Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 9-146278-0 is a board connector with Tin-Nickel finish, operating from -65 to 105°C. With 40 contacts on a 2.54mm pitch, it's rated for 3A signal current and UL94V-0 flammability. Ideal for applications requiring high reliability in harsh environments.
Median Price
$3.397
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.914
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$1.050
RS Americas
$1.060
Arrow
$1.644
Element14
$3.008
$2.211
$1.869
$1.809
Farnell
$3.124
$1.846
$1.807
Interstate Connecting
$4.597
$3.853
$3.639
Heilind Electronics
$4.944
$4.031
$3.911
Mouser Electronics
$5.600
$3.940
$3.660
$3.570
TE Connectivity
$5.920
$5.390
$4.990
$4.860
Newark
$6.320
$4.470
$4.010
Powell Electronics
$6.769
$4.534
DigiKey
$7.680
$5.546
$4.715
TTI
$1.290
Verical
Future Electronics
$2.870
$2.780
Master Electronics
$3.670
$3.160
$3.120
Avnet
Digiode
$0.868
Nova Conductors
$1.890
DF Sales Co.
$2.769
VNN
IBS Electronics
$5.147
$4.432
$4.376
Vyrian
NAC Semi
$2.830
Electro Sonic
$2.000
$1.760
$1.680
TME
$6.739
$5.712
QIE Inc.
Florida Circuit
Semicontronic
$0.780
$0.760
$0.757
Corphita
$0.823
Continental Prestige Electronics
$1.852
Argo Parts USA
Aztec Data Supply Inc.
$6.760
Perfect Parts
Assy Fe
Provides excellent corrosion resistance and ensures a reliable connection over time.
Offers high strength, heat resistance, and dimensional stability, making the product durable and reliable.
Can withstand high temperatures, increasing the versatility of the product in various applications.
Can operate in extremely low temperatures, ensuring reliable performance in a wide range of environments.
Ensures a robust coating that enhances conductivity and durability of the connectors.
Specifically designed for board connections, ensuring a secure and proper fit.
Meets stringent safety standards, providing peace of mind in terms of fire safety.
Can handle a decent current, suitable for various signal transmission requirements.
Offers a professional and sleek appearance in the overall design of the product.
Provides ample connectivity options for a wide range of applications.
Simplifies the installation process, ensuring ease of use and compatibility with other equipment.
Designed for easy and secure mounting on a board, ensuring stability.
Standard pitch size for compatibility and ease of connection with other components.
Suitable for various power requirements, ensuring compatibility with different devices.
Reliable and durable termination method, ensuring a strong electrical connection.
Compatible with female connectors, providing versatility in connectivity options.
Simplifies installation and ensures a proper alignment for efficient connectivity.
Standard terminal length for compatibility with various devices and connections.
Headers & Edge Type Connectors 9-146278-0 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
9-146278-0 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Silicon Transistor
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Nexperia
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
78171-0004
Molex
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
22-27-2061
The Molex 22-27-2061 is a board connector with 6 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
3674
Lumberg Connect
3674 by Lumberg Connect is a BOARD CONNECTOR with 25 contacts, Tin (Sn) finish. It has a Terminal Pitch of 5mm and UL Flammability Code of 94V-0. Ideal for applications requiring RIGHT ANGLE mounting in Headers & Edge Type Connectors.
52559-2052
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
B06B-PASK-1(LF)(SN)
J S T Mfg
B06B-PASK-1(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for applications requiring a rated current of 3A. Featuring a dielectric voltage of 800VAC and insulation resistance of 1Gohm, it has a temperature range from -25 to 85°C, making it ideal for various electronic devices.
B4B-XH-A-GU
B4B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
DTM06-2S-E007
TE Connectivity DTM06-2S-E007 is a 1.47" x 0.569" x 0.508" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It has 2 contacts, UL 94V-0 flammability code, and supports up to 7.5A signal current. Ideal for cable mounting applications requiring polarized housing and strain relief.
MTCB1X-106-XXXCS025
BOARD CONNECTOR;
1-1658622-1
TE Connectivity 1-1658622-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it uses polyethylene insulation and operates b/w -65 to 105°C. Ideal for ribbon cable applications, it offers durability up to 150 cycles and polarization key for secure connections.
66506-313LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
51021-0400
The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.
2-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; IEC Conformity: NO; Mixed Contacts: NO;
14-45-0222
Molex 14-45-0222 is a 22-contact board connector with 0.1" pitch, TIN over nickel finish, and glass-filled polyester insulator. It operates b/w -40 to 105°C, rated for 3A signal current, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable male connectors with IDC termination in black color.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
DM3AT-SF-PEJM5
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5 is a card edge connector with 8 contacts, gold termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.043", withstands up to 500VAC, and operates b/w -25°C to 85°C. Ideal for board mounting applications in commercial settings with durability up to 10,000 cycles.
22-16-2070
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
DT06-3S-P006
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
B2P-VH-BK(LF)(SN)
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
DTM04-12PA
TE Connectivity's DTM04-12PA is a 2-row board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. With dimensions of 1.72" x 0.796" x 1.575", it operates b/w -55°C to 125°C, suitable for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
776286-1
TE Connectivity's 776286-1 is a 3-row board connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a max operating temp of 125°C, -40°C min temp, and rated current of 17A. Ideal for cable mounting applications requiring a polarized, UL-rated female plug with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
9-146281-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
9-146280-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
TE Connectivity 9-146280-0 is a board connector with 40 contacts, mating pitch of 0.1", and insulation resistance of 5G ohm. It has a max operating temperature of 105°C and is used in commercial applications requiring a rated current of 3A.
9-146276-0
TE Connectivity 9-146276-0 is a board connector with 40 contacts, mating pitch of 0.1", and matte tin finish. Ideal for commercial applications, it has a temperature range of -65 to 105°C and UL94V-0 flammability rating.
9-146304-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
9-146285-0
TE Connectivity 9-146285-0 is a board connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, rated for 3A signal current. Operating b/w -65 to 105 °C, it has 40 contacts on a 2.54mm pitch suitable for various applications requiring high temperature resistance and reliable connections.
9-146256-0
TE Connectivity 9-146256-0 is a board connector with 80 contacts, 2 rows, and 3A signal current rating. Featuring matte tin finish, it has a mating contact pitch of 0.1 inch and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular patterns.
9-146305-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.1;
9-146252-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
9-146282-0
TE Connectivity 9-146282-0 is a board connector with 40 contacts and a terminal pitch of 2.54mm. It has a max operating temperature of 105°C and is suitable for applications requiring a rated current of 3A, such as in electronic devices or industrial equipment.
9-146253-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO;
9-146277-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 1;
9-146254-0
TE Connectivity's 9-146254-0 is a board connector with 80 contacts, rated at 3A for signal current. It features tin termination with nickel barrier, polyethylene insulator, and operates b/w -65 to 105°C. Ideal for applications requiring a straight male connector with solder termination.
9-146274-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105; Mixed Contacts: NO;
9-146273-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: CSA, LR, U; UL Flammability Code: 94V-0;
9-146279-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mains Connector Rating: 3A; Terminal Pitch (mm): 2.54;
9-146272-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Row Spacing (inch): 0.1;
9-146270-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO; Mounting Type: BOARD;
9-146289-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO; Mounting Type: BOARD;
9-146286-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 2.54;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved