Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5555153-6 is a Telecom & Datacom Connector with EMI shielding. It features 0.705" body length, 0.495" width, and 0.5" depth. Ideal for telecom applications due to its 500M ohm insulation resistance, PBT-POLYESTER insulator material, and UL 94V-0 flammability code.
Median Price
$1.455
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Master Electronics
1+ parts
$1.289
100+ parts
-
1k+ parts
$1.116
10k+ parts
$0.757
Verical
$1.460
$1.380
$0.910
Mouser Electronics
$1.980
$1.700
$1.490
$1.220
TE Connectivity
$2.050
$1.820
$1.660
DigiKey
$2.390
$1.810
$1.525
PEI Genesis
Chip1Stop
$1.450
$1.320
$0.818
Farnell
$1.430
$1.340
Powell Electronics
$1.390
$1.270
Digiode
$1.226
Nova Conductors
$1.322
Rapid Electronics
TME
$1.240
$0.870
Vyrian
VNN
Electro Sonic
$1.369
$0.901
Bristol Electronics
Atlantic Semiconductor
IBS Electronics
$1.658
$1.558
$1.034
Corphita
$1.161
Perfect Parts
Netroflash
$1.295
$1.256
$1.229
Robosynatics
$1.486
$1.376
Lucentia Tech
Assy Fe
Provides a compact and space-saving design, ideal for applications with limited space.
Ensures reliable and stable electrical performance, reducing the risk of signal interference or loss.
Helps in minimizing electromagnetic interference, ensuring signal integrity in high-frequency applications.
Provides corrosion resistance and durability, ensuring long-term reliability of the connector.
Offers high mechanical strength and thermal stability, suitable for demanding operating conditions.
Provides excellent conductivity and durability, enhancing the overall performance and longevity of the connector.
Can handle higher current levels, making it suitable for applications requiring higher power transmission.
Enables easy and secure installation in confined spaces, optimizing the layout of the connector.
Telecom & Datacom Connectors 5555153-6 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5555153-6 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Weitron Technology
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Formosa Microsemi
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Diodes Incorporated
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
4554
Jw Miller Magnetics
Other Semiconductors;
67068-7041
Molex
Molex 67068-7041 USB connector features 2 rows, 4 contacts, and TIN termination finish. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The connector has a body length of 0.472", insulation resistance of 1Gohm, and operates b/w 0-50°C.
43202-4101
The Molex 43202-4101 is a telecom & datacom connector with 0.44" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecommunications equipment due to its durable brass shell, right-angle mounting style, and female contact gender.
5787745-1
TE Connectivity USB connector 5787745-1 with POLYETHYLENE insulator, 8 contacts, and 1A signal current rating. Ideal for telecom/datacom applications, featuring solderable retention clips for board mounting and a durable copper alloy shell. Operating temperature range from -55 to 85°C ensures reliable performance in various environments.
FS1Z3820Z660
AMPHENOL ICC
Telecom and Datacom Connectors;
2169900003
TELECOM AND DATACOM CONNECTOR;
5555153-1
TE Connectivity 5555153-1 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and 500M ohm insulation resistance. Ideal for board mounting with split board lock option, it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
RJHSE-5381-A1
Amphenol Communications Solutions
Amphenol RJHSE-5381-A1 is a telecom & datacom connector with 8 contacts, POLYETHYLENE insulator, and TIN shell finish. It operates b/w -55°C to 85°C, suitable for board mounting in telecommunications applications. Featuring a right-angle mounting style and staggered PCB contact pattern, it offers secure solder termination for female connectors.
SCRU-02
Samtec
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; IEC Conformity: NO; Contact Material: PHOSPHOR BRONZE;
GSB343133HR
Amphenol
GSB343133HR by Amphenol is a USB connector with 10 contacts, gold over nickel finish, and liquid crystal polymer insulator. Ideal for telecom/datacom applications, it features female contact gender, surface mount termination, and stainless steel shell material in a right-angle receptacle design.
PX0456
Bulgin
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
95501-2441
Molex 95501-2441 is a telecom & datacom connector with 0.44" body length, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 500000000 ohm insulation resistance. Ideal for board mounting in applications requiring a right angle jack style connector with 4 contacts and solder termination.
UE27-AE54-100
Amphenol UE27-AE54-100 is a USB connector with mixed contacts and filter feature. It has insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its solderable retention clips for board mounting and durable design lasting up to 1500 cycles.
48391-0003
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
10126-6000EC
3m Electronic Products Division
10126-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
47590-1001
47590-1001 by Molex is a USB connector with 5 contacts, made of brass and housed in a stainless steel shell. It has a liquid crystal polymer insulator and matte tin finish. This right-angle receptacle is commonly used in telecom and datacom applications for surface mount board mounting.
ZX80-B-5S(30)
Hirose Electric
USB CONNECTOR; Termination Contact Finish: Gold (Au); JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
54819-1572
54819-1572 by Molex is a USB connector with 5 contacts, 0.39" body length, and 0.156" body width. It features liquid crystal polymer insulation material and tin termination finish. Ideal for telecom/datacom applications, it offers 5000 cycle durability and operates b/w 0-50°C temperature range.
5520258-3
TE Connectivity 5520258-3 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500M ohm and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for telecom applications, it features a split board lock mounting option and solder termination type.
MP1010RX-5000
Kycon
Kycon's MP1010RX-5000 is a male plug telecom connector with 1010 contacts. It features gold flash termination, copper alloy contact material, and 1400VAC dielectric voltage. Ideal for telecom and datacom applications, this connector has a temperature range of -55 to 85°C and UL flammability rating of 94V-2.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5555165-1
TE Connectivity 5555165-1 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and 0.5" depth. It has an insulation resistance of 500M ohm and operates b/w -40 to 85°C. Ideal for telecom applications, it features a female contact gender, solder termination type, and UL94V-0 flammability rating.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2;
5555162-1
TE Connectivity 5555162-1 is a Telecom & Datacom Connector with 0.7" body length, PBT-POLYESTER insulator, and 500M ohm insulation resistance. It features SPLIT BOARD LOCK mounting option for applications requiring 1.5A signal current, UL94V-0 flammability rating, and right angle mounting style.
5555164-1
TE Connectivity 5555164-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, operates b/w -40 to 85°C, and features a polarized housing for durability. Ideal for telecom and datacom applications requiring reliable signal connections.
5555167-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
5555165-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Length: .15 inch;
5555764-1
TE Connectivity's 5555764-1 is a Telecom & Datacom Connector with 0.605" body length, POLYAMIDE insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a polarized housing, 8 contacts, and surface mount termination.
5555140-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
5555141-1
5555165-2
TE Connectivity 5555165-2 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance and operates b/w -40 to 85°C. Ideal for telecom applications requiring durable connectors with female contact gender and solder termination.
5555248-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Withdrawal Force (N): 22.24;
5555979-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Resistance: 30 mohm;
5555163-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .495 inch;
5555980-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85;
5555163-2
TE Connectivity 5555163-2 is a telecom & datacom connector with 0.625" body length, 0.495" width, and insulation resistance of 500M ohm. It features matte tin finish, PBT-POLYESTER insulator material, and operates b/w -40 to 85°C. Ideal for board mounting with split board lock option in commercial applications.
5555077-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Empty Shell: YES;
5555166-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1;
5-555179-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulator Material: POLYCARBONATE;
5555003-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO;
5555153-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved