Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THREE PHASE EMI FILTER; Rated Current: 1600 A; Rated Voltage: 690 V; Approvals (V): UL; Length: 400 mm; Minimum Operating Temperature: -10 Cel;
Median Price
$2,750.000
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Verical
1+ parts
$2,557.970
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
Master Electronics
$6,419.660
PEI Genesis
Heilind Electronics
Assy Fe
EMI Mains Filters 1600APH12P attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Dc Components
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
FN2090B-20-08
Schaffner Holding Ag
Schaffner Holding Ag's FN2090B-20-08 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 22.4A rated current. Operating at -25 to 100°C, it offers high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications in various industries due to its compact dimensions of L94.0xB56.0xH45.4mm.
6ET1
TE Connectivity
The TE Connectivity 6ET1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 16 dB at the min frequency and 42 dB at the max frequency. With a rated voltage of 250V, it is ideal for panel mounting applications in electronics to reduce electromagnetic interference.
B82722J2302N001
TDK
The TDK B82722J2302N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
6EDP
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 6 A; Length: 36.6 mm; Insertion Loss At Minimum Frequency: 10 dB; Insertion Loss At Maximum Frequency: 40 dB;
SC-02-20G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Diameter (mm): 17.5; Dimensions: D17.5XH14.0 (mm)/D0.689XH0.551 (inch); Height: 14 mm;
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
10VS1
The TE Connectivity 10VS1 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 15-40 dB. Rated for 250V and 10A, it operates at -10 to 40°C with dimensions of L84.8xB52.8xH38.9mm. Ideal for single-phase applications requiring effective filtering up to 2MHz frequency range.
FN9246-10-06
SINGLE PHASE EMI FILTER;
30DKCS5B
Delta Electronics
30DKCS5B by Delta Electronics is a single-phase EMI filter with a rated voltage of 250V and a max leakage current of 2mA. It is UL, CSA, and VDE approved and has a rated current of 30A. This panel mount filter is suitable for applications requiring EMI mains filtering.
7448030417
Wuerth Elektronik & Kg
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
SC-02-20GJ
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 17.0; Length: 17.5 mm;
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
3-103-708
Schurter Ag
Schurter Ag's 3-103-708 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. With 10A rated current, it operates at -40 to 100°C and has max leakage current of 0.5mA. Ideal for panel mounting in applications requiring effective EMI filtering at 50/60Hz frequency.
1600APS12L
TE Connectivity's 1600APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 1600A. With a max operating temperature of 50°C, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
SCF31B-180-S1R7A013J
KEMET Corporation's SCF31B-180-S1R7A013J is a UL approved EMI mains filter with 500V rated voltage and 18A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for three-phase applications, this filter is mounted through hole and measures 32mm x 46.5mm x 44mm in dimensions.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
RN222-4-02-3M3
RN222-4-02-3M3 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L31.0xB18.0xH29.3 mm, it is designed for through-hole mounting in various electronic systems.
RSEL-2002WL
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 50 mm; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel;
S8V-NFS203
Omron
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved