Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Headers & Edge Type Connectors 1775801-64 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Connector Type:
Mating Contact Finish:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
1775801-64 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
4554
Jw Miller Magnetics
Other Semiconductors;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
76155-5107
Molex
The Molex 76155-5107 is a board connector with 12 loaded rows and PCB contact row spacing of 1.3462mm. It features matte tin over nickel termination, glass-filled liquid crystal polymer insulator material, and copper alloy contacts. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
XHP-4
J S T Mfg
XHP-4 by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.098" pitch, 1000VAC voltage withstand, and 3A signal current rating. It features POLYAMIDE6 insulation, -25 to 85°C operating range, and UL94V-0 flammability. Ideal for CABLE mounting applications requiring FEMALE SQ PIN-SKT contacts with CRIMP termination.
22-05-2051
Molex 22-05-2051 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 5 contacts, solder termination type, and white polyamide insulator material.
B3PS-VH(LF)(SN)
B3PS-VH(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.156" pitch, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a temperature range of -25 to 85 °C and features BRASS contacts with Tin finish for signal current up to 10A. Ideal for PCB applications requiring right-angle mounting and solder termination.
22-27-2041
Molex 22-27-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features matte tin finish, 1500VAC dielectric voltage, and -40 to 105°C operating temperature range. With UL certification and red insulator color, it offers reliable connectivity for various electronic devices.
15-91-0100
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
52271-1079
Molex 52271-1079 is a FFC/FPC connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. Ideal for board mounting applications requiring durability, reliability, and high temperature tolerance up to 85°C.
DF11-10DP-2DSA(01)
Hirose Electric
The Hirose Electric DF11-10DP-2DSA(01) is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 50 cycles and insulation resistance of 1Gohm. With a dielectric voltage rating of 650VAC, this connector is ideal for PCB mounting in various electronic devices.
M20-9990206
Harwin Plc
M20-9990206 by Harwin PLC is a board connector with 0.1" mating contact pitch, 1000000000000 ohm insulation resistance, and 750VAC dielectric voltage. It is ideal for applications requiring a durable, high-temperature resistant male receptacle connector with solder termination and 3A signal current rating.
B2P-VH-FB-B(LF)(SN)
B2P-VH-FB-B(LF)(SN) by J S T Mfg is a 1-row, straight board connector with a contact pitch of 0.156 inches. It has a body length of 0.386 inch and width of 0.382 inch. This connector is commonly used in applications requiring male contacts and solder termination.
22-11-2122
Molex 22-11-2122 is a board connector with 12 contacts, 0.1" pitch, and 4A signal current rating. Ideal for commercial applications, it features POLYAMIDE insulation, BRASS contacts with Tin finish, and operates b/w 0-75°C temperature range.
S3B-XH-A-GU
S3B-XH-A-GU by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It features a terminal pitch of 2.5mm, suitable for right angle mounting applications. This UL 94V-0 rated connector is ideal for various electronic devices requiring secure soldered connections.
VHR-5N-BK
VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.
5055960401
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
3674
Lumberg Connect
3674 by Lumberg Connect is a BOARD CONNECTOR with 25 contacts, Tin (Sn) finish. It has a Terminal Pitch of 5mm and UL Flammability Code of 94V-0. Ideal for applications requiring RIGHT ANGLE mounting in Headers & Edge Type Connectors.
280371-2
TE Connectivity
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
51700
AMPHENOL ICC
Amphenol Icc's 51700 board connector features mixed contacts, UL 94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male contact gender, press fit or solder termination, and straight mounting style.
B6B-PH-K-S(LF)(SN)
B6B-PH-K-S(LF)(SN) by J S T Mfg is a 6-pin board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a straight mounting style and press fit termination type.
1410140-1
TE Connectivity's 1410140-1 is a board connector with 144 contacts, featuring a mating contact pitch of 0.071", liquid crystal polymer insulator material, and tin/lead termination finish. With a rated current of 1A, it operates b/w -55°C to 105°C and is ideal for applications requiring high-density connections on PCBs in electronic devices.
B4B-XH-AM(LF)(SN)
B4B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring male connectors with solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved