Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Rated Voltage: 60 V; Termination Contact Finish: NOT APPLICABLE;
Median Price
$1.650
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$1.300
100+ parts
$1.130
1k+ parts
$0.780
10k+ parts
$0.620
DigiKey
$2.050
$1.477
$1.288
$1.168
Mouser Electronics
$1.480
$1.200
$1.080
Master Electronics
-
$1.510
$1.040
Verical
$2.142
Chip1Stop
$2.130
$1.580
Farnell
$1.180
Newark
$1.540
Powell Electronics
$1.470
$1.190
$0.990
Digiode
$1.720
Vyrian
VNN
IBS Electronics
$2.129
$1.466
TME
$1.260
Nova Conductors
Semicontronic
$1.270
$1.238
$1.232
Corphita
$1.629
ErreBi Group
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Assy Fe
Robosynatics
Lucentia Tech
$9.045
$8.376
Netroflash
Combination Line Connectors 4-1418448-2 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
4-1418448-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Material chg 06/FEB/2023 Multiple Drawings Product Improvement 02/May/2018
PCN Packaging - Packaging chg 08/FEB/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
DT13-48PABCD-R015
TE Connectivity's DT13-48PABCD-R015 is a 48-contact combination line connector with 2 rows, rated at 250V and 13A. With a body length of 2.298" and width of 5.62", it operates b/w -55°C to 125°C, making it ideal for board mounting applications requiring a polarized, right-angle male connector with solder termination.
33471-0201
Molex
Molex 33471-0201 is a Combination Line Connector with 0.604" body length and 0.505" width. Made of GLASS FILLED POLYAMIDE, it has 2 contacts for FEMALE crimp termination. Ideal for cable mounting applications due to its RECEPTACLE design and UL 94-HB flammability rating.
DT06-4S-CE05
TE Connectivity's DT06-4S-CE05 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and min of -55°C. With 4 contacts, it's ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
54201412
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
776164-1
TE Connectivity's 776164-1 is a POLYBUTYLENE TEREPHTHALATE Combination Line Connector with 35 contacts, rated at 17A. It operates b/w -40 to 125 °C and features UL Flammability Code of 94V-0. Ideal for applications requiring a polarized, crimped female plug with strain relief mounting option.
194180026
Molex 194180026 is a COMBINATION LINE CONNECTOR with 12 contacts, FEMALE gender, and CABLE mounting. It uses CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable connectivity.
AT04-12PA-BL05
Amphenol
The Amphenol AT04-12PA-BL05 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring a male receptacle with round pin/socket contact style.
DT06-3S-CE04
TE Connectivity's DT06-3S-CE04 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 3 contacts, UL94V-0 flammability code, and a polarization key. Ideal for applications requiring a polarized, crimped female connector with strain relief on cable mounting.
DT06-2S-EP11
TE Connectivity's DT06-2S-EP11 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, signal current of 13A, and female contact gender. Ideal for cable mounting applications requiring crimp termination with strain relief.
DTP04-2P-E003
TE Connectivity DTP04-2P-E003 is a 1.931x.872x.848" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 25A signal current. Ideal for cable mounting applications requiring male contact gender and receptacle body style with strain relief option.
AT06-6S-MM01
The Amphenol AT06-6S-MM01 is a 3-row combination line connector with 6 contacts, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has dimensions of 1.04" x 0.811" x 1.315".
33472-1206
Molex 33472-1206 is a Combination Line Connector with 0.138" pitch, suitable for commercial applications. Featuring 12 contacts, rated at 22A signal current, it has a temperature range of -40 to 125°C. The connector is designed with polarized housing and crimp termination for secure cable mounting.
174257-2
TE Connectivity's 174257-2 is a Combination Line Connector with dimensions of 1.087" x 0.811" x 1.154". Rated for 12V, it has POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -30 to 105 °C. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
32006-TP2
Eaton Corporation
The Eaton Corporation 32006-TP2 is a Combination Line Connector with dimensions of 1.571" x 1.035" x 1.213". It features 8 contacts in a male gender configuration, suitable for cable mounting applications with two loaded rows. Ideal for compact electronic devices requiring reliable connectivity.
776487-1
TE Connectivity's 776487-1 is a Combination Line Connector with dimensions of 0.997" x 1.445" x 1.055". It has a rated voltage of 250V, insulator material GLASS FILLED POLYBUTYLENE TEREPHTHALATE, and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 4 contacts and a current rating of 13A.
DTM06-6S-E004
TE Connectivity's DTM06-6S-E004 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
1717394-2
TE Connectivity's 1717394-2 is a Combination Line Connector with dimensions of 0.638" x 1.63" x 0.787". Rated for 12V, it has GLASS FILLED POLYPHENYLENE SULFIDE insulator and operates b/w -30 to 105°C. With 24 contacts, it is used in board mounting applications for male connectors with SQ PIN-SKT contact style.
12065686
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; Contact Material: NOT SPECIFIED; Empty Shell: NO;
12162197
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: SHROUDED; MIL Conformity: NO; Total No. of Contacts: 2;
DT04-6P-EP14
TE Connectivity's DT04-6P-EP14 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring male contact gender and receptacle body style with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
4-1418390-1
TE Connectivity 4-1418390-1 is a Combination Line Connector with dimensions 1.693" x 1.012" x 1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 140°C. Ideal for applications requiring a polarized, crimped female connector with UL certification and a current rating of 40A.
4-1418506-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Rated Voltage: 36 V; Body Width: .543 inch;
4-1418437-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Polarization Key: POLARIZED; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
4-1418448-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Rated Voltage: 60 V; Rated Current - Signal: 20 A;
4-1418469-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; EMI Shielded: NO; Mating Contact Row Spacing (inch): 0.236; No. of Ports: 1;
4-1418480-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 4; Mains Connector Rating: 40A; Panel Mount: NO;
4-1418483-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Body Width: .728 inch; Empty Shell: YES;
4-1418883-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.157; No. of Ports: 1; Mixed Contacts: NO;
4-1418479-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 20A; Body Length: 1.732 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved