Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Median Price
$53.440
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
< 1k
Farnell
1+ parts
$38.240
100+ parts
$24.860
1k+ parts
-
10k+ parts
RS Americas
$39.690
Element14
$48.342
$43.596
Newark
$44.030
DigiKey
$53.530
$38.681
$36.263
Interstate Connecting
$55.560
$43.406
$37.625
Mouser Electronics
$60.210
$45.880
Verical
TME
$38.860
$33.440
$31.200
Vyrian
Goldney Electronics S.L.
Powertech Controls
Euro-Tech
AZTECH Wire
$6.840
Continental Prestige Electronics
$37.520
$23.900
Allen Electronics Distributors
$44.870
Neutron USA
$104.990
Argo Parts USA
Bastille Electronics
Telecom & Datacom Connectors 09454521921 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Harting Electronics & Kg
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
09454521921 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
HARTING develops, manufactures and sells electrical and electronic connectors, device terminations, network components as well as cable harnesses for networks or machinery, or for power and data application in factories. Our products are used in mechanical and plant engineering, factory automation, power generation and distribution as well as industrial electronics and telecommunication.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
General Instrument
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
51387-0578
Molex
The Molex 51387-0578 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, this connector has a GLASS FILLED POLYETHYLENE insulator, solder holding posts for board mounting, and operates b/w 0 to 50°C.
SFPK-SL
Samtec
SFPK-SL by Samtec is a telecom & datacom connector with 20 contacts, LIQUID CRYSTAL POLYMER insulator, and UL 94V-0 flammability rating. It features a right-angle mounting style for board termination applications.
USB4125-GF-A-0190
Global Connector Technology
USB4125-GF-A-0190 by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features liquid crystal polymer insulation, stainless steel shell material, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications with board mounting option and right-angle mounting style.
PX0443
Bulgin
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
632722110112
Wuerth Elektronik & Kg
632722110112 by Wurth Elektronik is a USB connector with 24 contacts, rated for 5A signal current. It features gold over nickel termination, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom & datacom applications, it has an insulation resistance of 100M ohm and operates b/w -40 to 85°C.
1546413-3
TE Connectivity
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
MRJ-5381-013
Amphenol
Amphenol MRJ-5381-013 is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination. Ideal for applications requiring POLYETHYLENE insulator material, PHOSPHOR BRONZE contact material, and 8 contacts in a RECEPTACLE shell style.
1345
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Additional Features: MAX CONTACTS (SERIES)=45; Body or Shell Style: PLUG; Mixed Contacts: NO;
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
08211X1T43-F
Bel Fuse
Bel Fuse 08211X1T43-F is a Telecom & Datacom Connector with Tin (Sn) termination, Polybutylene Terephthalate insulator, and Nickel shell finish. It has 8 contacts for board and panel mounting in right angle style. Ideal for applications requiring UL94V-0 flammability code compliance.
10220-1210PE
3m Electronic Products Division
10220-1210PE by 3M is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 707VAC. Ideal for board and panel mounting in telecom and datacom applications due to its gold-plated contacts, glass-filled polyester insulator, and operating temperature range from -55°C to 105°C.
ARF6-16-S-D-A-K-TR
The Samtec ARF6-16-S-D-A-K-TR is a telecom & datacom connector with 16 contacts, featuring matte tin over nickel finish. With liquid crystal polymer insulator and copper alloy shell, it has a terminal pitch of 0.635mm and operates b/w -40 to 125°C. Ideal for surface mount applications in telecommunications and data communication systems.
67329-8001
The Molex 67329-8001 USB connector features a body length of 0.57", insulation resistance of 1000000000 ohm, and dielectric voltage of 1050VAC. Ideal for telecom/datacom applications, this male connector has a gold contact finish, glass-filled polyamide insulator, and is rated for 1500 cycles durability.
5406299-1
TE Connectivity 5406299-1 is a Telecom & Datacom Connector with EMI shielding, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts. It has a body size of 0.7" x 0.57" x 0.54", rated for 1.5A signal current, and suitable for board and panel mounting in telecom applications.
GSB3211311WEU
GSB3211311WEU by Amphenol is a USB connector with 9 contacts, featuring matte tin termination finish. It has a body length of 0.472", width of 0.507", and depth of 0.722". Ideal for telecom/datacom applications, it offers high insulation resistance (100M ohm) and operates b/w -55°C to 85°C.
104004-0505
Telecom and Datacom Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
987
Keystone Electronics
Telecom and Datacom Connectors;
XP1001000-05R
Lantronix
The Lantronix XP1001000-05R is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and right angle mounting style. It has a temperature range of -40 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors.
74990101210
74990101210 by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel shell finish, Copper Alloy shell material, and is UL 94V-0 rated. Ideal for board mounting in telecom and datacom applications.
124019032112A
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
09454521924
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
09454521920
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
09454521925
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
09454521910
09454521912
09454521923
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
09451511560XL
09451511560
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
09455451564
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Body Length: .614 inch;
09455511102
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Termination Contact Finish: TIN OVER NICKEL;
09455511103
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; UL Flammability Code: 94V-0; No. of Ports: 1;
09451151560
09455511100
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Material: NOT SPECIFIED;
09451451100
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Contact Material: NOT SPECIFIED; Mounting Type: CABLE;
09451511520XL
09451511520XL by Harting Electronics & Kg is a Telecom & Datacom Connector with 0.55"x.315" body size, 8 contacts, and rated for 1.5A signal current. Ideal for telecom applications, it has a durability of 750 cycles and operates b/w -40°C to 70°C temperatures.
09455511110
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 8; Board Mounting Option: PEG; Body Width: .463 inch;
09451511100
09451511100 by Harting Electronics & Kg is a POLYCARBONATE TELECOM AND DATACOM CONNECTOR with 4 contacts, UL 94V-0 flammability rating. It is designed for cable mounting with IDC termination, ideal for telecom and datacom applications requiring reliable male jack connectors.
09452151100
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
09451151100
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mixed Contacts: NO; Total No. of Contacts: 4;
09454521964
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved