Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Allegro MicroSystems A1309KUA-9-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 11.5mA max current. Ideal for applications requiring precise analog voltage output based on Hall effect technology in a compact rectangular package design.
Median Price
$1.230
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.620
100+ parts
$1.177
1k+ parts
$1.073
10k+ parts
$0.937
Mouser Electronics
$1.180
$1.030
$0.897
Rochester
-
$0.810
$0.672
$0.599
Verical
$0.840
$0.749
Nova Conductors
$0.936
Chip Stock
Vyrian
VNN
Semicontronic
$0.520
$0.507
$0.504
Ampacity Inc.
Aranea Global
$0.917
$0.881
Advanced Electronics
$0.929
Continental Prestige Electronics
Argo Parts USA
Aztec Data Supply Inc.
$2.750
Perfect Parts
Authorized Procurement Solutions
Allows for a wide range of voltage input, making the product versatile and compatible with various power sources.
Compact size makes the sensor easy to fit into different devices or applications without taking up too much space.
Utilizes Hall effect technology for accurate and reliable magnetic field sensing.
Provides analog voltage output for easy interfacing with other components or systems.
Can operate in high temperature environments, expanding the range of applications where the sensor can be used.
Capable of functioning in low temperature conditions, ensuring reliable performance in a variety of environments.
Low resistance value helps in minimizing power losses and improving the efficiency of the sensor.
Solder termination provides a secure and reliable connection for the sensor, ensuring stability during operation.
Easy to mount onto PCBs or other surfaces using through hole mounting, simplifying the integration process.
Magnetic Field Sensors A1309KUA-9-T attributes and parameters. Explore more Magnetic Field Sensors devices from Allegro MicroSystems
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Shape or Style:
Resistance:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
PCN Packaging - Tape Change 27/Jan/2023
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
55100-3H-02-A
Hamlin Electronics Europe
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Power Supplies (V): 3.8/24;
SS411A
Honeywell Sensing And Control
SS411A by Honeywell is a magnetic field sensor with 24V max supply voltage, 5mT hysteresis, and 1.57" body width. It is used for detecting magnetic fields in applications requiring -40 to 150°C operating temperature range, such as automotive sensors and industrial controls.
TLE4941
Infineon Technologies
TLE4941 by Infineon is a magnetic field sensor with 4.5-16.5V power supply, 8.4mA max operating current, and -20mT min magnetic field range. It features a digital current output and is used in applications requiring Hall effect sensors for differential output interface via 2-wire interface mounting through hole solder termination.
A1337LLETR-T
Allegro MicroSystems
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Operating Frequency: 10000 Hz;
HAL506SF-A
TDK
HAL506SF-A by TDK is a magnetic field sensor with 24V max supply voltage, 2mT hysteresis, and 0-20mA analog current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions and surface mounting feature.
SS495A1-T2
SS495A1-T2 by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3mm body height, and 1.5% linearity. Ideal for applications requiring precise sensing of magnetic fields in the range of -67mT to 67mT. Features transistor output circuit type and operates b/w -40°C to 150°C temperature range.
AH3391Q-SA-7
Diodes Incorporated
Diodes Inc. AH3391Q-SA-7 is a magnetic field sensor with 3 terminals, operating voltage range of 3-28V, and hysteresis of 2.5mT. AEC-Q100 screening makes it ideal for automotive applications requiring current output in the range of 30-55mA. With a wide temperature range (-40 to 150°C) and compact rectangular package, it suits surface mount installations in harsh environments.
TCS40DLR,LF
Toshiba
Toshiba's TCS40DLR,LF is a magnetic field sensor with 1.4mT hysteresis and 0-5.5V digital output range. Ideal for applications requiring precise magnetic field detection in a compact form factor, such as IoT devices or automotive sensors. Operating temperature ranges from -40 to 85°C, making it versatile for various environments.
A1101LLHLT-T
Allegro MicroSystems' A1101LLHLT-T is a Hall effect magnetic field sensor with 3.8V to 24V supply voltage range, -40°C to 150°C operating temperature, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level and BICMOS technology for precise voltage output in a compact rectangular package.
A1125LUA-T
Allegro MicroSystems A1125LUA-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 1mT. Ideal for automotive applications due to AEC-Q100 screening, BICMOS technology, and current output ranging from 30-60mA. With a compact rectangular plastic housing and through-hole mounting feature, it offers precise unipolar sensing in harsh environments.
DRV5032FCDBZR
Texas Instruments
DRV5032FCDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 85 °C, and output type of digital current. It is used for detecting magnetic fields in applications requiring precise measurements such as automotive sensors and industrial automation systems.
SS461A-T2
SS461A-T2 by Honeywell is a magnetic field sensor with 3.8-30V power supply, -40 to 150°C operating temp, and 5-8.5mT magnetic field range. It has a rectangular plastic package and through-hole mounting feature, suitable for applications requiring digital current output in industrial environments.
DRV5056A1QDBZR
DRV5056A1QDBZR by Texas Instruments is a magnetic field sensor with an output range of -1-1mA and analog current output type. It operates b/w -40 to 125°C, suitable for various applications requiring precise magnetic field detection. With a max supply voltage of 3.6V and compact rectangular package style, it is ideal for surface mount installations in electronic devices.
DRV5032FADBZR
Texas Instruments' DRV5032FADBZR is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 85 °C, and output current up to 5 A. Ideal for applications requiring precise digital current output in a compact rectangular package for surface mount assembly.
TMAG5273A1QDBVR
TMAG5273A1QDBVR by Texas Instruments is a 6-terminal magnetic field sensor with voltage output range of 0-5.5V, ideal for Hall effect applications. It operates b/w -40 to 125°C, with max supply voltage of 3.6V and output current up to 2A. Suitable for surface mount installations in various electronic devices.
DRV5055A2EDBZRQ1
Texas Instruments' DRV5055A2EDBZRQ1 is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 150°C operating temperature, and -1-1mA output current. Ideal for automotive applications due to AEC-Q100 screening level, it features Hall effect technology in a compact rectangular package for surface mounting.
APS13291KLHALT
APS13291KLHALT by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 10mT hysteresis, and 3mA max operating current. It is a Hall effect sensor with voltage output ideal for surface mount applications in various industries.
ACS716KLATR-12CB-T
Allegro MicroSystems' ACS716KLATR-12CB-T is a magnetic field sensor with 16 terminals, offering 0.75% linearity and operating b/w -40°C to 125°C. It has a max supply voltage of 3.6V, outputting analog voltage at a max current of 11mA. Ideal for applications requiring precise magnetic field sensing in compact spaces.
SS552MT
SS552MT by Honeywell is a magnetic field sensor with a max supply voltage of 30V and output range of 20mA. Ideal for applications requiring precise magnetic field detection, it operates in temperatures ranging from -40 to 150°C. With a compact rectangular design, it offers a solder termination type and surface mounting feature.
TLE4923HALA1
TLE4923HALA1 by Infineon Tech. is a magnetic field sensor with 18V max supply voltage, 1.5mT hysteresis, and 8.5mV/G sensitivity. It features a digital output interface, suitable for applications requiring precise magnetic field detection in compact spaces like automotive sensors or industrial automation systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A1308KUA-1-T
Allegro MicroSystems' A1308KUA-1-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 11.5mA max current. Ideal for applications requiring Hall effect sensors in through-hole mounting style with analog voltage output.
A1302ELHLX-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.25-4.65V;
A1302KLHLX-T
A1308LLHLT-5-T
MAGNETIC FIELD SENSOR,HALL EFFECT;
A1308KUA-2-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Resistance: 3 ohm;
A1308LLHLX-1-T
Allegro MicroSystems' A1308LLHLX-1-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 1.3 mV/G sensitivity. Ideal for applications requiring precise analog voltage output in compact spaces like automotive sensors or industrial control systems.
A1309LLHLX-9-T
Allegro MicroSystems' A1309LLHLX-9-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 9mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on magnetic field strength in compact dimensions of 1.91" x 2.98mm for surface mount installations.
A1308LLHLX-2-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 5.5 V;
A1308LLHLT-1-T
A1308LLHLX-05-T
Allegro MicroSystems A1308LLHLX-05-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.5mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on Hall effect technology in a compact rectangular package.
A1308KUATN-1-T
A1308KUATN-1-T by Allegro MicroSystems is a magnetic field sensor with a max supply voltage of 5.5V and sensitivity of 1.3mV/G. It is commonly used in applications such as automotive systems, industrial control, and robotics due to its high operating temperature range (-40°C to 125°C) and through-hole mounting feature.
A1309LLHLT-9-T
A1308KUA-3-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 4.5 V; Maximum Operating Current: 11.5 mA;
A1308KUATN-2-T
A1308KUATN-2-T by Allegro MicroSystems is a magnetic field sensor with 5.5V max supply voltage, 2.5 mV/G sensitivity, and -40 to 125°C operating temperature range. Ideal for applications requiring precise analog voltage output based on magnetic field strength.
A1308LLHLT-2-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Width: 1.91 inch;
A1308LLHLX-3-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Package Equivalence Code: TO-236;
A1308LLHLT-3-T
A1308LLHLX-5-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Body Width: 1.91 inch;
A1309LLHLX-RP9-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
A1309KUATN-9-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4.09 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved