Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 826632-3: Headers & Edge Type Connectors with 0.1" pitch, 5A signal current rating, and -65 to 105°C operating temperature range. Ideal for board connections in commercial applications requiring durable male receptacles with solder termination.
Median Price
$0.788
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.670
100+ parts
-
1k+ parts
$0.561
10k+ parts
Heilind Electronics
$0.720
$0.587
Mouser Electronics
$0.900
$0.752
$0.664
$0.616
Element14
$0.985
$0.730
$0.698
$0.645
TE Connectivity
$1.050
$0.940
$0.860
Newark
$1.080
$0.879
$0.745
DigiKey
$1.200
$0.868
$0.775
$0.658
Chip1Stop
$1.280
Bürklin Elektronik
$1.500
$1.020
TTI Europe
$0.515
$0.446
Future Electronics
$0.450
Master Electronics
$0.711
$0.624
$0.487
Verical
$0.765
$0.734
Powell Electronics
$0.810
$0.690
$0.640
Distrelec
Farnell
$0.622
TTI
$0.509
Vyrian
$0.440
Nova Conductors
$0.575
Digiode
$0.684
Component Electronics Inc.
$0.770
$0.580
$0.500
ComSIT Distribution GmbH
VNN
IBS Electronics
$1.007
$0.694
$0.654
NAC Semi
$0.846
Electro Sonic
$0.629
$0.494
J2 Sourcing AB
A&K Electronics
Rotakorn
Bristol Electronics
Prism Electronics
Rapid Electronics
$0.667
Semicontronic
$0.374
$0.365
$0.363
Netroflash
$0.546
$0.535
Argo Parts USA
$0.558
Corphita
$0.648
Continental Prestige Electronics
$0.857
$0.537
$0.406
Aztec Data Supply Inc.
$7.788
Advanced Electronics
$11.806
$10.743
$9.681
Perfect Parts
Authorized Procurement Solutions
Eastek
$0.530
Abacus Technologies
Assy Fe
GreenTree Electronics
Computer Components Inc. - USA
Having a small mating contact pitch allows for high-density connections on the board, making this connector suitable for applications requiring a compact design.
The compact body length of the connector helps save space on the board and is ideal for applications where space is limited.
With a high insulation resistance, this connector ensures reliable and stable electrical connections, reducing the risk of short circuits.
The insulator material used in this connector is known for its durability and resistance to heat, making the connector suitable for a wide range of operating temperatures.
This connector is capable of handling a rated current of 5 A for signal transmission, making it suitable for applications requiring moderate power delivery.
Headers & Edge Type Connectors 826632-3 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
826632-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 826629 Tolerance 22/Jan/2019 AMPMODU II Pin Headers Material 07/Apr/2014
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Cheng-yi Electronic
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Leshan Radio
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Daco Semiconductor
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MTSW-102-07-G-S-240
Samtec
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
53048-0610
Molex
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
XHP-4-BK
J S T Mfg
XHP-4-BK by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
TSW-106-07-G-S
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
HTSW-104-07-G-S
Samtec's HTSW-104-07-G-S is a 4-contact board connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and operates b/w -55°C to 125°C. Ideal for commercial applications, this header connector has a solder termination type and UL94V-0 flammability rating.
22-01-2027
Molex 22-01-2027 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a body length of 0.222", insulation resistance of 1000000000 ohm, and operating temperature range from -40 to 105 °C, it offers reliable performance in various commercial applications requiring a durable and high-quality female contact design.
504077-1891
Molex 504077-1891 is a PCB connector with 0.043" contact pitch, 8u plating thickness, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features liquid crystal polymer insulator material and operates b/w -40 to 85 °C.
2-640456-5
TE Connectivity 2-640456-5 is a 25-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a 5A signal current rating and rectangular contact pattern.
75869-104LF
Amphenol Communications Solutions
75869-104LF by Amphenol is a 20-contact board connector with 0.1" pitch, suitable for commercial applications. It features 1414VAC dielectric voltage, -65 to 125°C operating temp range, and matte tin over nickel finish. Ideal for PCBs requiring reliable male connectors with rectangular contact pattern.
MEC1-130-02-F-D-RA1-SL
Samtec's MEC1-130-02-F-D-RA1-SL is a 2-row, 60-contact card edge connector with a mating contact pitch of 0.039". It features tin termination finish and gold flash over nickel mating finish. Ideal for commercial applications requiring a right-angle, surface-mount female socket connector on PCBs.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
22-01-3067
The Molex 22-01-3067 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.622 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 700VAC. This connector is commonly used in commercial applications due to its durability, removable contact block design, and polarization key feature.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
357-074-422-278
Edac
Edac 357-074-422-278 is a Card Edge Connector with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance and UL certification.
FTSH-105-01-L-DV-K
Samtec's FTSH-105-01-L-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
FTSH-110-01-L-DV-K-A-P-TR
The Samtec FTSH-110-01-L-DV-K-A-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and gold mating contact finish. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
29-08-05WB-MG
3m Electronic Products Division
29-08-05WB-MG by 3m Electronic Products Division is a PCB connector with 8 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.043", operates b/w -25 to 85°C, and withstands up to 500VAC. Ideal for commercial applications requiring reliable right-angle surface mount connections.
50-57-9408
The Molex 50-57-9408 is a board connector with a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and rated current of 3A. It is used in applications requiring a female connector with crimp termination, suitable for commercial reliability standards.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
826629-2
TE Connectivity 826629-2 is a board connector with 0.1" pitch, suitable for commercial applications. It features tin finish, 5A signal current rating, and operates b/w -65 to 105°C. Ideal for use in electronics requiring a male square pin socket contact style on a rectangular PCB pattern.
826631-4
TE Connectivity 826631-4 is a board connector with mating contact pitch of 0.1". It has insulation resistance of 5G ohm, operating temperature range from -65 to 105°C, and rated current of 5A. This male connector with right angle mounting is suitable for commercial applications requiring reliable signal transmission.
826634-3
TE Connectivity 826634-3 is a 2-row board connector with 0.1" contact pitch, suitable for commercial applications. With insulation resistance of 5G ohm and operating temperature range from -65 to 105°C, it features POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for PCB mounting with right-angle plug style, rated at 5A signal current.
826632-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: NO; Mixed Contacts: NO;
826629-5
TE Connectivity 826629-5 is a 0.1" pitch header connector with 5A signal rating, suitable for board mounting. With POLYBUTYLENE TEREPHTHALATE insulator and UL94V-0 flammability code, it operates b/w -65 to 105 °C. Ideal for commercial applications requiring reliable male connectors with solder termination.
826629-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .126 inch;
826634-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
826629-3
TE Connectivity 826629-3 is a board connector with 0.1" pitch, suitable for commercial applications. With insulation resistance of 5G ohm, it operates b/w -65 to 105°C and supports 5A signal current. The male connector has a solder termination type and green insulator color, meeting UL standards.
826629-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 5 A;
826656-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; Rated Current - Signal: 5 A;
826656-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -65 Cel; Terminal Length: .126 inch;
826632-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Reference Standard: UL;
826648-8
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Insulation Resistance: 5000000000 ohm;
826662-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Terminal Length: .126 inch;
826632-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54; DIN Conformance: NO;
826632-8
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
826656-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.54;
826646-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
826629-8
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
826634-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved