Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HEAT SHRINK BOOT; Material: ELASTOMER; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
Median Price
$74.671
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS Americas
1+ parts
$30.380
100+ parts
-
1k+ parts
10k+ parts
Arrow
$36.560
$34.640
TTI Europe
$39.306
$37.441
Master Electronics
$64.210
$45.420
$45.200
TE Connectivity
$66.890
Verical
$60.381
Mouser Electronics
$78.510
$63.270
Newark
$91.970
$87.240
WireMasters
$97.105
$89.636
$72.829
Farnell
$126.520
$70.850
Element14
$218.900
$130.750
Nova Conductors
$41.073
Electro Sonic
$70.340
$55.800
$55.520
FDH Electronics
$86.700
$73.787
$59.793
IBS Electronics
$90.055
$63.702
$63.393
Vyrian
VNN
Kallista Electronics Ltd
ACDS - Activité Composants Distribution Service
Jameco Electronics
Continental Prestige Electronics
$40.448
$39.639
Netroflash
$40.252
Argo Parts USA
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Assy Fe
FE SAS
Heat Shrinks 342A034-25-225-0 attributes and parameters. Explore more Heat Shrinks devices from TE Connectivity
Connector Accessory Type:
Jacket Material:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Wire Size:
PCN Design/Specification - Multiple Drawings Ordering Information Descriptions 27/Oct/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SPC TECHNOLOGY/ MULTICOMP
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M23053/8-003-C
Defense Logistics Agency
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE;
202K174-25-02/225-0
TE Connectivity's 202K174-25-02/225-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and 0.618" to 1.378" cable entry. Ideal for applications requiring protection and insulation of cables with up to 0 AWG wire size.
382A023-3-42-0
TE Connectivity's 382A023-3-42-0 heat shrink features dual wall construction with polyolefin jacket material. It has a wide operating temperature range from -55°C to 135°C and accommodates wires up to 0 AWG. Ideal for electrical insulation in various applications.
M23053/5-108-0
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel;
HX-SCE-1K-6.4-50-S1-9
HEAT SHRINK MARKER SLEEVE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 105 Cel;
M23053/4-303-0
HEAT SHRINK TUBE; Construction: DUAL WALL; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
202K142-25-01/86-0
TE Connectivity's 202K142-25-01/86-0 heat shrink features ELASTOMER jacket material, -75 to 150°C temp range, and fits cables up to 17" with 0 AWG wire size. Ideal for electrical insulation in various applications.
RNF-100-3/8-GN-STK
HEAT SHRINK TUBE; Maximum Operating Temperature: 135 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Additional Features: APPROVAL: VDE; Construction: SINGLE WALL;
M23053/13-002-0
HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0; Construction: SINGLE WALL; Minimum Operating Temperature: -40 Cel;
202K132-25-G03/225-0
HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel;
M83519/2-10
HEAT SHRINK SOLDER SLEEVE; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL;
DR-25-1/2-0
HEAT SHRINK TUBE; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
202K142-25-01-0
TE Connectivity's 202K142-25-01-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 17" in diameter. Ideal for applications requiring durable cable protection with a wide temperature tolerance.
NB14124001
HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Construction: SINGLE WALL; Maximum Operating Temperature: 135 Cel; Maximum Wire Size: 0 AWG;
RT555-1-0-SP-CS7501
HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED FLUOROPOLYMER;
362A014-100/86-0
HEAT SHRINK 2-WAY JUNCTION; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -30 Cel; Maximum Wire Size: 0 AWG;
202K1322501-225-0
TE Connectivity's 202K1322501-225-0 heat shrink features dual wall construction with elastomer jacket material. It offers a wide temperature range from -75°C to 150°C, accommodating wire sizes up to 0 AWG. Ideal for applications requiring a min cable entry of 5.9" and max of 15".
RNF-100-1/16-X-STK
HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG;
RT555-1-0-SP
HEAT SHRINK TUBE; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
ATUM-12/4-0-STK
Commscope
HEAT SHRINK TUBE; Construction: DUAL WALL; Wire Gauge (AWG): 0; Maximum Operating Temperature: 110 Cel; Jacket Material: POLYOLEFIN; Maximum Wire Size: 0 AWG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
342A112-25/225-0
HEAT SHRINK BOOT; Additional Features: REFERENCE STANDARD: VG; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel;
342A024-25-0
HEAT SHRINK BOOT; Additional Features: REFERENCE STANDARD: VG; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel;
342A012-25-0
HEAT SHRINK 3-WAY JUNCTION; Jacket Material: ELASTOMER; Maximum Wire Size: 0 AWG; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Operating Temperature: 150 Cel;
342A012-25/225-0
HEAT SHRINK 3-WAY JUNCTION; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG;
342A034-25/86-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER;
342A024-25/225-0
HEAT SHRINK BOOT; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Construction: DUAL WALL;
342A012-25-G05/225-0
HEAT SHRINK 2-WAY JUNCTION; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER;
342A012-25/42-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Jacket Material: ELASTOMER; Construction: DUAL WALL; Material: ELASTOMER;
342A034-3-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel; Material: POLYOLEFIN; Construction: DUAL WALL; Jacket Material: POLYOLEFIN;
342A024-100/180-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 105 Cel;
342A034-25-0
HEAT SHRINK BOOT; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Jacket Material: ELASTOMER; Construction: DUAL WALL; Maximum Operating Temperature: 150 Cel;
342A012-3/42-0
HEAT SHRINK BOOT; Material: POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel;
342A124-4/42-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Maximum Operating Temperature: 135 Cel; Jacket Material: POLYOLEFIN; Material: POLYOLEFIN; Minimum Operating Temperature: -55 Cel;
342A034-100/86-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -30 Cel; Construction: DUAL WALL; Maximum Operating Temperature: 105 Cel;
342A124-12-0
HEAT SHRINK BOOT; Jacket Material: FLUORO-ELASTOMER; Maximum Operating Temperature: 200 Cel; Material: FLUOROELASTOMER; Construction: DUAL WALL; Minimum Operating Temperature: -55 Cel;
342A034-25/42-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Construction: DUAL WALL; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved