Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments DRV5011ADDMRT is a magnetic field sensor with 5.5V max supply voltage, -40 to 135°C operating temp range, and 4mT hysteresis. Ideal for applications requiring current output sensing in a compact rectangular package.
Median Price
$0.652
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.880
100+ parts
$0.627
1k+ parts
-
10k+ parts
Mouser Electronics
$0.423
$0.383
Nova Conductors
$0.460
Digiode
$1.036
Chip Stock
Vyrian
Aranea Global
$0.451
$0.433
Argo Parts USA
$0.446
Continental Prestige Electronics
Ampacity Inc.
$0.780
Corphita
$0.981
Parana Technologies
$1.943
$2.477
DigiPath Technology Company
$2.139
$1.968
ChromeModa Solutions
$2.183
$1.790
IDEA Electronic Components Group
$1.965
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
A higher maximum supply voltage allows for greater flexibility in power source options.
Low hysteresis ensures accurate and precise measurements of magnetic fields.
Compact size makes for easy installation and integration into various systems.
Utilizes Hall Effect technology which is known for its reliability and accuracy in measuring magnetic fields.
Slim profile enables placement in tight spaces without compromising performance.
Rectangular shape allows for easy mounting and secure placement in a variety of applications.
Low minimum supply voltage helps in power efficiency and compatibility with various systems.
High maximum operating temperature ensures functionality in a wide range of environments.
Wide output range provides versatility in signal output for different applications.
Current output is often preferred for its immunity to noise and interference.
Low minimum operating temperature allows for use in cold environments without performance issues.
Matte tin finish provides good conductivity and corrosion resistance for reliable connections.
Push-pull output configuration helps in driving signals over longer distances without loss.
Low operating current helps in power efficiency and reduced heat generation.
Plastic housing offers lightweight design and durability for long-lasting performance.
A broad range of magnetic field measurement allows for versatile applications.
High maximum output current capability provides strong signal strength for demanding applications.
Bipolar latched input mode helps in accurate and stable readings of magnetic fields.
Wide magnetic field range allows for detection of various magnetic field strengths.
Compact dimensions for easy integration into different systems.
Solder termination provides secure and reliable electrical connections.
Surface mount capability allows for easy and secure installation on PCBs or other surfaces.
Magnetic Field Sensors DRV5011ADDMRT attributes and parameters. Explore more Magnetic Field Sensors devices from Texas Instruments
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Hysteresis:
Input Mode:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Maximum Output Current:
Output Range:
Output Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
DRV5011ADDMRT Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 09/Nov/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Promax-johnton
A1308LLHLX-05-T
Allegro MicroSystems
Allegro MicroSystems A1308LLHLX-05-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.5mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on Hall effect technology in a compact rectangular package.
TLE4935L
Siemens
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Input Mode: BIPOLAR;
ZMZ20M
Diodes Incorporated
ZMZ20M by Diodes Inc. is a MAGNETIC FIELD SENSOR with 50mT Hysteresis, 7mV/G Sensitivity, and -25 to 125°C Operating Temp. Ideal for applications requiring ANALOG VOLTAGE output in magnetic field detection systems.
DRV5032FDLPGM
DRV5032FDLPGM by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 1.5mT hysteresis, and -40 to 85°C operating temperature range. Ideal for applications requiring digital current output in a compact rectangular package, such as proximity sensing and position detection in various electronic devices.
MLX90242ESE-GAA-000-RE
Melexis N V
MLX90242ESE-GAA-000-RE by Melexis N V is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 85°C operating temperature, and digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.
OHS3131U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
S-5716ACDL1-M3T1U
Ablic
Ablic's S-5716ACDL1-M3T1U is a magnetic field sensor with 5.5V max supply voltage, 0.8mT hysteresis, and 0.40-4.60V output range. Ideal for applications requiring precise detection of magnetic fields in compact spaces with temperatures ranging from -40 to 85°C.
SS466A-L
Honeywell Sensing And Control
SS466A-L by Honeywell is a magnetic field sensor with a supply voltage range of 3.8V to 30V and operating temperatures from -40°C to 150°C. It offers a digital current output up to 20mA, suitable for applications requiring precise magnetic field detection in various industries. With a compact rectangular design and through-hole mounting feature, it provides reliable performance in detecting magnetic fields ranging from -18mT to +18mT.
A1128LUA-T
Allegro MicroSystems' A1128LUA-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and output current of 30-90mA. Ideal for applications requiring precise Hall effect sensing in temperatures ranging from -40 to 150°C. Package style: Rectangular plastic/epoxy body measuring 1.52" x 4.09mm x 5.26mm for through-hole mounting.
DRV5055A2QDBZR
DRV5055A2QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 3-3.63V and operating temperature from -40 to 125°C. It features an output range of -1-1mA, suitable for applications requiring precise analog current output in a compact rectangular package ideal for surface mount installations.
MLX90290LSE-AAA-310-RE
MLX90290LSE-AAA-310-RE by Melexis N V is a 3-terminal Hall effect magnetic field sensor with 1.5% linearity, operating b/w -40 to 150°C. It features an analog current output, CMOS technology, and can handle up to 8mA current. Ideal for surface mount applications in automotive and industrial sectors.
MLX90363LDC-ABB-000-RE
MLX90363LDC-ABB-000-RE by Melexis N V is a magnetic field sensor with 3.15V to 3.45V supply voltage range, -40°C to 150°C operating temperature, and SPI output interface. It is ideal for applications requiring digital voltage output in a compact rectangular package, such as automotive sensors and industrial control systems.
A1342LUCTN-T
Allegro MicroSystems' A1342LUCTN-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 20-50mA digital current output. Ideal for applications requiring precise magnetic field detection in a compact 1.5" x 4mm package with through-hole mounting.
A1211LUA-T
Allegro MicroSystems' A1211LUA-T is a magnetic field sensor with 24V max supply voltage, 18mT hysteresis, and 400mV output range. Ideal for applications requiring precise non-inverting analog voltage output in a compact rectangular package.
ARS19510LUBBTN-RSWPHUJ
Magnetic Field Sensors;
MLX92211LSE-AEA-000-RE
MLX92211LSE-AEA-000-RE by Melexis N V is a magnetic field sensor with 2.7V to 24V supply voltage range, -40°C to 150°C operating temperature, and 30-80mA current output. It is used in automotive applications for precise magnetic field detection in a compact rectangular package.
MRMS511X-001
Murata Manufacturing
MRMS511X-001 by Murata is a magnetic field sensor with 1.2" width, 0.55mm height, and 3.5V max supply voltage. It operates b/w -40 to 85°C, outputs 0.2-1.6V voltage range, and detects magnetic fields from 0.8mT to 2mT. Ideal for surface mount applications requiring precise magnetoresistive sensing capabilities.
A1210LLHLT-T
A1210LLHLT-T by Allegro MicroSystems is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 15.5mT. It is commonly used in applications requiring non-inverting analog voltage output for detecting magnetic fields up to 15mT.
A1324LLHLX-T
Allegro MicroSystems' A1324LLHLX-T is a magnetic field sensor with 5.5V max supply voltage, 1.5% linearity, and 5000 mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperature ranges from -40 to 150°C.
A1102LLHLT-T
A1102LLHLT-T by Allegro MicroSystems is a magnetic field sensor with hysteresis of 5.5 mT, operating temperature range from -40 to 150 °C, and voltage output. It is ideal for automotive applications due to its AEC-Q100 screening level, BICMOS technology, and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
DRV5023AJQLPG
DRV5023AJQLPG by Texas Instruments is a magnetic field sensor with 38V max supply voltage, 3.7mT hysteresis, and -40 to 125°C operating temp range. Ideal for applications requiring precise digital voltage output in unipolar input mode.
DRV5023BIQDBZT
DRV5023BIQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 8.5mT. It operates in temperatures from -40°C to 125°C, offering an output range of 0-38V via open-drain interface. Ideal for applications requiring precise digital voltage output based on magnetic field detection.
DRV5053OAQLPG
DRV5053OAQLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 38V. It has a compact body width of 1.52 inch and a height of 5.05 mm. This sensor is commonly used in applications requiring voltage output for measuring magnetic fields, such as robotics and automotive systems.
DRV5053CAQLPG
DRV5053CAQLPG by Texas Instruments is a magnetic field sensor with a voltage output range of 0-2V. It operates b/w -40 to 125°C, with a supply voltage range of 2.5V to 38V. Ideal for applications requiring precise Hall effect sensing in compact spaces.
DRV5023FAEDBZRQ1
Texas Instruments' DRV5023FAEDBZRQ1 is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 150 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a compact rectangular package.
DRV5033AJQDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-30mA; Hysteresis: 3.4 mT;
DRV5053OAQDBZT
Texas Instruments' DRV5053OAQDBZT is a magnetic field sensor with voltage output, operating b/w -40 to 125°C. It has a supply voltage range of 2.5-38V and can handle up to 3.6mA current. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5032FBDBZR
DRV5032FBDBZR by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5033AJEDBZRQ1
Texas Instruments' DRV5033AJEDBZRQ1 is a magnetic field sensor with hysteresis of 3.4 mT and output range of 0-38V. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 150 °C and has a max supply voltage of 38V.
DRV5053EAQDBZT
Texas Instruments' DRV5053EAQDBZT is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise magnetic field detection in compact spaces.
DRV5033AJQDBZTQ1
DRV5033AJQDBZTQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is used in automotive applications for precise detection of magnetic fields in harsh environments.
DRV5053VAQDBZRQ1
DRV5053VAQDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers an analog output voltage range of 0-2V, making it suitable for automotive applications requiring precise magnetic field detection in harsh environments compliant with AEC-Q100 standards.
DRV5033AJQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Output (V): OPEN-DRAIN;
DRV5055A2EDBZRQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Maximum Operating Temperature: 150 Cel;
DRV5013AGQDBZR
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Termination Type: SOLDER;
DRV5032FDDMRT
DRV5032FDDMRT by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
DRV5055A3QLPGM
Texas Instruments' DRV5055A3QLPGM is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and -1-1mA analog current output. Ideal for applications requiring precise Hall effect sensing in a compact 4x1.52x5.05mm rectangular package with through-hole mounting.
DRV5053OAQLPGMQ1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-2.3mA; JESD-609 Code: e3;
DRV5033AJQLPGMQ1
DRV5033AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is used in automotive applications for precise current measurement and detection of magnetic fields in the range of 1-12 mT.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved