Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HEAT SHRINK BOOT; Jacket Material: FLUORO ELASTOMER; Minimum Operating Temperature: -55 Cel; Construction: DUAL WALL; Maximum Operating Temperature: 200 Cel; Material: FLUOROELASTOMER;
Median Price
$382.830
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$188.010
1k+ parts
-
10k+ parts
Nova Conductors
$169.770
Vyrian
VNN
Semicontronic
$12.500
$12.188
$12.125
AZTECH Wire
$19.150
Continental Prestige Electronics
$166.375
Netroflash
$161.282
$157.886
Argo Parts USA
Robosynatics
$53.790
Lucentia Tech
Heat Shrinks 462A034-12-0 attributes and parameters. Explore more Heat Shrinks devices from TE Connectivity
Connector Accessory Type:
Construction:
Jacket Material:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
PCN Design/Specification - Multiple Drawings Ordering Information Descriptions 27/Oct/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
Rugao Dachang Electronic
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Sensitron Semiconductor
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
RNF-100-3/64-CL-SP
TE Connectivity
HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN;
RNF-100-1/4-0-STK
HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 135 Cel; Construction: SINGLE WALL; Additional Features: APPROVAL: VDE;
101A031-100/180-0
HEAT SHRINK CAP; Minimum Operating Temperature: -30 Cel; Material: POLYOLEFIN; Additional Features: REFERENCE STANDARD: BR; VG; Jacket Material: POLYOLEFIN; Maximum Operating Temperature: 105 Cel;
ATUM-16-4-0-SP
HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 110 Cel; Jacket Material: POLYOLEFIN;
15179
Pro-power
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL;
084483-000
HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
B-155-07-S
202F211-71/180-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 135 Cel; Maximum Wire Size: 0 AWG; Jacket Material: SEMI-RIGID POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Material: POLYOLEFIN;
RNF-100-3/16-0-20MM
HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 135 Cel; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN;
ATUM-6/2-0-MS-STK
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Construction: DUAL WALL;
202C621-71-0
TE Connectivity's 202C621-71-0 heat shrink features single wall construction with polyolefin jacket material. It has a max operating temp of 135°C and min operating temp of -55°C. Ideal for applications requiring a min cable entry of 8.1" and max wire size of 0 AWG.
M23053/5-104-0
HEAT SHRINK TUBE; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
B-155-9003
HEAT SHRINK SOLDER SLEEVE; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Jacket Material: CROSSLINKED MODIFIED POLYOLEFIN; Construction: SINGLE WALL;
ATUM-6/2-0-SP
HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Construction: DUAL WALL; Maximum Operating Temperature: 110 Cel;
202K163-25-G03/225-0
HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Jacket Material: ELASTOMER;
761618-000
HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -30 Cel; Minimum Cable Entry: .339 inch; Maximum Cable Entry: 1.031 inch; Maximum Operating Temperature: 105 Cel;
RNF-100-3/64-0-SP
TE Connectivity's RNF-100-3/64-0-SP is a single wall heat shrink tube made of polyolefin. It can withstand temperatures ranging from -55 to 135 °C and is suitable for use with 0 AWG wires. Ideal for various connector applications.
EE1126-000
HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel;
M83519/2-4
Defense Logistics Agency
HEAT SHRINK TUBE; Jacket Material: POLYVIMYLIDENE FLUORIDE;
FIT221-1/4-BLK
Alpha Wire
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED POLYOLEFIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
462A011-25-0
TE Connectivity's 462A011-25-0 heat shrink features single wall construction with elastomer jacket material. It has a max operating temp of 150°C and min of -75°C, suitable for wires up to 0 AWG. Ideal for electrical insulation in various applications.
462A023-25/225-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Jacket Material: ELASTOMER; Maximum Wire Size: 0 AWG; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel;
462A034-25/225-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Construction: DUAL WALL; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG;
462A011-100/86-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 105 Cel;
462A023-25-G07/225-0
HEAT SHRINK 3-WAY JUNCTION; Jacket Material: ELASTOMER; Construction: DUAL WALL;
462A034-100-0
462A034-25-00/42-0
HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER;
462A421-51-0
HEAT SHRINK 3-WAY JUNCTION; Jacket Material: FLUORO-ELASTOMER; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Material: FLUOROELASTOMER; Minimum Operating Temperature: -55 Cel;
462A422-51-0
HEAT SHRINK BOOT; Construction: SINGLE WALL; Jacket Material: ELASTOMER; Material: FLUOROELASTOMER; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel;
462A011-25/225-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Additional Features: REFERENCE STANDARD: VG; Construction: DUAL WALL; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER;
462A011-25/42-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Construction: DUAL WALL;
462A011-25-G05/225-0
HEAT SHRINK 3-WAY JUNCTION; Jacket Material: ELASTOMER; Maximum Wire Size: 0 AWG; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel;
462A011-25-G06/225-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel;
462A034-12-G10-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -55 Cel; Material: FLUOROELASTOMER; Maximum Operating Temperature: 200 Cel;
462A034-12-30-0
HEAT SHRINK BOOT; Jacket Material: FLUORO-ELASTOMER; Minimum Operating Temperature: -55 Cel; Material: FLUOROELASTOMER; Maximum Operating Temperature: 200 Cel; Maximum Wire Size: 0 AWG;
462A214-12-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 200 Cel; Material: FLUOROELASTOMER; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Jacket Material: FLUORO-ELASTOMER;
462A046-12-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 200 Cel; Material: FLUOROELASTOMER; Construction: DUAL WALL; Jacket Material: FLUORO-ELASTOMER; Minimum Operating Temperature: -55 Cel;
462A423-51/164-0
HEAT SHRINK BOOT; Jacket Material: FLUORO ELASTOMER; Minimum Operating Temperature: -55 Cel; Material: FLUOROELASTOMER; Maximum Operating Temperature: 135 Cel;
462A023-12-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -55 Cel; Construction: DUAL WALL; Material: FLUOROELASTOMER; Maximum Operating Temperature: 200 Cel; Jacket Material: FLUORO ELASTOMER;
462A011-12-0
HEAT SHRINK BOOT; Jacket Material: FLUORO ELASTOMER; Construction: DUAL WALL; Material: FLUOROELASTOMER; Maximum Operating Temperature: 200 Cel; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved