Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Texas Instruments ADS1271IBPWR is a 24-bit ADC with 0.0015% EL, operating at 105°C max temp. It features a sample rate of 0.105 MHz and accepts analog input voltages from -2.5V to 5.25V. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs.
Median Price
$12.588
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$13.688
100+ parts
$11.957
1k+ parts
$8.246
10k+ parts
-
Arrow
$11.488
Digiode
$13.004
Vyrian
Chip Stock
VNN
Connect4Technologies Inc.
Nova Conductors
Cogito LLC
Parana Technologies
$5.681
$6.474
DigiPath Technology Company
$6.255
IDEA Electronic Components Group
$6.383
$5.745
ChromeModa Solutions
$5.234
Ampacity Inc.
$9.030
Semicontronic
$8.804
$8.759
AZTECH Wire
$10.850
Corphita
$12.319
Corohmni
$17.643
Advanced Electronics
$26.052
$24.749
Lixinc
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Kepictronics
Bastille Electronics
Futuretech Components
The use of plastic/epoxy material makes this product lightweight and cost-effective.
With surface mount capability, this product can be easily integrated into various electronic devices.
The rectangular package shape allows for efficient use of space on a circuit board.
The 24-bit resolution ensures accurate conversion of analog signals to digital data.
The extremely low linearity error ensures precise conversion without distortion.
This product supports multiple power supply options for flexibility in design.
With 16 terminals, this product offers versatile connectivity options.
The compact package style saves space and allows for efficient PCB layout.
The low minimum supply voltage allows for operation in energy-efficient applications.
The high maximum operating temperature ensures reliable performance in various environments.
Analog-to-Digital Converters ADS1271IBPWR attributes and parameters. Explore more Analog-to-Digital Converters devices from Texas Instruments
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Maximum Conversion Time:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Current:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
ADS1271IBPWR Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1552200168
Molex
WIRE AND CABLE;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
43025-0400
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Yangzhou Yangjie Electronics
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
AD7683BRMZ
Analog Devices
AD7683BRMZ by Analog Devices is a 16-bit ADC with 0.0046% EL, operating at 0-85°C. It features a sample rate of 0.1 MHz, binary output code, and 2.7V nominal voltage. Ideal for industrial applications requiring precise analog-to-digital conversion in compact spaces.
ADS1115QDGSRQ1
Texas Instruments' ADS1115QDGSRQ1 is a 16-bit ADC with 4 analog in channels, operating at -40 to 125°C. Ideal for automotive applications, it offers a max linearity error of 0.0015%, accepts input voltages from -4.096V to 4.096V, and outputs data in serial format.
ADS1100A0IDBVR
The Texas Instruments ADS1100A0IDBVR is a 16-bit ADC with 0.0125% linearity error, operating at 5V. Ideal for industrial applications, it offers a sample rate of 0.000128 MHz and output in serial format. With a small outline package style and dual terminal position, this converter is suitable for compact designs requiring precise analog-to-digital conversion.
AD7608BSTZ
AD7608BSTZ by Analog Devices is an 18-bit ADC with 8 analog input channels, operating at a sample rate of 0.2 MHz. It features a max linearity error of 0.0029%, suitable for industrial applications requiring precise analog-to-digital conversion in a compact package style.
ADC128S102CIMTX
ADC128S102CIMTX by Texas Instruments is a 12-bit ADC with 8 analog in channels, 1 MHz sample rate, and 0.0244% max linearity error. Ideal for industrial applications, it operates b/w -40 to 105°C and has a small outline package style.
LTC2246IUH#PBF
LTC2246IUH#PBF by Analog Devices is a 14-bit ADC with 0.0244% EL, 25 MHz sample rate, and 1.9V max analog input voltage. Ideal for industrial applications requiring high precision data conversion in a compact chip carrier package with quad terminals.
ADS1262IPW
The Texas Instruments ADS1262IPW is a 32-bit ADC with 10 analog input channels, 0.0012% linearity error, and 0.038 MHz sample rate. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 2.7-5V. The small outline package has a dual terminal position and Gull Wing form factor.
ADS7844N/1KG4
The Texas Instruments ADS7844N/1KG4 is a 12-bit ADC with 8 analog input channels, 0.0488% linearity error, and 0.75 us conversion time. Ideal for industrial applications requiring high-speed data acquisition in a compact form factor. Operates at temperatures ranging from -40 to 85 °C with a supply voltage of 2.7 V.
LTC2440IGN#PBF
LTC2440IGN#PBF by Analog Devices is a 24-bit ADC with 0.0015% EL, 0.35 MHz sample rate, and 170000 us conversion time. Ideal for industrial applications requiring high precision analog-to-digital conversion in a compact package.
ADS7844NBG4
ADS7844NBG4 by Texas Instruments is a 12-bit ADC with 8 analog input channels, 0.0244% max linearity error, and 0.2 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package. Operates at temperatures from -40 to 85°C with a supply voltage range of 1.9-5V.
LTC2493CDE#PBF
Linear Technology
ADC, DELTA-SIGMA; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR;
LTC1867LIGN#WTRPBF
Analog Devices' LTC1867LIGN#WTRPBF is a 16-bit ADC with 8 analog in channels, 0.0061% EL, and 0.175 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion within -40 to 85 °C temperature range. Package: PLASTIC/EPOXY, Surface Mount, AEC-Q100 screening level.
LTC1867ACGN#PBF
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC2333ILX-16#PBF
ADC, SUCCESSIVE APPROXIMATION; Terminal Finish: Matte Tin (Sn); Output Bit Code: OFFSET BINARY; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MAX11613EUA+T
Maxim Integrated
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
AD7490BRUZ-REEL
AD7490BRUZ-REEL by Analog Devices is a 12-bit ADC with 16 analog input channels, operating at a sample rate of 1 MHz. It features a max linearity error of 0.0244%, suitable for industrial applications requiring precise analog-to-digital conversion in a compact package.
ADS1148IRHBR
The Texas Instruments ADS1148IRHBR is a 16-bit ADC with 8 analog input channels, operating at a max conversion time of 0.002 us. Ideal for industrial applications, it offers a max linearity error of 0.0015%, operates b/w -40 to 105 °C, and supports supply voltages of 3.3V and 5V.
MAX11604EEE+
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
ADS124S06IPBSR
ADS124S06IPBSR by Texas Instruments is a 24-bit ADC with 6 analog input channels. It operates at a min supply voltage of 2.7V and has a max operating temperature of 125°C. This converter is commonly used in automotive applications due to its temperature grade and compact package design.
ADC128D818CIMT/NOPB
National Semiconductor
A/D CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADS1115IDGST
The Texas Instruments ADS1115IDGST is a 16-bit ADC with 4 analog in channels, 0.0015% EL, and 3.3V power supply. Ideal for automotive applications, it offers a sample rate of 0.00086 MHz and operates b/w -40 to 125 °C. With a small outline package style and Gull Wing terminal form, it's suitable for compact designs requiring precise analog-to-digital conversion.
ADS1115IDGSR
The Texas Instruments ADS1115IDGSR is a 16-bit ADC with 4 analog input channels, operating at 3.3V. It offers a max linearity error of 0.0015%, sample rate of 0.00086 MHz, and output in serial format. Ideal for automotive applications due to its temperature grade and small form factor.
ADS1248IPWR
ADS1248IPWR by Texas Instruments is a 24-bit ADC with 8 analog in channels, 0.0015% max linearity error, and 2'S complement binary output. Ideal for industrial applications requiring high precision data conversion at temperatures ranging from -40 to 125°C.
ADS1220IPWR
The Texas Instruments ADS1220IPWR is a 24-bit ADC with 4 analog in channels, operating at a sample rate of 0.002 MHz. It has a max linearity error of 0.0015% and operates on a 3.3V supply voltage. Ideal for automotive applications due to its temperature grade and small form factor.
ADS1115BQDGSRQ1
ADS1115BQDGSRQ1 by Texas Instruments is a 16-bit ADC with 4 analog input channels. It operates at a min supply voltage of 2V and has a max operating temperature of 125°C. This automotive-grade converter is commonly used in applications requiring high-precision analog-to-digital conversion.
ADS1232IPWR
ADS1232IPWR by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at 5V. It features 0.001% max linearity error, 0.00008 MHz sample rate, and outputs in serial format. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
ADS1258IRTCT
The Texas Instruments ADS1258IRTCT is a 24-bit ADC with 16 analog in channels, 0.001% EL, and 0.125 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact chip carrier package.
ADS1115IRUGR
The Texas Instruments ADS1115IRUGR is a 16-bit ADC with 4 analog input channels, operating at 3.3V. With a max linearity error of 0.0015%, it's ideal for automotive applications due to its wide temperature range (-40 to 125°C) and compact chip carrier package style. The converter type is delta-sigma, offering a sample rate of 0.00086 MHz and serial output format.
ADS1115IRUGT
The Texas Instruments ADS1115IRUGT is a 16-bit ADC with 4 analog input channels, operating at a sample rate of 0.00086 MHz. It has a max linearity error of 0.0015% and operates on a nominal voltage of 3.3V. Ideal for automotive applications due to its temperature grade and compact chip carrier package style.
ADS1220IPW
The Texas Instruments ADS1220IPW is a 24-bit ADC with 4 analog in channels, 0.0015% max linearity error, and 3.3V power supply. Ideal for automotive applications due to its small size, high accuracy, and low power consumption. Supports serial output at 0.002 MHz sample rate for precise data conversion.
ADS1118IDGSR
Texas Instruments ADS1118IDGSR is a 16-bit ADC with 4 analog in channels, 0.0015% linearity error, and 3.3V nominal voltage. Ideal for automotive applications due to its small outline package and -40 to 125°C operating temperature range.
ADS1248IPW
The Texas Instruments ADS1248IPW is a 24-bit ADC with 8 analog input channels, operating at a sample rate of 0.002 MHz. It features a max linearity error of 0.0015%, suitable for industrial applications requiring precise analog-to-digital conversion. With a small outline package and low power supply voltage of 2.7V, it is ideal for compact and energy-efficient designs.
ADS1256IDBT
ADS1256IDBT by Texas Instruments is a 24-bit ADC with 8 analog input channels. It operates at a sample rate of 0.03 MHz and has a max linearity error of 0.001%. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.
ADS1015IDGST
The Texas Instruments ADS1015IDGST is a 12-bit ADC with 4 analog in channels, operating at a sample rate of 0.0033 MHz. With a max linearity error of 0.0122%, it's ideal for automotive applications due to its small outline package and wide temperature range (-40 to 125 °C).
ADS1015IDGSR
The Texas Instruments ADS1015IDGSR is a 12-bit ADC with 4 analog input channels, operating at a sample rate of 0.0033 MHz. With a max linearity error of 0.0122%, it's ideal for automotive applications due to its small outline and thin profile package style. The converter type is delta-sigma, supporting a supply voltage range from 2V to 5.5V.
ADS1256IDBRG4
The Texas Instruments ADS1256IDBRG4 is a 24-bit ADC with 8 analog input channels, 0.001% max linearity error, and 0.03 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
ADS1148IPWR
The Texas Instruments ADS1148IPWR is a 16-bit ADC with 8 analog input channels, operating at a max conversion time of 0.002 us. Ideal for industrial applications, it offers a max linearity error of 0.0015%, operates at temperatures ranging from -40 to 105 °C, and supports supply voltages of 3.3V and 5V.
ADS1299-6PAGR
Texas Instruments ADS1299-6PAGR is a 24-bit ADC with 6 analog in channels, operating at 0.016 MHz sample rate. It features a 5V nominal voltage, -40 to 85°C temperature range, and quad terminal position. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package.
ADS124S08IPBS
Texas Instruments' ADS124S08IPBS is a 24-bit ADC with 12 analog in channels, operating from -50 to 125°C. It features a serial output format, quad terminal position, and automotive temperature grade suitability. Ideal for applications requiring precise analog-to-digital conversion in compact spaces.
ADS1112IDGST
ADS1112IDGST by Texas Instruments is a 16-bit ADC with 3 analog input channels. It operates at a supply voltage of 5V and has a max conversion time of 0.0041us. This ADC is commonly used in industrial applications for precise analog-to-digital conversion.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved