Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
Median Price
$2.882
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$2.940
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.180
$2.540
$2.220
$2.080
DigiKey
$3.630
$2.622
$2.229
$2.089
TTI
$2.440
Master Electronics
$2.250
$1.960
$1.710
Verical
$2.823
$2.639
VNN
$1.950
Nova Conductors
$1.990
Digiode
$2.793
Vyrian
EMSNET
IBS Electronics
$3.997
$2.847
$2.637
Extreme Components
Continental Prestige Electronics
$1.926
$1.888
Argo Parts USA
Bastille Electronics
$1.890
$1.796
$1.771
Advanced Electronics
$2.006
$1.906
Corphita
$2.646
Semicontronic
$3.680
$3.588
$3.570
Aztec Data Supply Inc.
$7.320
Perfect Parts
Compact size allows for easy installation in tight spaces.
Suitable for a wide range of applications requiring electrical connectivity.
Provides excellent insulation properties and durability.
Can withstand high temperatures, ensuring reliability in various environments.
Capable of functioning in extreme cold conditions without issues.
Specifically designed for connecting multiple lines efficiently.
UL certified for high flammability resistance, ensuring safety.
Supports high current signals, making it suitable for various applications.
Provides ample connectivity options for multiple connections.
Allows for secure and reliable wire connections.
Combination Line Connectors DTM06-12SB-E003 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DTM06-12SB-E003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - End of Life 31/AUG/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Fairchild Semiconductor
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Semiconductors
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Transistor & Electronic
282189-1
TE Connectivity 282189-1 is a Combination Line Connector with dimensions of 0.937"x.866"x1.476". Rated for 24V, it has POLYAMIDE insulator and operates b/w -30 to 125°C. With 20A signal current, it features polarized housing and female contact gender, suitable for cable mounting applications.
12015798
Aptiv
Aptiv's 12015798 is a Combination Line Connector with POLYAMIDE6 insulator. It has 4 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 12015024.
2103124-4
TE Connectivity's 2103124-4 is a Combination Line Connector with EMI shielding, male contact gender, and blade pin-skt contact style. It has a body length of 1.78", width of 1.59", and depth of 1.224". Ideal for commercial applications requiring a mains connector rating of 115/230VAC.
AT06-4S-SR02BLK
Amphenol
The Amphenol AT06-4S-SR02BLK is a 2-row combination line connector with 4 contacts, rated for 13A signal current. It has a compact body size of 0.906" x 0.815" x 1.728", suitable for cable mounting applications. Operating temperature range is -55°C to 125°C, making it ideal for various industrial and automotive uses.
776262-1
TE Connectivity's 776262-1 is a Combination Line Connector with 3 rows, UL94V-0 rated, and 14 contacts. It has a mating contact pitch of 0.157", suitable for PCB mounting at temperatures ranging from -40°C to 105°C. Ideal for commercial applications requiring an 8A signal current capacity.
1-967616-1
TE Connectivity 1-967616-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, rated at 7.5A for signal current, and operates b/w -40 to 120°C. Ideal for cable mounting applications due to its compact dimensions of 0.945" x 0.669" x 1.197".
DTM04-08PA
TE Connectivity's DTM04-08PA is a 2-row, 8-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, male receptacle with strain relief.
DT06-6S-E005
TE Connectivity's DT06-6S-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with female contacts.
DT06-6S-CE01
The TE Connectivity DT06-6S-CE01 is a Combination Line Connector with dimensions of 1.268" x 0.82" x 0.946". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is ideal for applications requiring a polarized, female contact style with crimp termination.
34797-0202
Molex
Molex 34797-0202 is a Combination Line Connector with 0.598" x 0.555" x 1.417" dimensions, made of POLYBUTYLENE TEREPHTHALATE. It has 2 contacts, male gender, blade pin-skt style, and is used for cable mounting with crimp termination.
DTM06-6S-EE04
TE Connectivity's DTM06-6S-EE04 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring UL-certified connectors with polarization key and strain relief option.
64319-3211
Molex 64319-3211 is a waterproof combination line connector with 32 contacts. Made of glass-filled PBT/PET, it has female crimp termination for cable mounting. Ideal for applications requiring reliable and secure electrical connections in harsh environments.
DTM04-4P-E005
TE Connectivity's DTM04-4P-E005 is a 1.77" x 0.756" x 0.772" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. It operates b/w -55°C to 125°C, UL certified with polarized design for one connector application in cable mounting setups.
12065402
Aptiv's 12065402 is a Combination Line Connector with dimensions of 0.964" x 0.791" x 1.023". It features 2 female SQ PIN-SKT contacts and is ideal for automotive applications.
1600280013
Molex 1600280013 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has dimensions of 1.293" x 0.775" x 1.079", suitable for cable mounting applications. Operating temperature range from -40°C to 85°C, making it ideal for various industrial uses.
732-8256-20
TE Connectivity's 732-8256-20 is a Combination Line Connector with -55 to 175 °C operating temperature range. Featuring 12 contacts, rated at 7.5A for signal current, it is ideal for board mounting applications requiring female solder termination.
AT04-4P-BLK
The Amphenol AT04-4P-BLK is a combination line connector with 2 rows, rated for 13A signal current. With a temperature range of -55 to 125°C, it features male contact gender and round pin/socket style. Ideal for cable mounting applications, mating with AT04-4S-BLK connectors.
DF62W-9S-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
DTP04-4P-LE07
TE Connectivity's DTP04-4P-LE07 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A. Ideal for applications requiring a polarized, UL-rated connector with male contact gender and wire termination.
12015797
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
DTM04-2P
TE Connectivity's DTM04-2P is a 1.62" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL certification, and polarized design. Ideal for applications requiring a 7.5A signal current in cable mounting setups with crimp termination and strain relief option.
DTM06-12SA
TE Connectivity's DTM06-12SA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
DTM04-2P-E007
TE Connectivity's DTM04-2P-E007 is a 2.005" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, polarized key, and male gender suitable for cable mounting applications at 7.5A signal current.
DTM04-2P-P006
TE Connectivity's DTM04-2P-P006 is a 1.68" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator for 250V, -55 to 125 °C operation. It features UL 94V-0 flammability, polarized key, and male contact gender suitable for cable mounting applications at 7.5A signal current rating.
DTM06-12SA-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 1.245 inch; Mounting Option-2: W/STRAIN RELIEF;
DTM04-2P-EP10
TE Connectivity's DTM04-2P-EP10 is a 1.68"x.651"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 7.5A signal current. Ideal for cable mounting applications requiring a male receptacle contact style with strain relief option.
DTM06-2S-P006
DTM06-2S-P006 by TE Connectivity is a combination line connector with dimensions of 1.145" x 0.569" x 0.508". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 7.5A.
DTM04-2P-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; Contact Style: RND PIN-SKT;
DTM06-2S-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Mounting Option-2: W/STRAIN RELIEF;
DTM06-12SA-EE04
TE Connectivity's DTM06-12SA-EE04 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
DTM04-2P-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.68 inch; IEC Conformity: NO;
DTM06-2S-EP10
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: CRIMP; Rated Voltage: 250 V;
DTM04-2P-EE03
TE Connectivity's DTM04-2P-EE03 is a combination line connector with 2.005"x.651"x.638" dimensions, rated for 250V and 125°C. Ideal for applications requiring a polarized male receptacle with UL certification, suitable for signal currents up to 7.5A in cable mounting setups with strain relief option available.
DTM06-2S-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: CABLE; Body Depth: .508 inch;
DTM06-2S-E003
TE Connectivity's DTM06-2S-E003 is a 1.145" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 7.5A signal current rating. Ideal for cable mounting applications requiring crimp termination and strain relief.
DTM06-2S-EE03
TE Connectivity's DTM06-2S-EE03 is a 1.47" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring polarized housing, UL 94V-0 flammability code, and crimp termination, it's ideal for cable mounting applications requiring a 7.5A signal current.
DTM04-6P-E004
TE Connectivity's DTM04-6P-E004, a 1.72" x 0.756" x 0.937" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 6 contacts, UL94V-0 flammability code, and male gender for cable mounting applications at 7.5A signal current.
DTM04-6P-E003
TE Connectivity's DTM04-6P-E003 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DTM06-12SB-E007
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO; Rated Voltage: 250 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved