circuit applications due to its fast acquisition time and high analog input voltage capabilities.
AD389KD
AD389KD by Analog Devices is a Sample & Hold IC with 14 terminals, operating at -10V to +10V analog input voltage range. It has a max acquisition time of 5us and operates on +/-15V power supplies. Ideal for commercial applications requiring precise sample and hold circuitry in a compact IN-LINE package style.
MAX5167MECM+
MAX5167MECM+ by Analog Devices is a Sample & Hold IC with 48 terminals, BICMOS technology, and 10V nominal voltage. It features a max acquisition time of 4us and operates in industrial temperature range (-40 to 85 °C). Ideal for applications requiring precise analog signal sampling and holding.
SHC5320AH
SHC5320AH by Texas Instruments is a Sample & Hold IC with a max droop rate of 100 V/s. It operates at a nominal voltage of 15V and has an acquisition time of 1.5 us. Ideal for industrial applications requiring precise analog signal sampling and holding capabilities.
AD783AQ
AD783AQ by Analog Devices is a Sample & Hold IC with 8 terminals, BICMOS technology, and 1 V/s droop rate. It operates at -40 to 85 °C, has a max supply voltage of +-6.5 V, and an acquisition time of 0.25 us. Ideal for industrial applications requiring precise analog signal sampling and holding capabilities.
HA1-2420/883
Intersil
HA1-2420/883 by Intersil is a MILITARY-grade Sample & Hold IC with 14 terminals. It operates at -55 to 125 °C, with +-15V power supplies and 10V max analog input voltage. Ideal for fast acquisition time applications in harsh environments.
SMP18FRUZ-REEL7
SMP18FRUZ-REEL7 by Analog Devices is a Sample & Hold IC with 8 functions, CMOS technology, and 5V nominal voltage. It features a max droop rate of 0.04 V/s and is ideal for industrial applications requiring fast acquisition times in a compact package. This surface-mount device has a temperature range of -40 to 85 °C and operates with both positive and negative supply voltages up to ±8.5V.
HA1-5320/883
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
HA3-5340-5
Harris Semiconductor
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MAX5166NCCM-T
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
SMP10BIEY
Analog Devices' SMP10BIEY is a Sample & Hold IC with 14 terminals, 15V nominal voltage, and 0.05 V/s max droop rate. Ideal for sample applications, it operates b/w 0-70 °C and has a -18 to 18V supply voltage limit.
MAX5166LCCM-T
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LF398N/NOPB
National Semiconductor
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LF398N8#PBF
Linear Technology
LF398AN/NOPB
LF398S8#PBF
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LF398AN
LF398H
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-5; Package Shape: ROUND;
Philips Semiconductors
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Style (Meter): CYLINDRICAL;
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; JESD-30 Code: O-MBCY-W8;
Advanced Micro Devices
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIFET;
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Terminal Position: BOTTOM;
LF398MX/NOPB
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LF398N
LF398AN/B+
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved