Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;
Median Price
$1.920
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Boersig
1+ parts
$0.809
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$1.970
Mouser Electronics
$2.180
$1.770
$1.430
$1.320
Newark
$2.470
$1.810
$1.500
$1.360
Element14
$2.522
$1.622
$1.600
DigiKey
$2.610
$1.881
$1.599
$1.499
Farnell
$3.074
$2.153
$1.738
TTI
$1.280
TTI Europe
$1.101
$1.024
Master Electronics
$1.220
$1.180
$1.150
Verical
$1.531
$1.442
Chip1Stop
$1.870
$1.620
TME
$2.010
$1.630
$1.340
Electro Sonic
$2.430
$1.980
$1.530
IBS Electronics
$0.926
$1.501
NAC Semi
$1.200
$1.110
Vyrian
LJR Electronics
EMSNET
Q Components
Nova Conductors
VNN
Cyclops Electronics Ltd
Extreme Components
Semicontronic
$0.690
$0.673
$0.669
Continental Prestige Electronics
$2.420
$1.550
Aztec Data Supply Inc.
$7.309
Perfect Parts
EMSNET (Excess)
Argo Parts USA
Abacus Technologies
Bastille Electronics
Resion (Excess)
Assembly Products 1011-235-0405 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Contact Gender:
Maximum Operating Temperature:
Minimum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Central Semiconductor
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1731110082
Molex
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
M23053/5-103-9
Sumitomo Electric Industries
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
880811-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
DF22A-1416SCFA
Hirose Electric
CONNECTOR ACCESSORY;
1053001100
1053002100
5040520098
Molex 5040520098 CONTACT features CRIMP terminal type for 28-24 AWG wires. Rated for 150V AC/DC, 3A current, it's ideal for POWER AND SIGNAL applications with FEMALE contact gender and 0.071-0.043 inch cable entry.
DTP04-4P-P059
TE Connectivity's DTP04-4P-P059 is a male power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for assembly products requiring high voltage and current capabilities in various applications.
2200156
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
66506-3
TE Connectivity 66506-3 is a male signal contact with crimp terminal type. It has a wire gauge of 20 AWG, rated for 2A current, and made of brass material. Ideal for use in AMPLIMITE HDP-20 and CPC connectors with operating temperatures ranging from -55 to 105 °C.
AT06-4S-CAP
Amphenol
M23053/5-106-9
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
963225-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
61030012010010
Harting Electronics & Kg
Assembly Items;
2-2154857-1
TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.
12124075
Aptiv
Aptiv's 12124075 CONTACT features FEMALE gender, CRIMP terminal type, and 0.079-0.094 inch cable entry. Ideal for STRAIGHT mounting in Assembly Products, with COMPRESSION contact style and 0.224" terminal length.
1060-16-0644
TE Connectivity 1060-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 16 AWG and rated current of 13A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55 to 150°C.
249-117
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;
L17D204182TX
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-FEMALE SCREWLOCK; Additional Features: ROHS COMPLIANT; DIN Conformity: NO;
Insultab
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1011-229-0205
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel;
1011-344-0205
TE Connectivity 1011-344-0205 is a male plug assembly product with max operating temp of 125°C and min of -55°C. It features plastic material, cap item name, and supports wire size up to 0 AWG. Ideal for applications requiring stud mounting option at 0.200".
1011-026-0205
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
1011-255-0205
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Contact Gender: MALE; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
10114827-001LF
Amphenol Communications Solutions
CONNECTOR ACCESSORY; Contact Style: BELLOWED TYPE; Maximum Cable Entry: .039 inch; Terminal Length: .1 inch; Additional Features: CONTACT FINISH: TIN; Contact Design: STAMPED;
1011-247-1205
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Contact Gender: MALE; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel;
1011-346-0405
CONNECTOR ACCESSORY; DIN Conformity: NO; Contact Gender: MALE; MIL Conformity: NO; Mounting Option-2: STUD; Maximum Operating Temperature: 125 Cel;
1011-245-0805
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
1011-345-0305
TE Connectivity 1011-345-0305 is a male plug assembly product with plastic material. It has a max operating temp of 125°C and min of -55°C. Suitable for applications requiring 0.200 mounting option, it supports wire size up to 0 AWG.
1011-227-0205
CONNECTOR ACCESSORY; Material: NYLON66; Minimum Operating Temperature: -55 Cel; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Maximum Wire Size: 0 AWG;
1011-233-0305
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0;
1011-249-1205
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Assembly Item Name: COVER ITEM; Material: NYLON66; MIL Conformity: NO; Contact Gender: FEMALE;
1011-347-0605
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0;
1011-231-0305
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
1011-263-0405
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Contact Gender: MALE;
1011-256-0205
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
1011-257-0205
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
1011-348-0805
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel;
1011-268-0605
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO; Contact Gender: MALE; IEC Conformity: NO; Maximum Wire Size: 0 AWG;
1011-239-0605
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved