Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1888251-2 is a EMI shielded telecom & datacom connector with PBT-POLYESTER insulator. It has 8 contacts, rated current of 0.6A, and operates b/w -40 to 85°C. Ideal for board and panel mounting in applications requiring high EMI protection and signal integrity.
Median Price
$23.950
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Verical
1+ parts
$19.950
100+ parts
$18.920
1k+ parts
-
10k+ parts
TE Connectivity
$21.210
$19.360
Mouser Electronics
$25.490
$18.860
$17.630
DigiKey
$28.490
$20.584
$18.377
Newark
$29.630
$23.080
Chip1Stop
$17.600
$14.400
Farnell
Master Electronics
$49.380
$16.780
TTI
Powell Electronics
$19.040
Digiode
$15.760
Nova Conductors
$17.664
VNN
Rapid Electronics
IBS Electronics
$18.025
Vyrian
TME
$19.190
Bristol Electronics
Corphita
$14.931
Kepictronics
Perfect Parts
Assy Fe
This feature helps in reducing electromagnetic interference, ensuring reliable signal transmission in noisy environments.
Compact body design enables easy installation in tight spaces.
PBT-POLYESTER insulator material offers good electrical insulation properties and heat resistance.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance.
The low minimum operating temperature allows this connector to function effectively in cold environments.
A thick plating thickness of 50u ensures corrosion resistance and long-term durability.
TIN shell finish provides a protective coating against environmental factors, extending the lifespan of the connector.
Specifically designed for telecom and datacom applications, making it a suitable choice for these industries.
UL 94V-0 flammability rating indicates that the connector meets strict safety standards for fire resistance.
With a rated current of 0.6A for signal transmission, this connector can handle typical signal loads effectively.
Black insulator color provides a professional and sleek appearance to the connector.
Compliance with UL standards ensures quality, safety, and reliability of the product.
Availability of 8 contacts allows for multiple connections, offering versatility in connectivity options.
Single connector setup simplifies installation and reduces complexity in the system.
Supports both board and panel mounting, offering flexibility in installation methods.
Copper alloy shell material provides a robust and conductive housing for the connector.
1.02mm terminal pitch offers a suitable spacing for connections, ensuring compatibility with standard components.
Capable of handling mains voltage ratings of 115/230VAC for power applications.
Press fit termination type allows for easy and secure connections without the need for soldering.
JACK body or shell style provides a popular and widely compatible design for various applications.
Right angle mounting style enables space-saving installation and facilitates cable routing in confined spaces.
Terminal length of 0.091 inch offers a suitable connection length for secure contact points.
Telecom & Datacom Connectors 1888251-2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1888251-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Protek Devices
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Littelfuse
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Lite-on Semiconductor
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1734366-3
TE Connectivity USB Connector 1734366-3 with POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom/datacom applications, featuring SOLDERABLE RETENTION CLIPS for board mounting and rated at 1A signal current with FEMALE contact gender.
RJHSE-3381
Amphenol
RJHSE-3381 by Amphenol is a telecom & datacom connector with 8 contacts, made of copper alloy. It features matte tin termination finish, gold mating contact finish over nickel, and polarization key for polarized housing. Ideal for board and panel mounting in commercial applications with operating temperatures from -55°C to 85°C.
PCR-E20FS+
Honda Tsushin Kogyo
PCR-E20FS+ by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" mating pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and NICKEL shell finish. Ideal for commercial applications requiring a reliable female contact style with solder termination on a rectangular pattern.
RJHSE-3P80
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
79610-102
AMPHENOL ICC
Amphenol Icc 79610-102 is a Telecom & Datacom Connector with 20 contacts, rated at 3A signal current. It features POLYCARBONATE insulator, right-angle mounting style, and solder termination type. With a mating contact pitch of 0.1 inch, it's ideal for commercial applications requiring durable connectors with a polarization key for secure connections.
1-5406299-1
TE Connectivity 1-5406299-1 is a Telecom & Datacom Connector with EMI Shielding. It features Insulation Resistance of 500MΩ, UL Flammability Code 94V-0, and rated for 750 Cycles durability. Ideal for board and panel mounting applications requiring reliable signal connections in telecom and datacom systems.
632723300011
Wuerth Elektronik & Kg
632723300011 by Wurth Elektronik is a USB connector with 24 contacts, gold-plated brass material, and black insulator. It has a durability of 10000 cycles and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring a right-angle board mounting option with locating posts.
RJMG233022610ER
Amphenol RJMG233022610ER USB connector features gold mating contacts, tin termination finish, and polybutylene terephthalate insulator. Ideal for telecom/datacom applications, it offers a right-angle mounting style on the board with female-to-female contact gender.
2171800001
Molex
5558342-1
TE Connectivity 5558342-1 is a Telecom & Datacom Connector with EMI shielding. It has 6 contacts, rated for 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durable connectors with split board lock mounting option.
UJC-HP-3-SMT-TR
Cui Devices
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
56579-0576
The Molex 56579-0576 is a USB connector with gold termination, glass-filled polyphthalamide insulator, and copper alloy contacts. It has a durability of 5000 cycles and operates b/w -20 to 85°C. Ideal for telecom & datacom applications, featuring a polarized housing and rated current of 1A.
449150021
Molex 449150021 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. It's used for telecom applications, has UL94V-0 flammability rating, and supports 8 contacts with wire termination.
48037-1000
The Molex 48037-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this connector has a durable steel shell, surface mount termination, and is rated for 1500 cycles.
USB4085-GF-A
Global Connector Technology
USB4085-GF-A by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable stainless steel shell and operates b/w -40°C to 85°C.
09455511102
Harting Electronics & Kg
09455511102 by Harting Electronics & Kg is a Telecom & Datacom Connector with dimensions of 0.619" x 2.953" x 0.734". It features TIN OVER NICKEL termination, POLYBUTYLENE TEREPHTHALATE insulator, and COPPER ALLOY shell material. Ideal for board mounting applications in telecom and datacom systems, it has a rated current of 1.5A and operates b/w -40°C to 70°C.
74320-4000
The Molex 74320-4000 is a telecom and datacom connector with a body length of 0.145", body width of 0.39", and body depth of 0.454". It is used for board and panel mounting in commercial applications, with a rated current of 3A and an operating temperature range from -20°C to 85°C.
1734328-1
TE Connectivity's 1734328-1 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and operating temperature range from -40 to 85°C. Ideal for telecom/datacom applications, this connector has a total of 5 contacts, surface mount termination type, and durability of 5000 cycles.
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
87520-0010ALF
The Amphenol Communications Solutions 87520-0010ALF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a solder termination type and is rated for 1500 cycles durability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1888250-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
1888507-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Reference Standard: UL; Panel Mount: NO;
1888250-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: YES;
1888507-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Panel Mount: NO; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature (Cel): 70;
1888653-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
1888861-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; No. of Rows Loaded: 1;
1888251-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 8;
1888250-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 50u;
1888174-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; Plating Thickness (inch): 30u;
1888506-2
TE Connectivity's 1888506-2 is an EMI shielded telecom and datacom connector with a body depth of 0.129 inch. It has a max operating temperature of 70°C and a min operating temperature of -30°C. This right angle jack connector, made of copper alloy, is suitable for board and panel mounting applications.
1888654-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Reference Standard: UL; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO;
1888811-1
TE Connectivity 1888811-1 is a Telecom & Datacom Connector with 0.744" body length, 0.702" width, and 0.809" depth. It features POLYETHYLENE insulation material, 100000000 ohm insulation resistance, and operates b/w -55°C to 105°C. Ideal for board mounting with 38 contacts in a polarized housing for signal currents up to 0.5A.
1888250-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: BOARD AND PANEL;
1888251-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Color: BLACK;
1888250-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Board Mounting Option: SPLIT BOARD LOCK;
1888376-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Finish: NICKEL; Mounting Style: RIGHT ANGLE; Maximum Operating Temperature (Cel): 85;
1888251-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Terminal Length: .091 inch; Terminal Pitch (mm): 1.02;
1888507-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; Contact Material: NOT SPECIFIED; No. of Ports: 1;
1888566-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85; No. of Ports: 1;
1888654-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .163 inch; Termination Type: PRESS FIT; Mounting Type: BOARD AND PANEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved