Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1011-249-1205 is a nylon66 COVER ITEM with FEMALE contact gender. It supports wire size up to 0 AWG, operating b/w -55°C to 125°C. Ideal for assembly products requiring high temperature resistance and secure electrical connections.
Median Price
$3.126
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Boersig
1+ parts
$1.499
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$2.230
Mouser Electronics
$3.040
$2.390
$2.140
$2.000
RS Americas
$3.280
$2.530
Element14
$3.358
$3.262
DigiKey
$3.620
$2.742
$2.220
$2.075
Newark
$3.760
$2.760
Conrad
$4.069
$3.639
Farnell
$4.083
$2.553
$1.972
TTI
$2.290
$2.160
TTI Europe
$2.093
$1.642
RS (Exports)
$3.211
Verical
$2.213
$2.052
Chip1Stop
$2.010
$1.650
Nova Conductors
$1.811
Maritex
$2.962
$2.255
Bristol Electronics
NAC Semi
$2.260
$2.090
Vyrian
VNN
Electro Sonic
$2.370
$1.840
$1.750
Rapid Electronics
$1.802
IBS Electronics
$2.454
$1.809
TME
$1.720
LJR Electronics
Q Components
ABC Electronics Ltd.
LIBRA Elektronik GmbH
Goldney Electronics S.L.
Semicontronic
$1.270
$1.238
$1.232
Argo Parts USA
Continental Prestige Electronics
$3.640
$2.100
$1.740
Aztec Data Supply Inc.
$6.200
Perfect Parts
Authorized Procurement Solutions
ErreBi Group
EMSNET (Excess)
Abacus Technologies
Bastille Electronics
Eastek
$400.000
This product is ideal for use in environments with high temperatures, ensuring reliability and durability.
The wide range of operating temperatures allows this product to function effectively in both extreme cold and extreme heat conditions.
The specific assembly item name indicates that this product is designed to be used as a cover, providing protection and safety for other components.
With the ability to accommodate up to 0 AWG wire size, this product is suitable for a wide range of wiring applications.
The female contact gender ensures compatibility with corresponding male connectors, making this product versatile and adaptable for various connections.
Constructed from durable and heat-resistant Nylon66 material, this product offers strength and longevity in its design.
Assembly Products 1011-249-1205 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43030-0009
Molex
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
M39029/76-425
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Gender: MALE; Mounting Style: STRAIGHT; Maximum Wire Size: 0 AWG; Design: SIGNAL;
SSH-003T-P0.2-H
J S T Mfg
The J S T Mfg SSH-003T-P0.2-H is a CRIMP terminal with approvals from CSA and UL, rated for 1A current at 50V AC/DC. It has a contact resistance of 40 mohm, suitable for applications requiring FEMALE contacts in straight mounting style.
SPH-002T-P0.5L
SPH-002T-P0.5L by J S T Mfg is a PAD SERIES CONNECTOR with CRIMP terminals, rated for 3A at 250V AC/DC. It has a contact resistance of 20 mohm and operates b/w -25°C to 85°C. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 28 AWG to 24 AWG.
16-02-0088
CONNECTOR ACCESSORY;
M83513/05-07
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
08-50-0031
Molex 08-50-0031 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contact gender, straight mounting style, and compression contact style. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 120.
46999-0101
The Molex 46999-0101 is a female contact with compression style, made of brass. It is used in the 7880 Series Housing assembly products for wire sizes ranging from 30 AWG to 24 AWG. The contact design is loose, with a finish thickness of 100 and terminal length of 0.186 inch, suitable for straight mounting applications.
BVH-21T-P1.1
BVH-21T-P1.1 by J S T Mfg is a CRIMP terminal CONTACT with 22-18 AWG wire size range, rated for 250V AC/DC. Made of PHOSPHOR BRONZE, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts and 0.067" cable entry.
5913-BK
Anderson Power Products
282466-1
TE Connectivity's 282466-1 plug housing has a finish thickness of 236.22µm, supports crimp terminals for wire gauge sizes ranging from 15 AWG to 13 AWG. With a rated current of 14A and operating temperatures from -40°C to 125°C, it is ideal for discrete wire applications requiring female contacts in straight mounting style.
02-08-1004
Molex 02-08-1004 is a CRIMP CONTACT FEMALE terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
170204-2
TE Connectivity's 170204-2 CONTACT features CRIMP terminal type, rated voltage of 250V, and operating temperature up to 105°C. Ideal for SIGNAL applications with wire gauge ranging from 26 AWG to 20 AWG and a max current rating of 2A.
1375819-1
TE Connectivity's 1375819-1 CONTACT features CRIMP terminal type, rated voltage of 250V, and wire gauge of 22 AWG. Ideal for SIGNAL design applications with a max operating temperature of 105°C and rated current of 4A.
SVH-21T-P1.1
SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.
1SET111001R0000
TE Connectivity's 1SET111001R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports 22 AWG wire gauge, up to 105°C operating temperature. Ideal for DISCRETE WIRE applications, featuring STRAIGHT mounting style.
33011-3002
5-1532137-9
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;
02-06-1101
Molex 02-06-1101 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and 0.062-0.12 inch cable entry with wire sizes ranging from 24 to 18 AWG.
1SNK908310R0000
Abb
CONNECTOR ACCESSORY; Rated Current: 57 A; Insulator Material: POLYAMIDE; Rated AC Voltage: 600 V; Maximum Operating Temperature: 110 Cel; Rated DC Voltage: 600 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1011-229-0205
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel;
1011-344-0205
TE Connectivity 1011-344-0205 is a male plug assembly product with max operating temp of 125°C and min of -55°C. It features plastic material, cap item name, and supports wire size up to 0 AWG. Ideal for applications requiring stud mounting option at 0.200".
1011-026-0205
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
1011-255-0205
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Contact Gender: MALE; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
10114827-001LF
Amphenol Communications Solutions
CONNECTOR ACCESSORY; Contact Style: BELLOWED TYPE; Maximum Cable Entry: .039 inch; Terminal Length: .1 inch; Additional Features: CONTACT FINISH: TIN; Contact Design: STAMPED;
1011-247-1205
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Contact Gender: MALE; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel;
1011-346-0405
CONNECTOR ACCESSORY; DIN Conformity: NO; Contact Gender: MALE; MIL Conformity: NO; Mounting Option-2: STUD; Maximum Operating Temperature: 125 Cel;
1011-245-0805
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
1011-345-0305
TE Connectivity 1011-345-0305 is a male plug assembly product with plastic material. It has a max operating temp of 125°C and min of -55°C. Suitable for applications requiring 0.200 mounting option, it supports wire size up to 0 AWG.
1011-227-0205
CONNECTOR ACCESSORY; Material: NYLON66; Minimum Operating Temperature: -55 Cel; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Maximum Wire Size: 0 AWG;
1011-233-0305
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0;
1011-235-0405
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;
1011-347-0605
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0;
1011-231-0305
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
1011-263-0405
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Contact Gender: MALE;
1011-256-0205
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
1011-257-0205
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
1011-348-0805
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel;
1011-268-0605
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO; Contact Gender: MALE; IEC Conformity: NO; Maximum Wire Size: 0 AWG;
1011-344-0205-MS
CONNECTOR ACCESSORY; MIL Conformity: NO; Usage: PLUG; IEC Conformity: NO; Material: PLASTIC; Contact Gender: MALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved