Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's T2030002025-000 is a CRIMP terminal for 14 AWG wire, rated at 16A. Designed for POWER AND SIGNAL applications, it features FEMALE contact gender and is made of COPPER ALLOY.
Median Price
$0.467
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.405
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.840
$0.608
$0.517
$0.484
TE Connectivity
$0.970
$0.820
Verical
$0.350
$0.336
$0.322
Master Electronics
$0.584
$0.506
$0.469
Powell Electronics
$0.384
Chip1Stop
$0.409
Nova Conductors
$0.338
TME
$0.810
$0.546
$0.464
$0.431
Vyrian
Electro Sonic
$0.874
$0.447
$0.401
IBS Electronics
$0.726
$0.613
$0.411
Bastille Electronics
$0.321
$0.305
$0.301
Perfect Parts
Assy Fe
EMSNET (Excess)
Allows for secure and reliable connections, perfect for assembly products.
Supports a standard wire size, ensuring compatibility with various applications.
Can accommodate larger wires for heavy-duty use, increasing versatility.
Provides ample electrical current capacity, suitable for high-power applications.
Ideal for connecting with male terminals, ensuring compatibility with a wide range of devices.
Combines power and signal transmission in one component, offering convenience and efficiency.
Offers excellent conductivity and durability, ensuring long-lasting performance.
Assembly Products T2030002025-000 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Contact Gender:
Design:
Material:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Digitron Semiconductors
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Itt Semiconductor
3200030
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;
2064600021
Molex
CONNECTOR ACCESSORY;
5054311000
Molex 5054311000 CONTACT features: Rated AC Voltage 50V, Rated Current 1.5A, Material COPPER ALLOY. Application: Ideal for assemblies requiring FEMALE contacts with STRAIGHT mounting and SQUARE PIN-SOCKET style. Accepts wire sizes from 30 AWG to 26 AWG.
1-104480-6
TE Connectivity 1-104480-6 is a CRIMP terminal with 300V rated voltage, suitable for DISCRETE WIRE cables. Featuring a contact resistance of 12 mohm, it has a max operating temperature of 105°C and is approved by CSA and UL for various applications in POWER AND SIGNAL designs.
160773-6
TE Connectivity 160773-6 is a CRIMP terminal with wire gauge 15 AWG, suitable for DISCRETE WIRE cables. It has a contact gender of FEMALE and mounting style STRAIGHT, made of BRASS material. Operating temperature ranges from -40 to 110 °C, with cable entry ranging from 0.09 to 0.13 inch.
5227
Keystone Electronics
WP-2S
Amphenol
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE;
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
5213
1-2308272-7
TE Connectivity's 1-2308272-7 cable clamp features shell sizes of 5, zinc alloy material, and screw mounting option. With shielding and a min cable entry of 0.256", it supports cables up to 0 AWG. Ideal for applications requiring secure cable management in environments with temperatures ranging from -40°C to 90°C.
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
W3P-1939
TE Connectivity's W3P-1939 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125°C, it supports up to 0 AWG wire size. Made of POLYBUTYLENE TEREPHTHALATE, it's ideal for various applications requiring robust electrical connections.
282465-1
TE Connectivity's 282465-1 cap housing features crimp terminal type, stamped contact design, and brass material. With a rated current of 14A and max operating temperature of 125°C, it is ideal for discrete wire cable types in applications requiring male contact gender and straight mounting style.
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
43375-0001
Molex 43375-0001 CONTACT features CRIMP terminal type, rated for 1000V AC/DC, with 18A current. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and BRASS material construction.
6648400-1
TE Connectivity 6648400-1 is a POWER female contact with SOLDER terminal type. It has a rated current of 75A, suitable for wire sizes up to 0 AWG. With operating temperatures from -55°C to 105°C, it is ideal for high-power applications requiring reliable connections.
13711542
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
206966-1
CONNECTOR ACCESSORY; Material: THERMOPLASTIC; Assembly Item Name: CLAMPING ITEM; Maximum Cable Entry: .453 inch;
50125-8000
The Molex 50125-8000 is a male contact assembly product with crimp terminal type. It is designed for use with the 51047 series housing, featuring a finish thickness of 35 and chain contact design. Ideal for wire sizes ranging from 28 to 26 AWG, it offers a straight mounting style and is made of phosphor bronze material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T2030011015-000
TE Connectivity's T2030011015-000 is a CRIMP terminal with 16 AWG wire gauge, rated for 16 A current. Designed for POWER AND SIGNAL applications, it features COPPER ALLOY construction and is ideal for MALE contacts.
T2030001008-000
TE Connectivity's T2030001008-000 is a CRIMP terminal with 18 AWG wire gauge, rated for 16A current. Designed for POWER AND SIGNAL applications, it features a COPPER ALLOY construction and is ideal for use in male contact gender assemblies.
T2030002005-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Design: POWER AND SIGNAL; Wire Gauge (AWG): 20; Terminal Type: CRIMP; Maximum Wire Size: 20 AWG;
T2030011025-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Maximum Wire Size: 14 AWG; Wire Gauge (AWG): 14; Design: POWER AND SIGNAL; Terminal Type: CRIMP;
T2030012015-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Design: POWER AND SIGNAL; Material: COPPER ALLOY; Contact Gender: FEMALE; Terminal Type: CRIMP;
T2030001002-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Design: POWER AND SIGNAL; Maximum Wire Size: 22 AWG; Minimum Wire Size: 26 AWG; Cross Section Area: .37 mm2;
T2030012008-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 18; Material: COPPER ALLOY; Design: POWER AND SIGNAL; Terminal Type: CRIMP;
T2030001005-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Terminal Type: CRIMP; Material: COPPER ALLOY; Wire Gauge (AWG): 20; Design: POWER AND SIGNAL;
T2030001010-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Design: POWER AND SIGNAL; Wire Gauge (AWG): 18; Contact Gender: MALE; Maximum Wire Size: 18 AWG;
T2030001015-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 16; Maximum Wire Size: 16 AWG; Terminal Type: CRIMP; Material: COPPER ALLOY;
T2030001030-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 12; Material: COPPER ALLOY; Contact Gender: MALE; Design: POWER AND SIGNAL;
T2030001040-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Material: COPPER ALLOY; Wire Gauge (AWG): 12; Design: POWER AND SIGNAL; Terminal Type: CRIMP;
T2030002008-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Material: COPPER ALLOY; Design: POWER AND SIGNAL; Wire Gauge (AWG): 18; Contact Gender: FEMALE;
T2030002010-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Contact Gender: FEMALE; Terminal Type: CRIMP; Material: COPPER ALLOY; Wire Gauge (AWG): 18;
T2030002015-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Material: COPPER ALLOY; Terminal Type: CRIMP; Design: POWER AND SIGNAL; Contact Gender: FEMALE;
T2030002030-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 12; Contact Gender: FEMALE; Design: POWER AND SIGNAL; Maximum Wire Size: 12 AWG;
T2030002040-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Terminal Type: CRIMP; Material: COPPER ALLOY; Design: POWER AND SIGNAL; Wire Gauge (AWG): 12;
T2030001025-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 14; Material: COPPER ALLOY; Contact Gender: MALE; Terminal Type: CRIMP;
T2030002002-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Wire Gauge (AWG): 22; Contact Gender: FEMALE; Material: COPPER ALLOY; Minimum Wire Size: 26 AWG;
T2030011002-000
CONNECTOR ACCESSORY; Rated Current: 16 A; Terminal Type: CRIMP; Design: POWER AND SIGNAL; Maximum Wire Size: 22 AWG; Wire Gauge (AWG): 22;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved