Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF40C-100DP-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" pitch, 100VAC dielectric voltage, and gold termination finish. Ideal for PCB applications requiring a durable, polarized male plug with liquid crystal polymer insulator material. Operating temperature range from -35 to 85°C makes it suitable for commercial use in various electronic devices.
Median Price
$1.162
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.760
100+ parts
$1.270
1k+ parts
$1.140
10k+ parts
$1.100
Newark
$2.160
$1.680
$1.400
$1.360
Element14
$2.310
-
$1.440
$1.420
DigiKey
$1.071
Avnet
Chip1Stop
$1.160
$0.999
$0.858
Master Electronics
$1.050
Verical
$1.311
$1.254
Interstate Connecting
$0.945
Nova Conductors
$0.994
TME
$1.660
$1.180
$1.020
NAC Semi
$1.070
Chip Stock
Vyrian
IBS Electronics
$1.314
$1.219
Electro Sonic
$1.092
$0.986
Netsource Technology, Inc.
Prism Electronics
Elcom Components
Corohmni
$0.965
Aranea Global
$0.975
$0.936
Advanced Electronics
$0.944
Argo Parts USA
Continental Prestige Electronics
$1.010
$0.973
$0.794
Semicontronic
$1.490
$1.453
$1.445
Aztec Data Supply Inc.
$2.300
Microchip USA
$11.380
$11.310
$11.270
$11.240
Perfect Parts
GreenTree Electronics
Kepictronics
Glotronic Ltd.
Lixinc
EMSNET (Excess)
Eastek
$0.790
Abacus Technologies
Authorized Procurement Solutions
Lucentia Tech
$0.038
The close pitch allows for a high density of contacts, making this connector suitable for applications requiring many connections in a limited space.
High insulation resistance ensures minimal leakage of current between contacts, enhancing the reliability of the connection.
The high dielectric voltage rating ensures that this connector can withstand voltage spikes or surges, making it suitable for a variety of electronic applications.
Gold plating offers excellent conductivity and corrosion resistance, ensuring reliable and durable connections over time.
The high rated current allows for the transmission of higher power signals, making this connector suitable for applications requiring efficient signal transmission.
With a high durability rating, this connector can withstand multiple insertion and extraction cycles without compromising on performance or reliability.
The board mounting option facilitates easy installation on PCBs, providing a secure and stable connection for electronic components.
The commercial-grade reliability ensures consistent performance and durability, making this connector a reliable choice for various commercial applications.
Headers & Edge Type Connectors DF40C-100DP-0.4V(51) attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DF40C-100DP-0.4V(51) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Cheng-yi Electronic
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Surge Components
Weitron Technology
Microsemi
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
B4B-XH-A
J S T Mfg
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
USL00-30L-A
Kel
The Kel USL00-30L-A is a 30-contact board connector with a mating contact pitch of 0.016". It features an insulation resistance of 100M ohm and can withstand up to 200VAC. Ideal for commercial applications, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.
823-22-012-10-000101
Mill-max Mfg
823-22-012-10-000101 by Mill-max Mfg is a 12-contact board stacking connector with gold over nickel finish. Featuring 2 rows, 2.54mm terminal pitch, and UL94V-0 flammability rating, it's ideal for board applications requiring reliable male contacts in straight mounting style.
53261-0771
Molex
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
B02B-PASK-1(LF)(SN)
B02B-PASK-1(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.079" pitch, suitable for PCB mounting with 800VAC dielectric voltage. Featuring glass-filled polybutylene terephthalate insulation and copper alloy contacts, it operates b/w -25 to 85°C, making it ideal for signal applications requiring up to 3A current.
324-91-161-41-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;
FTSH-105-01-F-D-K
Samtec
Samtec's FTSH-105-01-F-D-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
39-53-2084
Molex 39-53-2084 FFC/FPC connector with 8 contacts, 2 rows, and 0.049" pitch. POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for board mounting in commercial applications requiring a reliable right-angle connection.
VHR-2N-Y
BOARD CONNECTOR;
B2PS-VH-R(LF)(SN)
B2PS-VH-R(LF)(SN) by J S T Mfg is a 10A BOARD CONNECTOR with 0.156" pitch, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. Ideal for PCBs with RECTANGULAR contact pattern, it offers high insulation resistance of 1Gohm and operates b/w -25 to 85°C.
B3B-PH-SM4-TB(LF)(SN)
B3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male contact style, surface mount termination, and a total of 3 contacts on a rectangular PCB pattern.
22-10-2021
Molex 22-10-2021 header connector features 0.1" pitch, 0.19" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with a temperature range of 0-75°C. Male contact pins with matte tin finish over nickel for durability and reliability in PCB mounting.
DF40C-100DS-0.4V(57)
Hirose Electric
DF40C-100DS-0.4V(57) by Hirose Electric is a 2-row, 100-contact board stacking connector with liquid crystal polymer insulator. Featuring 0.016" mating contact pitch and 100VAC dielectric voltage, it operates b/w -35°C to 85°C. Ideal for applications requiring high durability and signal current of 0.3A, such as PCB connections in electronics industry.
DF11-20DP-2DS(52)
DF11-20DP-2DS(52) by Hirose Electric is a 20-contact board connector with 0.079" pitch, suitable for commercial applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for PCB mounting with solder termination and right-angle style.
DF11-4DS-2C
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
DT04-3P-E003
TE Connectivity
TE Connectivity's DT04-3P-E003 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. With a UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with strain relief mounting.
HTSW-102-07-G-S
Samtec's HTSW-102-07-G-S header connector features a 0.1" contact pitch, gold over nickel termination finish, and liquid crystal polymer insulator. With a temperature range of -55 to 125°C, it is ideal for board-to-board connections in commercial applications requiring high reliability.
2-1761608-3
TE Connectivity 2-1761608-3 is a board connector with 10 contacts, dual polarization, and solder termination. It has a mating contact pitch of 0.1 inch and operates b/w -65 to 105 °C. Ideal for commercial applications requiring a reliable male plug with straight mounting and blue insulator color.
B06B-PASK(LF)(SN)
B06B-PASK(LF)(SN) by J S T Mfg is a board connector with 6 contacts, 0.079" pitch, and 800VAC dielectric voltage. It features TIN finish, UL standard, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring male connectors with press fit termination and rectangular contact pattern.
FTSH-105-01-F-DV-K-A-P-TR
Samtec's FTSH-105-01-F-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts plated with gold flash over nickel for signal currents up to 3.4A. Ideal for commercial applications requiring reliable surface mount connections at temperatures ranging from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF40C-100DS-0.4V(51)
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
DF40HC(3.0)-100DS-0.4V(51)
DF40HC(3.0)-100DS-0.4V(51) by Hirose Electric is a 2-row stacking connector with 100 contacts, gold-plated for durability and signal current up to 0.3A. Featuring liquid crystal polymer insulation, it offers high dielectric voltage of 100VAC and operates b/w -35°C to 85°C. Ideal for board mounting applications requiring reliable female connectors with bellowed contact style and locking option.
DF40C-90DS-0.4V(51)
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
DF40HC(3.0)-100DS-0.4V(58)
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
DF40C-100DS-0.4V(58)
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
DF40C-80DP-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
DF40C-100DS-0.4V
DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.
DF40C-60DP-0.4V(51)
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
DF40HC(4.0)-80DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
DF40C-30DP-0.4V(51)
DF40C-30DP-0.4V(51) by Hirose Electric is a 30-contact male plug connector with 0.016" pitch, 100VAC voltage rating, and 85°C max operating temp. Ideal for board stacking applications, featuring liquid crystal polymer insulator material and tin termination finish.
DF40C-40DP-0.4V(51)
DF40C-40DP-0.4V(51) by Hirose Electric is a 2-row, 40-contact board stacking connector with 0.016" pitch and 100VAC dielectric voltage. Ideal for PCB applications, it features liquid crystal polymer insulation, tin termination finish, and a polarization key for secure connections in commercial environments.
DF40C-20DP-0.4V(51)
DF40C-20DP-0.4V(51) by Hirose Electric is a 20-contact male plug connector with 0.016" pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for board stacking applications, it features liquid crystal polymer insulator, tin termination finish, and operates b/w -35 to 85°C.
DF40C-40DS-0.4V(51)
DF40C-40DS-0.4V(51) by Hirose Electric is a 2-row, 40-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it has a mating contact pitch of 0.016" and dielectric voltage of 100VAC. Ideal for PCB applications requiring durability, reliability, and signal current rating of 0.3A in commercial settings.
DF40HC(4.0)-60DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Mixed Contacts: NO;
DF40HB(2.5)-10DS-0.4V(51)
DF40HB(2.5)-10DS-0.4V(51) by Hirose Electric is a 10-contact board stacking connector with gold termination, LCP insulator, and 100VAC dielectric voltage rating. It has a mating pitch of 0.016", -35 to 85°C operating temp range, and UL94V-0 flammability rating. Ideal for applications requiring durable female connectors with surface mount termination in black color.
DF40C-20DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
DF40C(2.0)-40DS-0.4V(51)
DF40HC(3.0)-70DS-0.4V(51)
DF40HC(3.0)-70DS-0.4V(51) by Hirose Electric is a board stacking connector with a mating contact pitch of 0.016 inches and a body length of 0.654 inches. It has an insulation resistance of 50M ohm and can withstand a dielectric voltage of 100VAC. This connector is commonly used in commercial applications that require reliable and durable connections on PCBs.
DF40C-100DS-0.4V(70)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Contact Resistance: 90 mohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved