Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 776261-4 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Featuring 14 contacts, it has a rated current of 8A and operates b/w -40 to 105°C. Ideal for board mounting applications requiring a polarized, male contact style connector.
Median Price
$6.010
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$8.870
100+ parts
$5.990
1k+ parts
$4.850
10k+ parts
-
Verical
$3.428
$2.910
PEI Genesis
Master Electronics
$6.020
$5.500
Newark
$5.400
$5.200
DigiKey
$3.860
Chip1Stop
$6.350
$3.810
Farnell
$5.080
Nova Conductors
$5.026
Vyrian
$5.130
Digiode
$7.514
VNN
Rapid Electronics
$6.557
IBS Electronics
$5.638
$3.612
TME
$6.687
$4.286
Electro Sonic
$5.850
$5.010
$4.930
Continental Prestige Electronics
$4.926
Netroflash
Aztec Data Supply Inc.
$5.499
Corphita
$7.119
Argo Parts USA
Assy Fe
The compact body length makes this connector suitable for applications with limited space.
The narrow body width allows for efficient use of space on the circuit board.
The use of high-quality insulator material ensures durability and reliability in various operating conditions.
Having multiple rows loaded allows for more connections to be made, increasing the versatility of the connector.
The high maximum operating temperature makes this connector suitable for applications where temperature can vary.
With a low minimum operating temperature, this connector can be used in cold environments without issues.
The option for an empty shell allows for customization and flexibility in the number and type of contacts used.
Being a combination line connector allows for multiple types of connections to be made in a single device.
This high flammability rating ensures safety and compliance with industry standards.
The polarization key ensures proper alignment and connection during installation.
The high rated current for signal transmission allows for reliable data transmission through the connector.
Compliance with UL standards ensures quality and safety in the design and manufacturing of the connector.
Having a high number of contacts allows for multiple connections to be made within the same connector assembly.
The board mounting type allows for easy and secure installation on the circuit board.
The standard terminal pitch of 4mm enables compatibility with a wide range of applications and devices.
The high mains connector rating ensures efficient power transmission without overheating or voltage drop.
The solder termination type provides a reliable and durable connection method for the contacts.
The male contact gender is commonly used for connectors in various electronic devices, ensuring compatibility.
The straight mounting style simplifies installation and alignment on the circuit board.
The round pin and socket contact style allows for secure and precise connections between components.
Combination Line Connectors 776261-4 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
776261-4 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Goodwork Semiconductor
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
AT04-2P-GRN
Amphenol
The Amphenol AT04-2P-GRN is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S-GRN connectors, using crimp termination method.
12162102
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; No. of Rows Loaded: 1; Total No. of Contacts: 4;
12020827
Aptiv
Aptiv's 12020827 is a POLYAMIDE66 combination line connector with 3 contacts for cable mounting. It features male contact gender, crimp termination, and mates with 12020829. Ideal for automotive wiring harnesses due to its reliable connection and durability.
1-180908-0
TE Connectivity
TE Connectivity's 1-180908-0 is a Combination Line Connector with 2 contacts, POLYAMIDE insulator, and 1.24" body length. Ideal for applications requiring a male contact gender, operating temperatures from -40 to 105°C, and mains connector rating of 115/230VAC.
54201412
Aptiv's 54201412 is a Combination Line Connector with dimensions of 1.311" x 0.882" x 0.945". It features POLYAMIDE insulator material, 3 rows loaded, and 14 FEMALE contacts. Ideal for automotive applications requiring reliable electrical connections in tight spaces.
AT04-12PA-RD01
The Amphenol AT04-12PA-RD01 is a Combination Line Connector with 12 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.598" x 0.882" x 1.996".
AT04-12PA-BL08
The Amphenol AT04-12PA-BL08 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It has a body size of 2.181" x 1.402" x 1.992", made of POLYETHYLENE for -55 to 125°C applications in cable and panel mounting setups.
15300002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Termination Type: CRIMP; No. of Rows Loaded: 1;
AT06-2S-RD01
The Amphenol AT06-2S-RD01 is a combination line connector with 2 contacts, rated at 13A. Featuring a POLYETHYLENE insulator, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-2P-RD01 connectors for crimp termination in female plug configurations.
F934000
AMPHENOL ICC
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Filter Feature: NO;
ATP04-4P-PM01
The Amphenol ATP04-4P-PM01 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signal current, and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring female contact gender and round pin/socket style connections.
DT04-3P-C015
TE Connectivity's DT04-3P-C015 is a 1.698" x 0.832" x 0.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 3 contacts, UL 94V-0 flammability code, and a polarization key. Ideal for applications requiring a polarized male connector with crimp termination and strain relief mounting on cables.
12084891
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mating Info.: 12186400; IEC Conformity: NO;
DT04-08PA-E008
TE Connectivity's DT04-08PA-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DT06-12SB-P012
TE Connectivity's DT06-12SB-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
12162144B
12162144B by Aptiv is a Combination Line Connector with 4 contacts, rated at 14A signal current. It has a temperature range of -40 to 125°C, suitable for various applications. The connector features female contact gender and round pin-socket style, ideal for cable mounting with an empty shell design.
194180002
Molex
Molex 194180002 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER insulator. Featuring 8 contacts, it uses CRIMP termination and is UL 94V-0 rated. Ideal for cable mounting applications requiring female receptacle connectors.
1-1564526-1
TE Connectivity's 1-1564526-1 is a combination line connector with dimensions of 2.461" x 1.567" x 1.854". It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 140°C. This connector is commonly used in panels and has a UL flammability code of 94V-0, making it suitable for various applications requiring a max current of 20A.
929504-4
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mixed Contacts: NO;
194190011
Molex 194190011 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
776231-1
TE Connectivity's 776231-1 is a Combination Line Connector with Mating Contact Pitch of 0.157", Insulation Resistance of 100MΩ, and Operating Temperature range from -40°C to 105°C. Ideal for board mounting applications, this connector features a total of 35 contacts in a polarized housing design.
776228-1
TE Connectivity's 776228-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, 2.394" Body Length, and 100000000 ohm Insulation Resistance. Ideal for board mounting applications in commercial settings due to its UL Flammability Code of 94V-0 and rated current of 8A.
776200-1
TE Connectivity's 776200-1 is a combination line connector with dimensions of 2.394" x 1.264" x 0.757". It has a max operating temperature of 105°C and a min operating temperature of -40°C. This connector, made of POLYBUTYLENE TEREPHTHALATE, is suitable for board mounting applications and has a rated current of 8A.
776262-1
TE Connectivity's 776262-1 is a Combination Line Connector with 3 rows, UL94V-0 rated, and 14 contacts. It has a mating contact pitch of 0.157", suitable for PCB mounting at temperatures ranging from -40°C to 105°C. Ideal for commercial applications requiring an 8A signal current capacity.
776280-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 4; Total No. of Contacts: 8; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
776230-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 3.03 inch; DIN Conformance: NO; Termination Contact Finish: NOT APPLICABLE;
776267-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mounting Type: BOARD AND PANEL; JESD-609 Code: e0;
776231-2
TE Connectivity's 776231-2 is a Combination Line Connector with Mating Contact Pitch of 0.157", Insulation Resistance of 100MΩ, and Operating Temperature range from -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
776262-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: SN;
776267-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 3;
776230-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 8A; Mounting Style: STRAIGHT; IEC Conformity: NO;
776231-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
776262-2
TE Connectivity's 776262-2 is a Combination Line Connector with 3 rows, UL 94V-0 rated, and operates b/w -40°C to 105°C. With male contact gender and solder termination, it suits commercial applications requiring a max signal current of 8A on PCBs with staggered contact pattern.
776262-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: STAGGERED;
776261-1
TE Connectivity's 776261-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Featuring 14 contacts, it has a rated current of 8A and operates b/w -40 to 105°C. Ideal for board mounting applications requiring a polarized, male contact style connector.
776266-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Polarization Key: POLARIZED; UL Flammability Code: 94V-0;
776267-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
776261-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Empty Shell: YES; Reference Standard: UL;
776261-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; No. of Rows Loaded: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved