Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 2041441-2 is a Telecom & Datacom Connector with Matte Tin finish, Liquid Crystal Polymer insulator, and Nickel shell. It operates b/w -40 to 85°C, suitable for board mounting applications in telecom and datacom systems. Rated at 0.5A signal current, UL recognized with 20 contacts for solder termination.
Median Price
$3.150
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$1.927
100+ parts
$1.752
1k+ parts
$1.633
10k+ parts
-
Arrow
$3.054
$2.822
$2.469
Chip1Stop
Element14
$6.260
$4.960
$4.080
Powell Electronics
$8.181
Master Electronics
$2.960
$2.550
$2.510
Verical
$4.498
$3.848
DF Sales Co.
$1.950
Nova Conductors
$2.339
Digiode
$2.901
Component Sense
Electro Sonic
$2.860
$2.340
$2.180
Vyrian
VNN
TME
Chip Stock
Semtec, LLC
Netroflash
Semicontronic
$2.520
$2.457
$2.444
Corphita
$2.749
Continental Prestige Electronics
$3.990
$2.580
$2.130
Perfect Parts
Authorized Procurement Solutions
Argo Parts USA
Formix International (Excess)
Provides high conductivity and corrosion resistance, ensuring reliable connections and durability.
Offers excellent electrical insulation properties and resistance to high temperatures, making it suitable for demanding applications.
Can withstand high temperatures, ensuring stable performance in various operating conditions.
Provides good mechanical strength and durability, enhancing the overall reliability of the connector.
Allows for compact design and dense packaging of connectors on the board, saving space and improving efficiency.
Telecom & Datacom Connectors 2041441-2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2041441-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - Obsolete 04/JAN/2024
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
67068-7041
Molex
Molex 67068-7041 USB connector features 2 rows, 4 contacts, and TIN termination finish. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The connector has a body length of 0.472", insulation resistance of 1Gohm, and operates b/w 0-50°C.
2024100002
Molex 2024100002 USB connector with 24 contacts, gold finish, and polyethylene insulator. Ideal for telecom/datacom applications requiring waterproof surface mount connectors on boards/panels. Female receptacle with right-angle mounting style ensures secure connections in various environments.
USBR-B-S-S-O-TH
Samtec
The Samtec USBR-B-S-S-O-TH is a USB connector with 4 contacts, right-angle mounting style, and high-temp thermoplastic insulator. It has a durability of 1500 cycles and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications due to its nickel shell finish and solder termination type.
UJ2-MIBH-4-MSMT-TR
Cui Devices
UJ2-MIBH-4-MSMT-TR by CUI Devices is a USB connector with 5 contacts, rated at 1.8A signal current. It features liquid crystal polymer insulation, 10000 cycle durability, and operates b/w -25 to 85°C. Ideal for telecom & datacom applications requiring a right-angle board mount option.
5558872-1
TE Connectivity
TE Connectivity's 5558872-1 is a Telecom & Datacom Connector with 0.455" body length, 0.655" body width, and 0.65" body depth. It features Matte Tin termination finish and PBT-POLYESTER insulator material. Ideal for telecom applications with 4 contacts, rated at 1.5A signal current, and operating temperature range of -40 to 85°C.
10103594-0001LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10103594-0001LF USB connector features a body length of 0.317", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom applications, this right-angle receptacle with gold over nickel termination is durable for up to 10,000 cycles.
12401610E4#2A
Amphenol
The Amphenol 12401610E4#2A is a telecom & datacom connector with dimensions of 0.361" x 0.129" x 0.413". It features 24 contacts, rated for 5A signal current, UL94V-0 flammability. This female USB connector has a right-angle mounting style and surface mount termination, suitable for board applications.
J00-0045NL
Pulse Electronics
J00-0045NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts. Featuring Matte Tin (Sn) finish, it has a 0.64" body length and 0.545" width. Ideal for board and panel mounting in telecom and datacom applications due to its POLYETHYLENE insulator material and right angle mounting style.
5555153-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
RJE72-188-1341
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
RJHSE-5080
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
1-1705951-1
TE Connectivity 1-1705951-1 is a Telecom & Datacom Connector with 0.598" body length, 0.453" width, and Tin (Sn) termination finish. It has an insulation resistance of 500M ohm and operates b/w -40 to 105°C. Ideal for telecom applications requiring a durable male connector with right-angle mounting option.
USB4105-GF-A-
Global Connector Technology
USB4105-GF-A- by Global Connector Technology is a USB connector with 24 contacts, rated for 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -40 to 85°C.
RJSAE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Length: .1 inch; Reference Standard: UL; Insulator Color: BLACK;
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
6-2301994-0
TE Connectivity 6-2301994-0 is a EMI shielded connector with Liquid Crystal Polymer insulator. It has 8 contacts, board mounting option, and solder termination type. Ideal for telecom & datacom applications due to its right angle mounting style and UL flammability rating of 94V-0.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
HDRA-E68LFDT1
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
74320-9004
Molex 74320-9004 is a telecom/datacom connector with 24 contacts, 0.075" pitch, and 1.45" body length. It has an insulation resistance of 1Gohm and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels.
1703820002
Molex 1703820002 is a Telecom & Datacom Connector with 0.433" body length, 0.211" width, and 300VAC dielectric voltage. It has 20 contacts, UL94V-0 rated, suitable for board mounting in telecom applications. Operating temp range -40 to 85°C with durability of 100 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2041126-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Panel Mount: NO; Mixed Contacts: NO; Filter Feature: NO;
2041411-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Type: BOARD; Total No. of Contacts: 8; Plating Thickness (inch): 5u;
2041517-1
TE Connectivity's 2041517-1 USB connector has a body size of 0.303" x 0.153" x 0.354", made of POLYAMIDE9T. With 5 contacts, it is rated for 1A signal current and can withstand temperatures from -40 to 85°C. Ideal for telecom/datacom applications, this connector offers durability with 5000 cycles and features a solder termination type.
2041441-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO; DIN Conformance: NO;
2041376-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: YES; IEC Conformity: NO; Plating Thickness (inch): 30u;
2041441-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; Shell Finish: NICKEL; Mains Connector Rating: .5A;
2041529-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; Maximum Operating Temperature (Cel): 85; Mounting Style: RIGHT ANGLE;
2041035-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Body Depth: .445 inch;
2041035-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; DIN Conformance: NO; Terminal Length: .138 inch; MIL Conformity: NO;
2041086-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; Insulator Color: BLACK; Plating Thickness (inch): 6u;
2041307-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 1A;
2041376-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; Panel Mount: NO; Insulator Material: GLASS FILLED POLYAMIDE46;
2041492-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Filter Feature: NO; Contact Material: PHOSPHOR BRONZE; Maximum Operating Temperature (Cel): 85;
2041556-1
USB CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Material: POLYETHYLENE; Mains Connector Rating: 1A; Minimum Operating Temperature: -40 Cel;
2041517-2
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE; Rated Current - Signal: 1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved