Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments' DRV5056A2QDBZR is a Hall effect magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 39mT min magnetic field range. Ideal for applications requiring analog voltage output, such as automotive sensors and industrial automation systems.
Median Price
$0.698
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$0.275
100+ parts
$0.262
1k+ parts
$0.254
10k+ parts
-
Texas Instruments
$0.543
$0.418
$0.220
Chip1Stop
$0.853
$0.563
$0.538
DigiKey
$0.870
$0.493
$0.425
Mouser Electronics
$0.461
$0.426
$0.394
Verical
Digiode
$0.516
Nova Conductors
$0.571
Vyrian
Ampacity Inc.
$0.462
Corphita
$0.489
Argo Parts USA
$0.553
Continental Prestige Electronics
$0.559
Netroflash
$0.542
$0.531
Parana Technologies
$1.771
$2.337
DigiPath Technology Company
$1.950
$1.794
IDEA Electronic Components Group
$1.990
$1.791
ChromeModa Solutions
$1.632
Authorized Procurement Solutions
Provides durability and protection for the sensor, ensuring long-lasting performance in various environments.
Allows for a wide range of input voltages, making it compatible with different power sources.
Compact size for easy integration into various applications without taking up much space.
Utilizes Hall Effect technology for accurate and reliable measurement of magnetic fields.
Low profile design for flexibility in installation and placement in tight spaces.
Sleek and modern design that fits well with contemporary electronic devices.
Efficient operation at lower voltage levels, saving energy and reducing power consumption.
Wide temperature range tolerance for operation in both hot and cold environments.
Wide output range for versatile compatibility with different input systems.
Analog output for precise and continuous monitoring of magnetic field strength.
Can operate in extremely low temperatures, suitable for a variety of industrial applications.
Provides a corrosion-resistant finish for long-term reliability and performance.
Low power consumption for efficient operation and extended battery life.
Durable plastic housing for protection against external elements and impacts.
Sensitivity to a wide range of magnetic field strengths, suitable for various applications.
High output current capability for powering external devices or circuits.
Compact and lightweight design for easy integration into small electronic devices.
Secure and reliable solder termination for stable electrical connections.
Easy mounting on PCBs or other surfaces for convenient installation in electronic systems.
Magnetic Field Sensors DRV5056A2QDBZR attributes and parameters. Explore more Magnetic Field Sensors devices from Texas Instruments
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
JESD-609 Code:
Minimum Range Of Magnetic Field:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Output Range:
Output Type:
Package Body Material:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
DRV5056A2QDBZR Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - SOT devices Marking 05//Feb/2024
PCN Assembly/Origin - Assembly Site 12/Jun/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1552200168
Molex
WIRE AND CABLE;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Micropac Industries
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TMAG5170A2QDGKR
TMAG5170A2QDGKR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 2.3-5.5V and output range of 0.4-4.6V. Ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.
DRV5013ADQDBZTQ1
DRV5013ADQDBZTQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 5.4 mT, output range of 0-30mA, and max supply voltage of 38V. Ideal for automotive applications due to AEC-Q100 screening level, it offers current output via open-drain interface in a compact rectangular package.
MCS1806GS-3-05-Z
Monolithic Power Systems
MAGNETIC FIELD SENSOR,HALL EFFECT;
A1308KUATN-2-T
Allegro MicroSystems
A1308KUATN-2-T by Allegro MicroSystems is a magnetic field sensor with 5.5V max supply voltage, 2.5 mV/G sensitivity, and -40 to 125°C operating temperature range. Ideal for applications requiring precise analog voltage output based on magnetic field strength.
SS496A-S
Honeywell Sensing And Control
MMC5603NJ
Memsic
Magnetic Field Sensors;
SS49E-T2
SS49E-T2 by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package with through hole mounting.
A1102ELHLT-T
Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.
TLE49452LHALA1
Infineon Technologies
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
ALS31313KLEATR-1000
ALS31313KLEATR-1000 by Allegro MicroSystems is a 3-axis magnetic field sensor with a supply voltage range of 2.65V to 3.5V, operating temperature from -40°C to 125°C, and max current of 3.9mA. It features an open-drain digital voltage output interface and is ideal for automotive applications requiring precise magnetic field measurements in a compact rectangular package suitable for surface mount installation.
A3212LLHLT-T
A3212LLHLT-T by Allegro MicroSystems is a magnetic field sensor with a max supply voltage of 3.5V and hysteresis of 0.59mT, suitable for automotive applications due to its AEC-Q100 screening level. This Hall effect sensor operates b/w -40°C to 150°C, offering a digital current output type and CMOS technology for precise magnetic field detection up to 6.5mT in compact rectangular packaging ideal for surface mount installations.
A1102LLHLT-T
A1102LLHLT-T by Allegro MicroSystems is a magnetic field sensor with hysteresis of 5.5 mT, operating temperature range from -40 to 150 °C, and voltage output. It is ideal for automotive applications due to its AEC-Q100 screening level, BICMOS technology, and surface mounting feature.
AH3774-P-B
Diodes Incorporated
AH3774-P-B by Diodes Inc. is a magnetic field sensor with 3-28V supply, -40 to 125°C temp range, and 8mT hysteresis. Ideal for current output applications like automotive sensors and industrial control systems due to its compact rectangular design and through-hole mounting feature.
AD22150Y
Analog Devices
AD22150Y by Analog Devices is a Hall effect magnetic field sensor with -1.2 mT to 1.2 mT range, providing digital voltage output. It comes in a rectangular package for through-hole mounting applications, terminated with solder connections. Ideal for precise magnetic field measurements in various industrial and consumer electronics devices.
S-5743NBH1A-M3T4U
Ablic
S-5743NBH1A-M3T4U by Ablic is a magnetic field sensor with a max supply voltage of 26V and hysteresis of 6mT. It has a current output range of 22-70mA, making it suitable for applications requiring precise measurement and control of magnetic fields.
DRV5056A4QLPG
Texas Instruments' DRV5056A4QLPG is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 155mT min magnetic field range. Ideal for applications requiring analog voltage output, such as position sensing in automotive systems or industrial equipment.
ATS128LSETN-T
ATS128LSETN-T by Allegro MicroSystems is a magnetic field sensor with 3-24V supply voltage range, -40 to 150°C operating temperature, and 30-90mA current output. Ideal for applications requiring precise current sensing in a compact 7" rectangular package with through-hole mounting.
SS460S-T2
SS460S-T2 by Honeywell is a magnetic field sensor with 3-24V supply voltage range, -40 to 150°C operating temperature, and 5.5mT magnetic field range. Ideal for current output applications, it features a rectangular shape, through-hole mounting, and solder termination.
DRV5013ADQLPG
DRV5013ADQLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 38V and hysteresis of 5.4mT. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise digital voltage output based on magnetic field strength measurements. With a compact rectangular design, this sensor is ideal for through-hole mounting in diverse industrial settings.
MLX91208LDC-CAH-000-TU
Melexis N V
MLX91208LDC-CAH-000-TU by Melexis N V is a magnetic field sensor with 5V supply, -25 to 25mT range, and AEC-Q100 screening. Ideal for automotive applications due to its Hall effect technology, single-ended output, and AEC-Q100 compliance. With a compact size of 4.89mm x 3.9mm x 1.64mm, it's suitable for surface mount installations in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
DRV5023AJQLPG
DRV5023AJQLPG by Texas Instruments is a magnetic field sensor with 38V max supply voltage, 3.7mT hysteresis, and -40 to 125°C operating temp range. Ideal for applications requiring precise digital voltage output in unipolar input mode.
DRV5023BIQDBZT
DRV5023BIQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 8.5mT. It operates in temperatures from -40°C to 125°C, offering an output range of 0-38V via open-drain interface. Ideal for applications requiring precise digital voltage output based on magnetic field detection.
DRV5053OAQLPG
DRV5053OAQLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 38V. It has a compact body width of 1.52 inch and a height of 5.05 mm. This sensor is commonly used in applications requiring voltage output for measuring magnetic fields, such as robotics and automotive systems.
DRV5053CAQLPG
DRV5053CAQLPG by Texas Instruments is a magnetic field sensor with a voltage output range of 0-2V. It operates b/w -40 to 125°C, with a supply voltage range of 2.5V to 38V. Ideal for applications requiring precise Hall effect sensing in compact spaces.
DRV5023FAEDBZRQ1
Texas Instruments' DRV5023FAEDBZRQ1 is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 150 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a compact rectangular package.
DRV5033AJQDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-30mA; Hysteresis: 3.4 mT;
DRV5053OAQDBZT
Texas Instruments' DRV5053OAQDBZT is a magnetic field sensor with voltage output, operating b/w -40 to 125°C. It has a supply voltage range of 2.5-38V and can handle up to 3.6mA current. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5032FBDBZR
DRV5032FBDBZR by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5033AJEDBZRQ1
Texas Instruments' DRV5033AJEDBZRQ1 is a magnetic field sensor with hysteresis of 3.4 mT and output range of 0-38V. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 150 °C and has a max supply voltage of 38V.
DRV5053EAQDBZT
Texas Instruments' DRV5053EAQDBZT is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5033AJQDBZTQ1
DRV5033AJQDBZTQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is used in automotive applications for precise detection of magnetic fields in harsh environments.
DRV5053VAQDBZRQ1
DRV5053VAQDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers an analog output voltage range of 0-2V, making it suitable for automotive applications requiring precise magnetic field detection in harsh environments compliant with AEC-Q100 standards.
DRV5033AJQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Output (V): OPEN-DRAIN;
DRV5055A2EDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Maximum Operating Temperature: 150 Cel;
DRV5013AGQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Termination Type: SOLDER;
DRV5032FDDMRT
DRV5032FDDMRT by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5055A3QLPGM
Texas Instruments' DRV5055A3QLPGM is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and -1-1mA analog current output. Ideal for applications requiring precise Hall effect sensing in a compact 4x1.52x5.05mm rectangular package with through-hole mounting.
DRV5053OAQLPGMQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-2.3mA; JESD-609 Code: e3;
DRV5033AJQLPGMQ1
DRV5033AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is used in automotive applications for precise current measurement and detection of magnetic fields in the range of 1-12 mT.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved