Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments JM38510/11803SXA is an adjustable negative single output standard regulator with a max operating temp of 150°C. Featuring a max output voltage of 37V and current of 0.5A, it is ideal for applications requiring precise voltage regulation in harsh environments such as military and aerospace systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Electronics Depot
Sunrise Surplus Inc.
Resion
Prism Electronics
Electronic Expediters
Netsource Technology, Inc.
R&J Components
Parana Technologies
$3.438
$3.963
DigiPath Technology Company
$3.786
ChromeModa Solutions
$3.863
$3.168
IDEA Electronic Components Group
$3.477
One Stop Electronics
$7.500
AZTECH Wire
$14.719
Corphita
The use of metal as the package body material provides durability and protection for the internal components, making it suitable for rugged environments or applications where reliability is crucial.
The high maximum operating temperature allows for reliable performance in a wide range of temperature conditions, making this product versatile and suitable for various applications.
The MIL-M-38510 Class S screening level ensures that the product meets strict military standards for quality and reliability, making it a dependable choice for demanding applications.
The bipolar technology used in this product allows for efficient regulation of voltage, ensuring stable and precise output, making it ideal for sensitive electronic devices.
The round package shape offers compactness and ease of integration into various systems, making it a versatile choice for space-constrained applications.
The wire terminal form provides secure connections and flexibility for installation, making it convenient to use in different setups or configurations.
The low minimum operating temperature ensures that the product can operate in extreme cold conditions, making it suitable for applications in challenging environments.
The minimum output voltage of 1.2V provides flexibility in voltage regulation, allowing for precise control and customization of power output for specific requirements.
Having 3 terminals allows for easy connectivity and installation, making it user-friendly and convenient for integrating into different systems or circuits.
The cylindrical package style offers a compact and sleek design, making it visually appealing and suitable for applications where aesthetics matter.
The adjustable feature allows for fine-tuning of the output voltage, providing flexibility and customization based on specific requirements, making it a versatile choice for various applications.
Being an adjustable negative single output standard regulator ensures stable voltage regulation with a single output, making it a reliable choice for powering electronic circuits or devices.
The bottom terminal position allows for easy installation and connection, making it convenient for integrating into different systems or setups with minimal effort.
The high maximum output voltage of 37V provides sufficient power for a wide range of applications, making it versatile and suitable for powering various electronic devices or circuits.
With a maximum output current of 0.5A, this product can provide enough current for powering small to medium-sized electronic devices or components, making it suitable for a variety of applications.
Adjustable Regulators - Negative Single Output Standard JM38510/11803SXA attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Texas Instruments
Adjustability:
JESD-30 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Screening Level:
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
JM38510/11803SXA Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Fairchild Semiconductor
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM337IMPX
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOT-223; Qualification Status: Not Qualified;
LM337T
LM337T by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
LM337LMX
LM337LMX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT1033CT#PBF
Analog Devices
LT1033CT#PBF by Analog Devices is an adjustable negative single output standard regulator with a max output current of 3A and max load regulation of 1.5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring precise voltage regulation.
LM137HPQMLV
LM137HPQMLV by Texas Instruments is a MIL-PRF-38535 Class V rated adjustable negative single output standard regulator with a max output voltage of 37V and total dose of 30k Rad(Si). Operating in temperatures ranging from -55 to 150 °C, it offers a load regulation of 2% making it suitable for applications requiring precise voltage control in harsh environments.
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR;
LM337MP
LM337MP by National Semiconductor is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM337HVH
LM337HVH by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 47V and max input-output voltage differential of 50V. With a package body material of metal, it operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring precise voltage regulation in various electronic devices.
LT337AT#PBF
Analog Devices' LT337AT#PBF is a bipolar adjustable negative single output standard regulator with 3 terminals. It offers a max output voltage of 37V and can handle up to 1.5A output current. Ideal for applications requiring precise voltage regulation in environments with temperatures ranging from 0°C to 125°C.
LT1033CT
LT1033CT by Analog Devices is an adjustable negative single output standard regulator with a max output current of 3A and a max input-output voltage differential of 35V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
LM337KCSE3
LM337KCSE3 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with a rectangular shape and through-hole terminals, providing ease of installation and reliability.
LM337K
LM337K by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
LM337HVH/NOPB
LM337HVH/NOPB by National Semiconductor is an adjustable negative single output standard regulator with a max output current of 1.5A and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
RH137MH#PBF
Analog Devices' RH137MH#PBF is an adjustable negative single output standard regulator with a max output current of 1.5A and max output voltage of 22V. Operating temperature ranges from -55 to 150 °C, making it suitable for industrial applications requiring precise voltage regulation in harsh environments. The package body material is metal, featuring a cylindrical shape with matte tin terminal finish for durability and reliability.
LM337BT
LM337BT by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in different environments.
LM337H
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; No. of Outputs: 1; Maximum Output Current-1: 1.5 A; Adjustability: ADJUSTABLE;
ADP7182AUJZ-R7
ADP7182AUJZ-R7 by Analog Devices is an adjustable negative single output standard regulator with a max output voltage of 28.36V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, very thin profile, shrink pitch, ideal for surface mount designs.
JM38510/11803BXA
JM38510/11803BXA by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and min input voltage of 40V. Operating temperature ranges from -55 to 150°C, making it suitable for military applications requiring high reliability in harsh environments. The package style is cylindrical with a metal body material, ideal for compact designs in aerospace and defense systems.
LM337IMPX/NOPB
LM337IMPX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. The package style is small outline (SO) with gull wing terminals for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Operating Temperature (TJ-Min): -55 Cel; Surface Mount: NO;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Technology: BIPOLAR; Screening Level: MIL-M-38510;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Maximum Output Voltage-1: 1.2 V; Package Shape: ROUND;
JM38510/11804SYA
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: BFM; Terminal Form: PIN/PEG; Maximum Voltage Tolerance: 4 %; Package Shape: ROUND;
JM38510/11803SXA
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Screening Level: MIL-M-38510; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved