Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5-2301996-7 is a EMI shielded connector with 0.531" body depth, made of liquid crystal polymer. It has 8 contacts, UL94V-0 rated, suitable for telecom and datacom applications. Features board lock mounting option and solder termination for right angle board mounting.
Median Price
$19.430
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DigiKey
1+ parts
$21.420
100+ parts
$16.040
1k+ parts
$13.794
10k+ parts
-
Mouser Electronics
$15.270
TE Connectivity
$51.780
$45.860
$42.900
Master Electronics
$41.800
$41.590
$14.180
Verical
$14.500
Newark
$18.660
Farnell
Powell Electronics
$15.330
Arrow
$10.860
$10.818
Chip1Stop
$9.650
$9.430
Vyrian
Digiode
$12.188
Nova Conductors
$13.260
VNN
IBS Electronics
$14.125
Rapid Electronics
TME
$15.020
$13.410
Aztec Data Supply Inc.
$7.340
Semicontronic
$8.200
$7.995
$7.954
Corphita
$11.547
Advanced Electronics
$21.449
$19.733
$18.491
Continental Prestige Electronics
Argo Parts USA
Provides protection against electromagnetic interference, ensuring reliable and high-quality signal transmission.
Offers excellent electrical insulation properties and high temperature resistance, ensuring durability and performance in various environments.
Can withstand high operating temperatures, making it suitable for use in harsh industrial or outdoor conditions.
Capable of functioning in low temperatures without compromising performance, ideal for use in cold environments.
Provides a thick plating layer for enhanced conductivity and corrosion resistance, ensuring long-term reliability.
Meets strict safety standards for flammability, minimizing fire risks and ensuring product safety.
Provides multiple contact points for secure and reliable connections, suitable for complex telecom and datacom applications.
Solder termination offers a robust and permanent connection, ensuring stable signal transmission and longevity.
Telecom & Datacom Connectors 5-2301996-7 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Reference Standard:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5-2301996-7 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Material Change 22/JUN/2022 y-2301996-y product improvement 08/OCT/20202
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Allegro MicroSystems
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
USB4070-30-C
Global Connector Technology
USB4070-30-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom/datacom applications, this connector has a durable stainless steel shell and operates b/w -40°C to 85°C.
USB-RS232-WE-1800-BT_5.0
FTDI
USB-RS232-WE-1800-BT_5.0 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
RJHSE-5384-04
Amphenol
RJHSE-5384-04 by Amphenol is a Telecom & Datacom Connector with 4 ports and 8 contacts. Featuring Matte Tin finish, it has a body length of 2.51", width of 0.53", and depth of 0.62". Ideal for board and panel mounting, this connector uses POLYETHYLENE insulator material and has a shell made of COPPER ALLOY.
6116526-1
TE Connectivity 6116526-1 is a Telecom & Datacom Connector with 0.625" body length, EMI shielding, and 500M ohm insulation resistance. Ideal for board mounting with POLYAMIDE insulator material, it operates b/w -40 to 85°C.
104004-0505
Molex
Telecom and Datacom Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
1-1546405-1
TE Connectivity 1-1546405-1 is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and 2 PCB rows. It operates b/w -20°C to 80°C, rated at 1.5A for signal current. Ideal for telecom applications requiring polarized housing and solder termination on panel mounting.
95522-2887
Molex 95522-2887 is a Telecom & Datacom Connector with 0.708" body length, 0.655" width, and 0.64" depth. It features insulation resistance of 500M ohm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom/datacom applications due to UL reference standard compliance, male contact gender, and solder termination type.
6116075-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; IEC Conformity: NO;
MP1010RX-1000K
Kycon
Kycon's MP1010RX-1000K is a Telecom & Datacom Connector with 10 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500M ohm, and contact material made of copper alloy. Ideal for wire and stranded cable connections in commercial applications with operating temperatures ranging from -55 to 85°C.
48204-0001
The Molex 48204-0001 USB connector features gold termination, glass-filled polyethylene insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications, with a dielectric voltage of 500VAC and operating temperatures from -55 to 85°C. It offers a durable design with solderable retention clips for board mounting in commercial settings.
43223-6101
Molex 43223-6101 is a telecom & datacom connector with 0.985" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in applications requiring 12 contacts, female gender, and solder termination. Operating temp range -40 to 80°C with durability of 500 cycles.
175472-4
175472-4 by Tyco Electronics Amp is a Telecom & Datacom Connector with 36 contacts. It features TIN LEAD/TIN OVER NICKEL termination, POLYAMIDE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting applications requiring a male plug connector with RIGHT ANGLE mounting style.
ARJM11D7-104-AB-EW2
Abracon
ARJM11D7-104-AB-EW2 by Abracon is a Telecom & Datacom Connector with gold termination, 8 contacts, and right angle mounting. It features a polarized housing, staggered PCB contact pattern, and solder termination type. Ideal for telecom and datacom applications requiring reliable board mounting with locking option.
74441-0007
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
SS-7188S-A-NF-1-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
5-554720-3
TE Connectivity 5-554720-3 is a Telecom & Datacom Connector with 0.464" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for wire, solid, flat cable types in telecom applications due to gold flash over nickel termination finish and phosphor bronze contact material.
MUSBR-M5C1-30
Amphenol Communications Solutions
MUSBR-M5C1-30 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a zinc alloy shell, matte tin finish, and polyethylene insulator for durability. Suitable for telecom & datacom applications with operating temperatures from -40 to 105°C.
J00-0045NL
Pulse Electronics
J00-0045NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts. Featuring Matte Tin (Sn) finish, it has a 0.64" body length and 0.545" width. Ideal for board and panel mounting in telecom and datacom applications due to its POLYETHYLENE insulator material and right angle mounting style.
32-5958UL
Cinch Connectivity Solutions
32-5958UL by Cinch Connectivity Solutions is a Telecom & Datacom Connector with Gold (Au) termination contact finish and POLYCARBONATE insulator material. Featuring 8 contacts, it is a male plug connector with IDC termination type suitable for cable mounting applications. The UL 94V-0 flammability code ensures high safety standards.
1775690-2
TE Connectivity's 1775690-2 is a telecom and datacom connector with a polyethylene insulator, board lock mounting option, and nickel shell finish. It has a max operating temperature of 85°C and is rated for 2.5A signal current. This connector is commonly used in telecommunications and data communication applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5-2301994-7
TE Connectivity's 5-2301994-7 is an EMI shielded telecom and datacom connector with a body depth of 0.537 inch. It has a liquid crystal polymer insulator material and can be board mounted using the board lock option. This connector has a max operating temperature of 85°C and is UL certified with a flammability code of 94V-0.
5-2301995-4
TE Connectivity 5-2301995-4 is a EMI shielded telecom & datacom connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for applications requiring high temperature resistance and EMI shielding in telecommunications and data communication systems.
5-2301994-5
TE Connectivity 5-2301994-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
5-2301996-1
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
5-2301996-5
TE Connectivity 5-2301996-5 is a telecom & datacom connector with EMI shielding, LCP insulator, and tin termination. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for board mounting applications in telecommunications and data communication systems.
5-2301994-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Filter Feature: NO; IEC Conformity: NO; Panel Mount: NO;
5-2301995-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Mixed Contacts: NO; Mounting Type: BOARD;
5-2301996-4
TE Connectivity 5-2301996-4 is a EMI shielded connector with 0.531" body depth and LCP insulator. Ideal for telecom/datacom applications, it has UL94V-0 flammability rating, 30u nickel plating, and solder termination.
5-2301996-3
TE Connectivity 5-2301996-3 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications due to its nickel finish, UL certification, and solder termination.
5-2301996-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; Body Depth: .531 inch; IEC Conformity: NO;
5-2301995-1
TE Connectivity 5-2301995-1 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, solder termination, and nickel finish. Ideal for telecom & datacom applications with board mounting option and straight jack style.
5-2301994-9
TE Connectivity's 5-2301994-9 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and board lock mounting. It operates b/w -40 to 85°C and has UL flammability rating of 94V-0. Ideal for telecom and datacom applications requiring right angle board mounting.
5-2301996-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Empty Shell: YES; EMI Shielded: YES;
5-2301994-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Mains Connector Rating: 115/230VAC; Total No. of Contacts: 8;
5-2301994-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body Depth: .544 inch; Mixed Contacts: NO; Insulator Color: BLACK;
5-2301995-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Shell Finish: NICKEL;
5-2301994-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body Depth: .531 inch; Mounting Type: BOARD; Total No. of Contacts: 8;
5-2301996-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; Termination Type: SOLDER; DIN Conformance: NO;
5-2301994-6
TE Connectivity 5-2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and mounts on the board. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
5-2301994-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Reference Standard: UL; Termination Type: SOLDER; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved