Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT04-08PA is a combination line connector with dimensions of 1.798" x 1.435" x 0.94". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications and has a max current rating of 13A.
Median Price
$3.400
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$2.098
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$2.455
$2.172
Mouser Electronics
$3.530
$2.260
$1.960
$1.910
TE Connectivity
$3.710
RS Americas
$3.750
$2.890
Farnell
$4.060
$2.930
$2.120
Element14
$6.010
$5.230
Newark
$6.120
$4.500
$4.250
TTI
$2.100
$2.010
Future Electronics
$1.840
$1.780
Master Electronics
$1.830
$1.730
$1.700
Verical
$2.296
$2.062
Boersig
TTI Europe
$1.977
$1.760
Distrelec
Heilind Electronics
Digiode
$1.824
Nova Conductors
$2.568
TME
$2.990
$2.080
CustomConnectorKits
$3.550
$3.180
$2.400
IBS Electronics
$2.792
$2.637
$2.594
NAC Semi
$3.800
Vyrian
EMSNET
Electro Sonic
$2.640
$2.310
$2.200
LJR Electronics
Lakeview Electronics
Extreme Components
Elcom Components
LIBRA Elektronik GmbH
Bristol Electronics
Semicontronic
$1.630
$1.589
$1.581
Corphita
$1.728
Argo Parts USA
$2.450
Advanced Electronics
$2.463
$2.340
Continental Prestige Electronics
$2.870
$2.300
Benley Electronics
$3.290
Aztec Data Supply Inc.
$4.760
Authorized Procurement Solutions
Perfect Parts
Kepictronics
ErreBi Group
EMSNET (Excess)
Resion (Excess)
The compact size of the body allows for easy installation in tight spaces while providing a secure connection.
The high voltage rating ensures safe and reliable operation for various electrical applications.
The use of glass-filled polyamide provides excellent insulation properties, making the connector durable and long-lasting.
With a high maximum operating temperature, this connector can withstand extreme conditions without sacrificing performance.
The high current rating allows for efficient transmission of signals without the risk of overheating or damage.
The round pin and socket contact style ensures a secure and reliable connection for optimal signal transmission.
The inclusion of a strain relief feature helps prevent damage to the cable connection, increasing the overall reliability of the product.
Combination Line Connectors DT04-08PA attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT04-08PA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DT0y- Housing chg 06/APR/2021 Material Change 18/JAN/2023
PCN Assembly/Origin - Molding process chg 30/AUG/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
EU2B-YS3303C
Idec
ROTARY SWITCH;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
EU2B-YS2J03F
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
4-1564526-1
TE Connectivity's 4-1564526-1 is a Combination Line Connector with dimensions of 2.461" x 1.567" x 1.854". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140 °C. Ideal for applications requiring a polarized, UL-rated connector with 18 contacts and a current rating of 20A.
174352-2
TE Connectivity's 174352-2 is a Combination Line Connector with dimensions of 1.087" x 0.811" x 0.898". Rated for 12V, it operates b/w -30°C to 105°C. With UL certification, it features a polarized housing and is ideal for cable mounting applications.
AT04-2P-KIT01
Amphenol
The Amphenol AT04-2P-KIT01 is a Combination Line Connector with 2 contacts, rated at 13A. It features a POLYETHYLENE insulator and operates b/w -55 to 125°C. Ideal for cable mounting applications, this connector has a male contact gender and crimp termination type.
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
HVSL800082A150
Amphenol's HVSL800082A150 is a 3.185" x 3.724" x 2.35" Combination Line Connector with POLYETHYLENE insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features a male RND PIN-SKT contact style. Ideal for cable mounting applications requiring reliable crimp termination.
DT04-6P-C015
TE Connectivity's DT04-6P-C015 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DT06-12SC-P012
TE Connectivity's DT06-12SC-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, crimped female plug with strain relief mounting on cables.
12162210
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: 1.066 inch; Total No. of Contacts: 6; Filter Feature: NO;
DT06-6S-P012
TE Connectivity's DT06-6S-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized plug has UL certification and measures 1.218" x 0.716" x 0.891".
MX23A34NF1
Japan Aviation Electronics Industry
MX23A34NF1 by Japan Aviation Electronics is a Combination Line Connector with dimensions 2.283" x 0.72" x 1.507". It features 34 contacts made of brass with TIN finish, suitable for board mounting and waterproof applications. The insulator material is glass filled polybutylene terephthalate, making it durable and reliable for various electronic connections.
DT06-08SA-CE10
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
350209-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; IEC Conformity: NO; Termination Contact Finish: TIN;
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
12065402
Aptiv
Aptiv's 12065402 is a Combination Line Connector with dimensions of 0.964" x 0.791" x 1.023". It features 2 female SQ PIN-SKT contacts and is ideal for automotive applications.
12015798
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Insulator Material: POLYAMIDE6; Total No. of Contacts: 4;
SMS3P3
Souriau-sunbank Connection Technologies
SMS3P3 by Souriau-sunbank is a 0.232" wide, 0.984" deep combination line connector with 3 contacts rated at 7.5A. Made of glass-filled polyethylene, it's a female plug for cable mounting with crimp termination. Ideal for applications requiring UL94V-0 flammability code compliance and compact design.
DTM04-6P-EE04
TE Connectivity's DTM04-6P-EE04, a Combination Line Connector, features 6 contacts with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
2-2141227-2
TE Connectivity's 2-2141227-2 is a EMI shielded combination line connector with rated current of 45A. It operates b/w -40 to 140°C, featuring solder termination and male contact gender. Ideal for panel mounting applications with terminal pitch of 11.5mm and straight mounting style.
ATP06-2S
The Amphenol ATP06-2S is a combination line connector with Polyethylene insulator, rated for 25A signal current. It operates b/w -55°C to 125°C, featuring a plug shell style and crimp termination. Ideal for cable mounting applications requiring a female contact gender with two contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-CE03
TE Connectivity's DT04-2P-CE03 is a 1.818" x 0.675" x 0.67" Combination Line Connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male receptacle connector with strain relief option.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DT04-6P
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DT04-6P-CL09
TE Connectivity's DT04-6P-CL09 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a 13A signal current, this UL-rated connector features crimp termination and polarization key for secure connections.
DT04-3P
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
DT04-2P-RT01
TE Connectivity's DT04-2P-RT01 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a single receptacle connector with strain relief option.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
DT04-4P-C015
TE Connectivity's DT04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-6P-CE02
TE Connectivity's DT04-6P-CE02 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a polarized, crimp termination male connector with strain relief mounting option.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved