Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF40HC(3.0)-70DS-0.4V(51) by Hirose Electric is a board stacking connector with a mating contact pitch of 0.016 inches and a body length of 0.654 inches. It has an insulation resistance of 50M ohm and can withstand a dielectric voltage of 100VAC. This connector is commonly used in commercial applications that require reliable and durable connections on PCBs.
Median Price
$2.280
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.645
1k+ parts
$1.423
10k+ parts
-
Element14
$2.470
$1.928
$1.379
$1.313
Newark
$2.660
$2.100
$1.910
Mouser Electronics
$2.840
$2.060
$1.780
$1.660
Farnell
$2.905
$1.825
Future Electronics
$1.450
Chip1Stop
$1.440
$1.170
$1.000
Verical
$1.393
$1.202
Avnet
$1.568
Nova Conductors
$1.212
Maritex
$1.678
$0.922
$0.638
Component Sense
IBS Electronics
$2.045
NAC Semi
$2.900
Chip Stock
Contempo Components LLC
Vyrian
SPM Sales
South Electronics
Semicontronic
$0.980
$0.956
$0.951
Ampacity Inc.
Argo Parts USA
Corohmni
$2.771
Continental Prestige Electronics
$2.922
$2.279
Aztec Data Supply Inc.
$10.550
GreenTree Electronics
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Formix International (Excess)
Perfect Parts
Eastek
$1.080
Futuretech Components
Netroflash
$1.188
$1.151
$1.127
0.016 inch - This small pitch allows for high-density connections, making it ideal for compact electronic devices.
0.654 inch - The substantial body length provides a secure connection while offering flexibility in mounting options.
50000000 ohm - With a high insulation resistance, this connector ensures reliable and consistent electrical performance, reducing the risk of signal interference.
0.133 inch - The slim body width allows for space-saving installations, which is particularly advantageous in crowded circuit boards.
100VAC - The connector can withstand high voltage levels, making it suitable for various applications and ensuring safety in electrical systems.
Gold (Au) - The gold termination contact finish enhances conductivity, corrosion resistance, and durability, ensuring excellent signal transmission and a long lifespan.
0.114 inch - The compact body depth contributes to overall space-saving design, making it efficient for utilization in limited spaces.
LIQUID CRYSTAL POLYMER - The use of liquid crystal polymer as the insulator material ensures high temperature resistance, mechanical strength, and excellent dielectric properties for enhanced reliability.
2 - Having two rows loaded allows for increased connectivity options and versatility in connecting multiple devices.
85 °C - The connector is designed to withstand high operating temperatures, making it suitable for various environments and applications.
2.38 mm - The precise PCB contact row spacing enables easy and accurate PCB assembly, contributing to efficient manufacturing processes.
35 °C - The connector's capability to operate in low-temperature environments ensures reliable performance in a wide range of conditions.
1.969u inch - The plating thickness ensures reliable and long-lasting connections, reducing the risk of oxidation and signal loss.
2 - This connector has two PCB rows, offering increased connectivity options and flexibility in circuit board design and layout.
BOARD STACKING CONNECTOR - The board stacking connector facilitates the stacking of multiple circuit boards, enabling efficient and space-saving assembly in complex electronic systems.
94V-0 - This connector has a high flammability rating, ensuring safety and compliance with industry standards.
POLARIZED HOUSING - The polarization key in the housing allows for proper orientation during mating, preventing misconnections and ensuring secure and reliable connections.
0.3 A - With a rated current of 0.3 A, this connector can handle moderate current loads, making it suitable for signal transmission applications.
BLACK - The black insulator color provides a visually appealing and aesthetically pleasing design option for various electronic devices.
UL - The connector conforms to UL standards, ensuring quality, safety, and reliable performance.
70 - With 70 contacts, this connector provides extensive connectivity options, making it suitable for connecting multiple components or systems.
ONE - This product consists of a single connector, ensuring simplicity and ease of installation.
30 Cycles - The connector's durability of 30 cycles ensures reliability and longevity, making it suitable for applications that require frequent mating and unmating.
BOARD - The board mounting type allows direct installation onto circuit boards, simplifying assembly processes and ensuring secure connections.
0.4 mm - With a small terminal pitch, this connector enables high-density connections, making it suitable for miniaturized electronic devices.
MULTIPLE MATING PARTS ARE AVAILABLE - The availability of multiple mating parts offers versatility and compatibility, allowing for various connectivity configurations and system expansions.
RECTANGULAR - The rectangular PCB contact pattern ensures precise and secure connections, minimizing the risk of misalignment and signal loss.
SURFACE MOUNT - The surface mount termination type allows for efficient and reliable soldering to the circuit board, enabling streamlined manufacturing processes.
FEMALE - The female contact gender enables proper mating with compatible male connectors, ensuring a secure and reliable connection.
90 mohm - The low contact resistance of 90 mohm ensures efficient signal transmission and minimizes signal loss, resulting in high-quality connections.
RECEPTACLE - This connector is designed as a receptacle, allowing for easy insertion and removal of compatible plugs or male connectors.
STRAIGHT - The straight mounting style offers simplicity and ease of installation, making it suitable for straightforward assembly processes.
BELLOWED TYPE - The bellows-style contact enhances the connector's durability and reliability by providing additional protection against environmental factors such as dust, moisture, and mechanical stress.
LOCKING - The locking mounting option ensures secure and stable connections, preventing accidental disconnections and maintaining signal integrity.
RECTANGULAR - The rectangular contact pattern simplifies alignment and ensures proper mating, facilitating quick and reliable connections.
COMMERCIAL - The commercial-level reliability ensures consistent and dependable performance in various applications and environments.
Headers & Edge Type Connectors DF40HC(3.0)-70DS-0.4V(51) attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DF40HC(3.0)-70DS-0.4V(51) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
39-53-2145
Molex
Molex 39-53-2145 FFC/FPC connector with 14 contacts, 0.049" pitch, and 0.915" body length. Ideal for PCB applications requiring a 1.25mm terminal pitch and staggered contact pattern. Features polyester insulator material, UL94V-0 flammability code, and solder termination for reliable commercial use.
B06B-PASK(LF)(SN)
J S T Mfg
B06B-PASK(LF)(SN) by J S T Mfg is a board connector with 6 contacts, 0.079" pitch, and 800VAC dielectric voltage. It features TIN finish, UL standard, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring male connectors with press fit termination and rectangular contact pattern.
90151-2114
The Molex 90151-2114 is a board connector with 14 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates in temperatures ranging from -55 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
746-068-520-601
Edac
Edac 746-068-520-601 is a 68-contact card edge connector with 0.125" pitch, suitable for PCB mounting. It features a dielectric voltage of 1500VAC, insulation resistance of 5Gohm, and operating temperatures from -40 to 105°C. Ideal for applications requiring high current signal transmission in black insulator color with UL94V-0 flammability rating.
DT04-2P-E008
TE Connectivity
TE Connectivity's DT04-2P-E008 is a 2.251" x 0.675" x 0.67" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.
B5B-PH-SM4-TB(LF)(SN)
B5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Features include POLYAMIDE66 insulator, 800VAC dielectric voltage, and TIN (Sn) finish over COPPER contacts. Ideal for PCB mounting with RECTANGULAR contact pattern and WHITE insulator color.
71918-120LF
Amphenol Communications Solutions
71918-120LF by Amphenol is a 20-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring a 2-row PCB layout and UL-rated insulation material, it offers a rated current of 3A and operates b/w -65°C to 125°C temperature range.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
1-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 2.54; Mating Contact Finish: NOT SPECIFIED;
S3B-PH-K-S(LF)(SN)
S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.
66506-354
Amphenol's 66506-354 is a 40-contact, 2-row board connector with a terminal pitch of 2.54mm. Featuring UL94V-0 flammability rating, it is ideal for applications requiring male solder contacts in straight mounting style.
2-1761603-5
TE Connectivity 2-1761603-5 is a dual-row board connector with 14 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with solder termination in blue color.
09-50-3041
Molex 09-50-3041 is a board connector with 0.156" mating pitch, 0.62"x.25"x.625" body dimensions, and POLYAMIDE insulator material. It has 4 contacts, FEMALE gender, PLUG shell style, and CRIMP termination type for CABLE mounting applications in commercial settings.
TFSD-20-28C-H-34.00-S
Samtec
Samtec's TFSD-20-28C-H-34.00-S is a 2-row, 40-contact board connector with female contacts for cable mounting. It features crimp termination and socket body style, ideal for high-density applications in electronics and telecommunications industries.
22-27-2021
Molex 22-27-2021 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts with matte tin finish, it offers high durability with 25 cycles and insulation resistance of 1000000000 ohm. With a temperature range of 0-75°C, this white connector has a total of 2 contacts and is UL and CSA certified.
502351-0800
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
S6B-ZR-SM4A-TF(LF)(SN)
S6B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a 6-contact board connector with mating pitch of 0.059", body width of 0.146", and termination finish of Tin over Copper. It is used in applications requiring surface mount connectors with male contact gender, right angle mounting style, and operating temperatures ranging from -25 to 85°C.
76384-302LF
76384-302LF by Amphenol is a board connector with 0.1" contact pitch, suitable for commercial applications. It features matte tin over nickel termination finish, gold mating contacts, and glass-filled polyethylene insulator material. With a rated current of 3A and operating temperature range from -40 to 125°C, it offers reliable connectivity in various electronic devices.
B4B-EH-A(LF)(SN)
B4B-EH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" pitch, 0.492" body length, and 0.15" body width. It uses TIN COPPER termination for soldering applications in headers & edge type connectors. The connector features POLYAMIDE66 insulator material and BRASS contact material, suitable for various electronic devices requiring a male contact gender.
53253-0470
The Molex 53253-0470 is a board connector with a mating contact pitch of 0.079 inches and a body width of 0.144 inch. It features bright tin termination contact finish and is commonly used in commercial applications for its reliability and multiple mating parts availability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF40C-100DS-0.4V(51)
Hirose Electric
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
DF40HC(3.0)-100DS-0.4V(51)
DF40HC(3.0)-100DS-0.4V(51) by Hirose Electric is a 2-row stacking connector with 100 contacts, gold-plated for durability and signal current up to 0.3A. Featuring liquid crystal polymer insulation, it offers high dielectric voltage of 100VAC and operates b/w -35°C to 85°C. Ideal for board mounting applications requiring reliable female connectors with bellowed contact style and locking option.
DF40C-90DS-0.4V(51)
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
DF40HC(3.0)-100DS-0.4V(58)
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
DF40C-100DS-0.4V(58)
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
DF40C-80DP-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
DF40C-100DP-0.4V(51)
DF40C-100DP-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" pitch, 100VAC dielectric voltage, and gold termination finish. Ideal for PCB applications requiring a durable, polarized male plug with liquid crystal polymer insulator material. Operating temperature range from -35 to 85°C makes it suitable for commercial use in various electronic devices.
DF40C-100DS-0.4V
DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.
DF40C-100DS-0.4V(57)
DF40C-100DS-0.4V(57) by Hirose Electric is a 2-row, 100-contact board stacking connector with liquid crystal polymer insulator. Featuring 0.016" mating contact pitch and 100VAC dielectric voltage, it operates b/w -35°C to 85°C. Ideal for applications requiring high durability and signal current of 0.3A, such as PCB connections in electronics industry.
DF40C-60DP-0.4V(51)
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
DF40HC(4.0)-80DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
DF40C-30DP-0.4V(51)
DF40C-30DP-0.4V(51) by Hirose Electric is a 30-contact male plug connector with 0.016" pitch, 100VAC voltage rating, and 85°C max operating temp. Ideal for board stacking applications, featuring liquid crystal polymer insulator material and tin termination finish.
DF40C-40DP-0.4V(51)
DF40C-40DP-0.4V(51) by Hirose Electric is a 2-row, 40-contact board stacking connector with 0.016" pitch and 100VAC dielectric voltage. Ideal for PCB applications, it features liquid crystal polymer insulation, tin termination finish, and a polarization key for secure connections in commercial environments.
DF40C-20DP-0.4V(51)
DF40C-20DP-0.4V(51) by Hirose Electric is a 20-contact male plug connector with 0.016" pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for board stacking applications, it features liquid crystal polymer insulator, tin termination finish, and operates b/w -35 to 85°C.
DF40C-40DS-0.4V(51)
DF40C-40DS-0.4V(51) by Hirose Electric is a 2-row, 40-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it has a mating contact pitch of 0.016" and dielectric voltage of 100VAC. Ideal for PCB applications requiring durability, reliability, and signal current rating of 0.3A in commercial settings.
DF40HC(4.0)-60DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Mixed Contacts: NO;
DF40HB(2.5)-10DS-0.4V(51)
DF40HB(2.5)-10DS-0.4V(51) by Hirose Electric is a 10-contact board stacking connector with gold termination, LCP insulator, and 100VAC dielectric voltage rating. It has a mating pitch of 0.016", -35 to 85°C operating temp range, and UL94V-0 flammability rating. Ideal for applications requiring durable female connectors with surface mount termination in black color.
DF40C-20DS-0.4V(51)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
DF40C(2.0)-40DS-0.4V(51)
DF40HC(3.0)-70DS-0.4V(58)
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved