Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1379029-5 is a Combination Line Connector with dimensions of 0.65" x 0.693" x 0.421". It has a rated voltage of 24V and can operate b/w -40 to 120°C. With UL certification, it features 4 contacts, female gender, and is ideal for cable mounting applications.
Median Price
$0.392
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.395
100+ parts
$0.303
1k+ parts
$0.270
10k+ parts
$0.252
DigiKey
$0.550
$0.394
$0.335
$0.314
Mouser Electronics
$0.313
$0.284
Verical
-
TE Connectivity
$0.760
$0.420
$0.190
TTI Europe
$0.306
$0.230
Master Electronics
$0.389
$0.267
PEI Genesis
Chip1Stop
$0.567
Farnell
$0.293
Powell Electronics
$0.321
$0.299
Nova Conductors
$0.339
Digiode
$0.428
VNN
Vyrian
Rapid Electronics
TME
$0.271
IBS Electronics
$0.296
Q Components
Argo Parts USA
$0.329
Continental Prestige Electronics
$0.333
Netroflash
$0.322
$0.316
Corphita
$0.405
EMSNET (Excess)
Authorized Procurement Solutions
Compact size allows for easy installation in tight spaces.
Suitable for a variety of electrical applications.
Provides good electrical insulation and durability.
Can withstand high temperatures, making it suitable for various environments.
Capable of functioning in cold temperatures as well.
Allows for multiple connections in one connector.
Easy to install on cables for secure connection.
Meets safety standards for flammability.
Combination Line Connectors 1379029-5 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
1379029-5 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
15326842
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
12047931
Aptiv
Aptiv's 12047931 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, male gender, and crimp termination. Designed for cable mounting, it mates with 12047937 for various automotive applications.
AT06-6S-OMGRY
Amphenol
The Amphenol AT06-6S-OMGRY is a combination line connector with 6 contacts, rated for 13A signal current. With a temperature range of -55 to 125°C, it features female crimp termination and plug body style. Ideal for cable mounting applications requiring reliable connectivity in harsh environments.
DT04-12PB-L012
TE Connectivity's DT04-12PB-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and panel mounting option.
DTP04-4P-P018
TE Connectivity's DTP04-4P-P018 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, meeting UL standards. With a male contact gender, this panel-mounted receptacle has one connector and features polarization key for secure mating in various applications.
ATM04-2P-SR01GY
Amphenol's ATM04-2P-SR01GY is a male combination line connector with 2 contacts, rated at 7.5A. Made of polyethylene, it operates b/w -55°C to 125°C and has a body size of 0.654" x 0.638" x 2". Ideal for cable mounting applications requiring reliable signal transmission in various industries.
DTM04-12PA-E003
TE Connectivity's DTM04-12PA-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 7.5A and 250V, suitable for applications requiring a polarized, UL-rated connector with operating temperatures from -55 to 125°C.
DTP04-4P-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: RND PIN-SKT; Mixed Contacts: NO; Body Length: 1.063 inch;
12015788
Aptiv's 12015788 is a COMBINATION LINE CONNECTOR with 0.814" Body Length and 1.417" Body Depth. It features 2 Rows Loaded, 4 Contacts, FEMALE Gender, and RND PIN-SKT Style. Ideal for automotive applications requiring reliable electrical connections in limited space.
AT06-12SA-MM01
The Amphenol AT06-12SA-MM01 is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating temperature range from -55 to 125°C, and dimensions of 1.791" x 0.815" x 1.303". Ideal for cable mounting applications requiring female contact gender and round pin/socket style connections.
DT04-3P-EE01
TE Connectivity's DT04-3P-EE01 is a 2-row, 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
5007620481
Molex
Molex 5007620481 is a COMBINATION LINE CONNECTOR with 48 contacts, Tin (Sn) - Nickel (Ni) finish. It uses SOLDER termination and mounts on BOARD. Ideal for applications requiring reliable male connectors like mating with 64320-1311, 64320-3311.
DT06-12SC-CE05
TE Connectivity's DT06-12SC-CE05 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
PL182X-61-4
The Amphenol PL182X-61-4 is a combination line connector with dimensions of 1.039" x 0.933" x 1.634". It has a max operating temperature of 125°C and can handle a rated current of 60A. This male plug connector is commonly used in cable applications requiring crimp termination.
AT06-12SA-OMGRY
The Amphenol AT06-12SA-OMGRY is a Combination Line Connector with 12 contacts, rated for 13A signal current. It features glass-filled polyamide66 insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug connector with round socket contact style.
AW6S
COMBINATION LINE CONNECTOR;
3-1418469-1
TE Connectivity's 3-1418469-1 is a Combination Line Connector with dimensions of 1.693"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With UL certification, it features 6 contacts at 0.118" spacing, ideal for cable mounting applications at up to 20A signal current.
ATM15-4P-BM03
The Amphenol ATM15-4P-BM03 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring female contact gender and SQ PIN-SKT style connectors.
DT06-4S-E008
TE Connectivity's DT06-4S-E008 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL flammability rating of 94V-0.
AT06-2S-GRN
The Amphenol AT06-2S-GRN is a combination line connector with 2 contacts, rated for 13A signal current. Featuring a body size of 0.713" x 0.591" x 1.126", it uses polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting, this female plug connector with round pin sockets is suitable for various applications requiring reliable signal connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1379674-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Empty Shell: YES; Panel Mount: NO;
1379658-1
TE Connectivity's 1379658-1 is a Combination Line Connector with dimensions of 0.465" x 0.748" x 0.396". Rated for 14V, it operates b/w -40 to 100°C. With UL certification, it has 4 female contacts and is ideal for cable mounting applications.
13795018
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Maximum Operating Temperature (Cel): 125; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
Aptiv's 13795018 Combination Line Connector features 24 FEMALE contacts in a 2-row configuration. With dimensions of 2.82" x 1.206" x 1.957", it is made of GLASS FILLED POLYBUTYLENE TEREPHTHALATE, suitable for applications requiring a max operating temperature of 125°C.
1379678-1
TE Connectivity 1379678-1 is a Combination Line Connector with dimensions of 0.906"x1.335"x.579". It has 16 contacts, rated at 14V/7.5A, suitable for cable mounting applications. Insulated with POLYBUTYLENE TEREPHTHALATE, it operates b/w -40 to 100°C and complies with UL standards.
1379165-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; DIN Conformance: NO; IEC Conformity: NO;
1379165-7
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Board Mounting Option: BOARD LOCK;
1379165-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; EMI Shielded: NO; Mounting Type: BOARD;
1379165-1
TE Connectivity's 1379165-1 is a Combination Line Connector with dimensions of 0.803" x 0.339" x 0.831". Rated at 12V, it uses GLASS FILLED POLYCARBONATE insulator material and has a max operating temperature of 85°C. Ideal for board mounting applications, this connector features a total of 4 contacts and is UL certified.
1379165-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Maximum Operating Temperature (Cel): 85; Terminal Pitch (mm): 2.54;
1379165-5
TE Connectivity's 1379165-5 is a COMBINATION LINE CONNECTOR with dimensions of 0.803" x 0.339" x 0.736". It has a rated voltage of 12V, operating temperature range from -40 to 85°C, and UL flammability rating of 94-HB. Ideal for board mounting applications, this connector features 4 contacts with terminal pitch of 2.54mm and solder termination suitable for mains connector ratings up to 115/230VAC.
1379675-1
TE Connectivity's 1379675-1 is a combination line connector with dimensions of 0.732" x 1.335" x 0.579". It has a rated voltage of 14V and can operate in temperatures ranging from -40°C to 100°C. This connector is commonly used in cable mounting applications and has a total of 12 contacts.
1379114-1
TE Connectivity's 1379114-1 is a Combination Line Connector with dimensions of 1.587" x 0.669" x 0.799". It has an insulation resistance of 50M ohm, rated for 12V, and operates b/w -40 to 85°C. Ideal for board mounting with UL standard compliance, it features a total of 12 contacts arranged in S0P12 configuration.
1379671-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; EMI Shielded: NO; MIL Conformity: NO;
1379114-3
TE Connectivity's 1379114-3 is a combination line connector with dimensions of 1.587" x 0.669" x 0.799". It has an insulation resistance of 50MΩ and a rated voltage of 12V. This connector, made of LCP, is commonly used in commercial applications for panel mounting and solder termination.
1379325-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 2.717 inch; UL Flammability Code: 94-HB; IEC Conformity: NO;
1379102-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Filter Feature: NO; No. of Ports: 1;
1379029-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Polarization Key: POLARIZED; Body Depth: .421 inch; Mains Connector Rating: 7.5A;
1379029-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Polarization Key: POLARIZED; Minimum Operating Temperature: -40 Cel;
1379029-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 7.5 A; Termination Contact Finish: NOT APPLICABLE; UL Flammability Code: 94-HB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved