Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5555141-1 is a telecom & datacom connector with EMI shielding. It has 8 contacts, PBT-POLYESTER insulator, and operates b/w -40 to 85°C. Ideal for board and panel mounting in commercial applications requiring high insulation resistance.
Median Price
$1.980
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Element14
1+ parts
$1.709
100+ parts
$1.523
1k+ parts
$1.373
10k+ parts
$1.366
Arrow
$1.800
$1.514
$1.335
-
RS (Exports)
$2.160
Mouser Electronics
$2.360
$1.850
$1.550
$1.390
Chip1Stop
$2.520
$1.050
$0.939
TE Connectivity
$2.550
$2.260
$2.060
Newark
$2.610
$1.950
$1.780
DigiKey
$2.620
$1.986
$1.672
$1.507
RS Americas
$2.790
$2.370
Master Electronics
$1.277
$0.882
PEI Genesis
Verical
$1.506
$1.447
TTI
$1.280
$0.900
Powell Electronics
$1.530
TTI Europe
$1.236
$1.137
Future Electronics
$1.240
$1.190
Farnell
$2.700
$2.050
Nova Conductors
$1.308
Digiode
$1.492
Voyager Components
$1.636
TME
$1.960
$1.430
Component Electronics Inc.
$3.080
$2.310
$2.000
IBS Electronics
$1.812
$1.726
Electro Sonic
ComSIT Distribution GmbH
ComSIT USA
VNN
Vyrian
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Sensible Micro Corp
NAC Semi
$2.290
Bristol Electronics
Pegasus Components GmbH
Quantum Digital Technology
Rapid Electronics
$2.137
Prism Electronics
PC Components Company LLC
Semi Source
J & M Industries LLC
EMSNET
Semicontronic
$0.980
$0.956
$0.951
Argo Parts USA
Corphita
$1.413
Continental Prestige Electronics
$2.280
$2.100
$1.840
Kepictronics
Perfect Parts
Glotronic Ltd.
Assy Fe
Standard Data Resources (Excess)
Authorized Procurement Solutions
EMSNET (Excess)
The compact body length allows for a space-saving design, making it ideal for applications where size constraints are a concern.
High insulation resistance ensures signal integrity and reliability in data transmission, making this connector suitable for use in telecom and datacom applications.
EMI shielding helps prevent electromagnetic interference, ensuring stable and secure communication connections in high-frequency environments.
The use of PBT-POLYESTER insulator material provides excellent durability and resistance to heat, making the connector suitable for harsh operating conditions.
The UL 94V-0 flammability rating indicates that the connector meets stringent safety standards, providing peace of mind in terms of fire resistance.
Having 8 contacts allows for multiple signal connections, making this connector suitable for applications requiring complex data transmission.
Solder termination ensures a secure and reliable connection between the connector and the circuit board, minimizing signal loss and ensuring long-term performance.
Telecom & Datacom Connectors 5555141-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
5555141-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs - Mfg location chg 07/JUL/2021
PCN Packaging - MOQ change 26/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Electronic Devices
Taiwan Semiconductor
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LL4148GS08
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Telefunken Microelectronics
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1888250-4
TE Connectivity 1888250-4 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 500M ohm insulation resistance. It features a 0.641" body length, 0.456" width, and 0.165" depth. Ideal for telecom applications requiring durable connectors with high insulation resistance.
3007
Singatron Enterprise
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mixed Contacts: NO; Body or Shell Style: JACK;
2171800001
Molex
TELECOM AND DATACOM CONNECTOR;
2120892-1
TE Connectivity 2120892-1 is a EMI shielded telecom connector with 0.69" body depth and polyethylene insulator. It operates b/w -40 to 85°C, suitable for telecom and datacom applications requiring up to 8 contacts.
74233-202LF
AMPHENOL ICC
Amphenol Icc's 74233-202LF is a Telecom & Datacom Connector with POLYETHYLENE insulator, TIN shell finish, and COPPER ALLOY shell material. Featuring 8 contacts, it is a male plug connector for cable mounting with solder termination. Ideal for high-speed data transmission applications in telecommunications and data communication systems.
ARJM11D7-502-AB-EW2
Abracon
Abracon's ARJM11D7-502-AB-EW2 is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and features staggered PCB contact pattern. Ideal for board mounting in telecom and datacom applications.
85513-5109
Molex 85513-5109 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Insulation resistance of 500MOhm and operating temperature range from -40 to +85°C make it ideal for commercial applications requiring durability up to 1250 cycles.
PCR-E20FS+
Honda Tsushin Kogyo
PCR-E20FS+ by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" mating pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and NICKEL shell finish. Ideal for commercial applications requiring a reliable female contact style with solder termination on a rectangular pattern.
HFJ11-1G02ERL
Halo Electronics
HFJ11-1G02ERL by Halo Electronics is a telecom & datacom connector with 8 contacts, 2 PCB rows, and dielectric voltage of 2100VAC. It has a right-angle mounting style, solder termination type, and operates b/w 0 to 70°C. Ideal for telecommunications and data communication applications.
RJ45-8N4-S
TE Connectivity's RJ45-8N4-S is a telecom & datacom connector with 8 contacts, 1000VAC dielectric voltage, and 50u plating thickness. It features a 0.7" x 0.515" x 0.74" body size, glass-filled polyester insulator, and solder termination. Ideal for board mounting applications in telecommunications and data communication systems.
74990101241
Wuerth Elektronik & Kg
74990101241 by Wurth Elektronik is a Telecom & Datacom Connector with 0.661" body length, 0.689" width, and 0.689" depth. Featuring POLYETHYLENE insulator material, it has 8 contacts for board mounting at 2.54mm pitch. Ideal for telecom and datacom applications with UL94V-0 flammability rating and operating temperature range of -40 to 85°C.
RJHSE-5381-A1
Amphenol Communications Solutions
Amphenol RJHSE-5381-A1 is a telecom & datacom connector with 8 contacts, POLYETHYLENE insulator, and TIN shell finish. It operates b/w -55°C to 85°C, suitable for board mounting in telecommunications applications. Featuring a right-angle mounting style and staggered PCB contact pattern, it offers secure solder termination for female connectors.
6339191-1
TE Connectivity 6339191-1 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. It has a temperature range of -40 to 85°C and UL94V-0 flammability rating. Ideal for board mounting in telecom applications due to its durability and polarization key feature.
241007
Lumberg Connect
The Lumberg Connect 241007 USB connector features a body length of 0.472", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for telecom applications, this male plug connector with solderable retention clips offers reliable signal current of 1A in a right-angle mounting style.
2013595-1
TE Connectivity's 2013595-1 is a Telecom & Datacom Connector with EMI shielding and UL 94V-0 flammability rating. Featuring polarized design, it has 8 contacts, copper alloy shell, and polyethylene insulator. Ideal for telecom applications with operating temperatures from -40 to 85°C.
J1011F01PNL
Pulse Electronics
J1011F01PNL by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.55" width, and 1" depth. Featuring matte tin finish, polyethylene insulator, and nickel shell. Ideal for board and panel mounting in telecommunications applications.
ECF504-SC6-MINI
L-com
Telecom and Datacom Connectors;
HDRA-E68W2LFDT1EC-SL+
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
ZX80-B-5P(30)
Hirose Electric
ZX80-B-5P(30) by Hirose Electric is a USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. It is used in telecom & datacom applications for board and panel mounting due to its nickel shell and stainless steel material. The connector has a UL flammability rating of 94V-0.
ZX62D-B-5PA8(30)
The Hirose Electric ZX62D-B-5PA8(30) USB connector features gold-plated contacts with nickel barrier, suitable for telecom/datacom applications. With a temperature range of -30 to 85°C, this male connector has 5 contacts and surface mount termination. Ideal for board mounting with locking option, ensuring secure connections in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5555165-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Mounting Style: RIGHT ANGLE; Additional Features: 1 PORT, 6-POSITION EACH;
TE Connectivity 5555165-1 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and 0.5" depth. It has an insulation resistance of 500M ohm and operates b/w -40 to 85°C. Ideal for telecom applications, it features a female contact gender, solder termination type, and UL94V-0 flammability rating.
5555153-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2;
5555162-1
TE Connectivity 5555162-1 is a Telecom & Datacom Connector with 0.7" body length, PBT-POLYESTER insulator, and 500M ohm insulation resistance. It features SPLIT BOARD LOCK mounting option for applications requiring 1.5A signal current, UL94V-0 flammability rating, and right angle mounting style.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 8; Mixed Contacts: NO;
5555164-1
TE Connectivity 5555164-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, operates b/w -40 to 85°C, and features a polarized housing for durability. Ideal for telecom and datacom applications requiring reliable signal connections.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Type: BOARD AND PANEL; Mating Contact Finish: GOLD (50) OVER NICKEL;
5555167-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
5555165-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Length: .15 inch;
5555140-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Termination Type: SOLDER;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
5555165-2
TE Connectivity 5555165-2 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance and operates b/w -40 to 85°C. Ideal for telecom applications requiring durable connectors with female contact gender and solder termination.
5555764-1
TE Connectivity's 5555764-1 is a Telecom & Datacom Connector with 0.605" body length, POLYAMIDE insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a polarized housing, 8 contacts, and surface mount termination.
5555163-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Empty Shell: NO; Additional Features: LOW PROFILE;
TE Connectivity 5555163-2 is a telecom & datacom connector with 0.625" body length, 0.495" width, and insulation resistance of 500M ohm. It features matte tin finish, PBT-POLYESTER insulator material, and operates b/w -40 to 85°C. Ideal for board mounting with split board lock option in commercial applications.
5555166-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1;
5-555179-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulator Material: POLYCARBONATE;
5555141-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved