Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5-2301994-2 is a EMI shielded connector with 0.544" body depth, made of liquid crystal polymer. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring board mounting with solder termination.
Median Price
$5.040
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$7.840
100+ parts
$5.661
1k+ parts
$4.813
10k+ parts
-
TE Connectivity
$13.800
$12.420
$11.390
Chip1Stop
$4.520
Master Electronics
$4.150
$3.870
$3.750
Verical
$15.188
$14.741
Powell Electronics
$4.870
Farnell
$4.930
Nova Conductors
$5.086
Digiode
$6.564
Vyrian
VNN
Electro Sonic
$11.960
$11.610
$4.130
IBS Electronics
$17.752
$17.667
$6.289
TME
$4.600
Continental Prestige Electronics
$4.984
Netroflash
$4.832
$4.730
Corphita
$6.219
Aztec Data Supply Inc.
$8.320
Argo Parts USA
This feature helps in reducing electromagnetic interference, ensuring a stable and reliable connection for telecom and datacom applications.
The compact body depth allows for a space-saving design, ideal for applications where limited space is a concern.
Liquid crystal polymer provides high temperature resistance and excellent electrical properties, making it suitable for demanding telecom and datacom environments.
The board lock feature ensures secure mounting on a PCB, preventing any movement or disconnection during operation.
With a high maximum operating temperature, this connector can perform reliably even in harsh operating conditions.
The low minimum operating temperature ensures that the connector can withstand cold environments without any performance issues.
The adequate plating thickness provides good corrosion resistance, ensuring a longer lifespan for the connector.
Brass shell material offers good conductivity and durability, essential for maintaining signal integrity in telecom and datacom applications.
Solder termination provides a reliable and robust connection, critical for maintaining signal quality in telecom and datacom systems.
Telecom & Datacom Connectors 5-2301994-2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Reference Standard:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5-2301994-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Bkc Semiconductors
EU2B-YS3103F
Idec
ROTARY SWITCH;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5557969-1
TE Connectivity 5557969-1 is a Telecom & Datacom Connector with EMI shielding. It features 0.715" body length, 0.66" width, and 0.658" depth. Ideal for telecom applications due to its UL-rated durability and polarization key for polarized housing.
10118193-0001LF
Amphenol Communications Solutions
Amphenol's 10118193-0001LF USB connector features gold flash over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. With a rated current of 1.8A, it is ideal for telecom & datacom applications requiring high durability and reliability in board mounting setups.
5558342-1
TE Connectivity 5558342-1 is a Telecom & Datacom Connector with EMI shielding. It has 6 contacts, rated for 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durable connectors with split board lock mounting option.
48037-2000
Molex
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
5-2301995-4
TE Connectivity 5-2301995-4 is a EMI shielded telecom & datacom connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for applications requiring high temperature resistance and EMI shielding in telecommunications and data communication systems.
1734035-4
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; Insulator Material: GLASS FILLED POLYAMIDE6T; Mixed Contacts: NO;
47589-0001
47589-0001 by Molex is a USB connector with gold/nickel termination, LCP insulator, and brass contacts. It has 5 contacts, operates b/w -20 to 85°C, and offers 10000 cycle durability. Ideal for telecom/datacom applications requiring surface mount cable mounting in right angle receptacle style.
1334
Hirose Electric
Hirose Electric's 1334 connector is a male plug with TIN finish, ABS insulator, and designed for telecom & datacom applications. It features cable mounting and is suitable for various connectivity needs in the industry.
UE76-3GA20-3600T
Amphenol
Amphenol UE76-3GA20-3600T is a 20-contact telecom/datacom connector with Liquid Crystal Polymer insulator. Featuring staggered PCB contact pattern, it has right-angle mounting style and female SQ pin-skt contact gender. With -40 to 85°C operating temperature range, it's ideal for board mounting in telecommunications and data communication applications.
446610002
Molex 446610002 is a Telecom & Datacom Connector with GLASS FILLED POLYAMIDE insulator. Featuring 8 contacts, it uses SNAP FIT termination on BOARD AND PANEL mount. Ideal for telecom and datacom applications due to its FEMALE contact gender and JACK body style with UL 94V-0 flammability rating.
5-520424-3
TE Connectivity 5-520424-3 is a Telecom & Datacom Connector with 0.05" mating contact pitch, GLASS FILLED POLYCARBONATE insulator, and 500000000 ohm insulation resistance. Ideal for telecom applications, it features a smoke-gray insulator color, male contact gender, and 1.5A signal current rating.
5520425-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: TOP ENTRY; Termination Type: SOLDER; Manufacturer Series: 5520425;
HDRA-E68LFDT1
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
6-569278-3
Commscope
Commscope 6-569278-3 is a Telecom & Datacom Connector with Glass Filled Polycarbonate insulator. It features 8 contacts, IDC termination, and UL Flammability Code 1863. Ideal for cable mounting applications requiring male plug connectors in telecom and datacom setups.
10103594-0001LF
The Amphenol Communications Solutions 10103594-0001LF USB connector features a body length of 0.317", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom applications, this right-angle receptacle with gold over nickel termination is durable for up to 10,000 cycles.
UX60-MB-5S8(70)
The Hirose Electric UX60-MB-5S8(70) is a USB connector with 5 contacts, rated for 1A signal current. Featuring liquid crystal polymer insulation and a copper alloy shell, it has a durability of 5000 cycles. With a compact body size of 0.303" x 0.156" x 0.354", it is ideal for telecom and datacom applications requiring reliable connectivity in temperatures ranging from -30°C to 75°C.
91483-071
Fci
The Fci 91483-071 is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth, made of POLYAMIDE. Featuring 8 contacts, rated at 3A signal current, it is ideal for telecom and datacom applications requiring a polarized housing and crimp termination on cable mounting.
215877-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Contact Style: TELCOM, MODULAR; IEC Conformity: NO;
UX60A-MB-5ST
The Hirose Electric UX60A-MB-5ST is a Telecom & Datacom Connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for board mounting applications in telecom and datacom systems, this connector offers durability up to 5000 cycles at temperatures ranging from -30°C to 75°C.
J1011F21PNL
Pulse Electronics
J1011F21PNL by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.55" width, and 1" depth. Featuring Matte Tin termination finish, POLYETHYLENE insulator, and BRASS shell material. Ideal for board and panel mounting in telecommunications applications due to its 8 contacts, right angle mounting style, and locking option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5-2301994-7
TE Connectivity's 5-2301994-7 is an EMI shielded telecom and datacom connector with a body depth of 0.537 inch. It has a liquid crystal polymer insulator material and can be board mounted using the board lock option. This connector has a max operating temperature of 85°C and is UL certified with a flammability code of 94V-0.
5-2301994-5
TE Connectivity 5-2301994-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
5-2301996-1
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
5-2301996-5
TE Connectivity 5-2301996-5 is a telecom & datacom connector with EMI shielding, LCP insulator, and tin termination. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for board mounting applications in telecommunications and data communication systems.
5-2301994-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Filter Feature: NO; IEC Conformity: NO; Panel Mount: NO;
5-2301995-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Mixed Contacts: NO; Mounting Type: BOARD;
5-2301996-4
TE Connectivity 5-2301996-4 is a EMI shielded connector with 0.531" body depth and LCP insulator. Ideal for telecom/datacom applications, it has UL94V-0 flammability rating, 30u nickel plating, and solder termination.
5-2301996-3
TE Connectivity 5-2301996-3 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications due to its nickel finish, UL certification, and solder termination.
5-2301996-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; Body Depth: .531 inch; IEC Conformity: NO;
5-2301995-1
TE Connectivity 5-2301995-1 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, solder termination, and nickel finish. Ideal for telecom & datacom applications with board mounting option and straight jack style.
5-2301994-9
TE Connectivity's 5-2301994-9 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and board lock mounting. It operates b/w -40 to 85°C and has UL flammability rating of 94V-0. Ideal for telecom and datacom applications requiring right angle board mounting.
5-2301996-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Empty Shell: YES; EMI Shielded: YES;
5-2301996-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Mains Connector Rating: 115/230VAC; Total No. of Contacts: 8;
5-2301994-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Mains Connector Rating: 115/230VAC; Total No. of Contacts: 8;
5-2301995-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Shell Finish: NICKEL;
5-2301994-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body Depth: .531 inch; Mounting Type: BOARD; Total No. of Contacts: 8;
5-2301996-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; Termination Type: SOLDER; DIN Conformance: NO;
5-2301994-6
TE Connectivity 5-2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and mounts on the board. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
5-2301994-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Reference Standard: UL; Termination Type: SOLDER; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved