Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1379114-3 is a combination line connector with dimensions of 1.587" x 0.669" x 0.799". It has an insulation resistance of 50MΩ and a rated voltage of 12V. This connector, made of LCP, is commonly used in commercial applications for panel mounting and solder termination.
Median Price
$1.484
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.260
100+ parts
$1.631
1k+ parts
$1.441
10k+ parts
$1.234
Arrow
-
$0.859
Verical
TE Connectivity
$2.110
$0.840
Nova Conductors
$1.184
Digiode
$2.052
Vyrian
Bristol Electronics
TME
$1.290
VNN
Semicontronic
$0.860
$0.838
$0.834
Continental Prestige Electronics
$1.092
$1.070
Argo Parts USA
Aranea Global
$1.161
$1.114
Corphita
$1.944
AZTECH Wire
$5.420
$5.210
$5.100
$5.000
Infinite Electronics LLP (Excess)
Perfect Parts
Kepictronics
Futuretech Components
Assy Fe
The compact size of the body allows for easy installation in tight spaces.
High insulation resistance helps prevent electrical leakage and ensures reliable performance.
Suitable for low voltage applications, providing safe and efficient connectivity.
LCP offers excellent thermal and mechanical properties, making the connector durable and reliable.
The connector can withstand high temperatures, making it suitable for a wide range of operating conditions.
Solder termination ensures a secure and durable connection between the connector and the circuit board.
The straight mounting style allows for easy installation on a panel or board.
Commercial reliability ensures consistent performance over time, making the connector a reliable choice for various applications.
Combination Line Connectors 1379114-3 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Voltage:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1379114-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Unitrode
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DT04-2P-CE04
TE Connectivity's DT04-2P-CE04 is a 2.251" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DRC12-40PAE
TE Connectivity's DRC12-40PAE is a 40-contact combination line connector with nickel termination, GLASS FILLED POLYPHENYLENE SULFIDE insulator, and UL 94V-0 flammability rating. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a polarized male receptacle with strain relief option.
194180029
Molex
Molex 194180029 is a COMBINATION LINE CONNECTOR with 16 contacts, FEMALE gender, and RECEPTACLE body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity in compact spaces.
DT04-12PA-CE07
TE Connectivity's DT04-12PA-CE07 is a Combination Line Connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
DTM04-4P-E005
TE Connectivity's DTM04-4P-E005 is a 1.77" x 0.756" x 0.772" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. It operates b/w -55°C to 125°C, UL certified with polarized design for one connector application in cable mounting setups.
2377780-1
TE Connectivity's 2377780-1 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It features 4 loaded rows, operating from -40 to 120 °C, and FEMALE contact gender. Ideal for applications requiring a polarized connector with 115/230VAC mains rating and cable mounting type.
154719
TE Connectivity 154719 is a Combination Line Connector with 0.96" body length, GLASS FILLED POLYAMIDE66 insulator, and -40 to 105 °C operating temperature range. It features UL 94V-2 flammability code, polarized key, and UL reference standard. Ideal for cable mounting applications at 115/230VAC mains connector rating.
DT04-6P-EP14
TE Connectivity's DT04-6P-EP14 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring male contact gender and receptacle body style with strain relief option.
DTM06-08SA-EE04
TE Connectivity's DTM06-08SA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring UL-certified connectors with polarized design and strain relief option.
AT06-12SA-SRBK
Amphenol
AT06-12SA-SRBK by Amphenol is a combination line connector with dimensions of 1.772" x 0.827" x 1.713". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This connector has 12 contacts, rated current of 13A, and is commonly used for cable mounting applications.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
1473416-1
TE Connectivity's 1473416-1 is a Combination Line Connector with dimensions of 1.266" x 1.268" x 1.36". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40°C to 125°C. With a total of 26 contacts, it is used in cable mounting applications at mains connector ratings of 115/230VAC.
ATM04-2P
The Amphenol ATM04-2P is a male combination line connector with 2 contacts. It has a rated signal current of 7.5A and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with ATM04-2S receptacle connectors, featuring round pin-socket contact style.
1-967624-1
TE Connectivity's 1-967624-1 is a combination line connector with a mating contact pitch of 0.197 inches. It has a body length of 1.228 inches and depth of 1.043 inches, making it suitable for cable mounting applications. With its glass-filled polybutylene terephthalate insulator material and crimp termination type, this connector offers reliable performance in commercial settings.
1-1564416-1
TE Connectivity 1-1564416-1 is a Combination Line Connector with dimensions 1.673" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male connectors with polarized polarization key and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material.
DTM06-4S-E004
TE Connectivity's DTM06-4S-E004 is a 2-row, 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with crimp termination.
HVSL800062A135
Amphenol's HVSL800062A135 is a 3.185" x 1.953" x 3.169" combination line connector with polyethylene insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features crimp termination for male contacts. Ideal for cable mounting applications per EN and UL standards.
DTM1312PA12PBGR01
TE Connectivity's DTM1312PA12PBGR01 is a Combination Line Connector with 24 contacts, rated voltage of 250V, and signal current of 7.5A. Ideal for board mounting applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
1-480699-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: MATE-N-LOK; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
1718488-1
TE Connectivity's 1718488-1 is a Combination Line Connector with dimensions of 1.512"x.925"x.435". Rated for 36V, it operates b/w -40 to 120°C and has UL Flammability Code 94-HB. With 7 contacts, it is used in cable mounting applications as a polarized receptacle connector with SQ PIN-SKT contact style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1379674-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Empty Shell: YES; Panel Mount: NO;
1379658-1
TE Connectivity's 1379658-1 is a Combination Line Connector with dimensions of 0.465" x 0.748" x 0.396". Rated for 14V, it operates b/w -40 to 100°C. With UL certification, it has 4 female contacts and is ideal for cable mounting applications.
13795018
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Maximum Operating Temperature (Cel): 125; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
Aptiv
Aptiv's 13795018 Combination Line Connector features 24 FEMALE contacts in a 2-row configuration. With dimensions of 2.82" x 1.206" x 1.957", it is made of GLASS FILLED POLYBUTYLENE TEREPHTHALATE, suitable for applications requiring a max operating temperature of 125°C.
1379678-1
TE Connectivity 1379678-1 is a Combination Line Connector with dimensions of 0.906"x1.335"x.579". It has 16 contacts, rated at 14V/7.5A, suitable for cable mounting applications. Insulated with POLYBUTYLENE TEREPHTHALATE, it operates b/w -40 to 100°C and complies with UL standards.
1379165-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; DIN Conformance: NO; IEC Conformity: NO;
1379165-7
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Board Mounting Option: BOARD LOCK;
1379165-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; EMI Shielded: NO; Mounting Type: BOARD;
1379165-1
TE Connectivity's 1379165-1 is a Combination Line Connector with dimensions of 0.803" x 0.339" x 0.831". Rated at 12V, it uses GLASS FILLED POLYCARBONATE insulator material and has a max operating temperature of 85°C. Ideal for board mounting applications, this connector features a total of 4 contacts and is UL certified.
1379165-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Maximum Operating Temperature (Cel): 85; Terminal Pitch (mm): 2.54;
1379165-5
TE Connectivity's 1379165-5 is a COMBINATION LINE CONNECTOR with dimensions of 0.803" x 0.339" x 0.736". It has a rated voltage of 12V, operating temperature range from -40 to 85°C, and UL flammability rating of 94-HB. Ideal for board mounting applications, this connector features 4 contacts with terminal pitch of 2.54mm and solder termination suitable for mains connector ratings up to 115/230VAC.
1379029-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 1;
1379675-1
TE Connectivity's 1379675-1 is a combination line connector with dimensions of 0.732" x 1.335" x 0.579". It has a rated voltage of 14V and can operate in temperatures ranging from -40°C to 100°C. This connector is commonly used in cable mounting applications and has a total of 12 contacts.
1379114-1
TE Connectivity's 1379114-1 is a Combination Line Connector with dimensions of 1.587" x 0.669" x 0.799". It has an insulation resistance of 50M ohm, rated for 12V, and operates b/w -40 to 85°C. Ideal for board mounting with UL standard compliance, it features a total of 12 contacts arranged in S0P12 configuration.
1379671-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; EMI Shielded: NO; MIL Conformity: NO;
1379325-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 2.717 inch; UL Flammability Code: 94-HB; IEC Conformity: NO;
1379102-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Filter Feature: NO; No. of Ports: 1;
1379114-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; MIL Conformity: NO; DIN Conformance: NO;
1379030-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Terminal Pitch (mm): 2.54; UL Flammability Code: 94-HB;
1379816-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; UL Flammability Code: 94-HB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved