Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1-1571983-5 is a DIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. Featuring SPST function, GOLD OVER NICKEL plating, and 1000 cycle electrical life, it is ideal for applications requiring a reliable slide DIP switch with 2 positions.
Median Price
$3.490
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.420
1k+ parts
$2.330
10k+ parts
$1.840
DigiKey
$2.412
$2.032
$1.845
Nova Conductors
$2.298
-
Vyrian
VNN
Contempo Components LLC
Argo Parts USA
$2.154
Continental Prestige Electronics
$2.111
Aranea Global
$2.252
$2.162
Semicontronic
$2.460
$2.398
$2.386
Component Stockers USA
$3.140
$2.370
$1.740
Aztec Data Supply Inc.
$3.322
Perfect Parts
High temperature and chemical resistance make the switch durable and reliable for various applications.
Copper alloy terminals ensure good conductivity and long-term reliability.
With a high electrical life rating, the switch can withstand frequent switching without deteriorating.
The high insulation resistance ensures minimal leakage current and prevents short circuits.
The compact size of the switch makes it suitable for applications with space constraints.
Sealed with tape for protection against dust and moisture, enhancing the switch's reliability in various environments.
Single Pole, Single Throw function provides a simple on/off operation for the switch.
Gold over nickel plating ensures good contact reliability and corrosion resistance.
The insulator material offers good electrical insulation properties, enhancing the switch's safety and reliability.
Can operate at high temperatures without performance degradation, suitable for various industrial applications.
Can operate in cold environments without issues, increasing the switch's versatility.
Copper alloy end contacts ensure reliability and longevity in electrical connections.
Two switch positions provide flexibility in switching options.
The slide design of the DIP switch allows for easy manual operation and quick switching between positions.
Withstands high voltage without breakdown, ensuring safety and reliability in electrical circuits.
Black color gives the switch a sleek and professional appearance.
Can handle a maximum current of 0.025A, suitable for low-power applications.
Latched switch action ensures that once set, the position remains stable until manually changed.
Solder termination provides a secure and durable electrical connection.
Straight surface mount design simplifies installation and allows for easy integration into electronic circuits.
Liquid crystal polymer actuator material offers durability and smooth operation for the switch.
DIP & SIP Switches 1-1571983-5 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
Manufacturer Series:
Additional Features:
1-1571983-5 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Bytesonic Electronics
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Taiwan Semiconductor
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Comchip Technology
Pulse Electronics
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
A6TN-8101
Omron
Omron A6TN-8101 is a Slide DIP Switch with 8 sections, SPST function, and 1000 cycles electrical life. It operates b/w -30°C to 85°C with a max contact rating of 0.025A at 24VDC. Ideal for through-hole mounting applications requiring latched switch action in electronics.
76SD01T
Grayhill
Grayhill's 76SD01T is a DPDT slide DIP switch with 2000 cycles electrical life. With a body width of 9.65in and height of 6.78mm, it operates b/w -40 to 85°C. Featuring matte tin terminal finish, it has a max DC contact voltage of 30V and current rating of 0.15A@30VDC, making it ideal for through-hole-straight mounting applications.
5435802-9
TE Connectivity
TE Connectivity's 5435802-9 is a Piano DIP Switch with 8 sections, SPST function, and 7000 cycles electrical life. Made of glass-filled polyester housing material, it has copper alloy terminals for high insulation resistance. Ideal for applications requiring momentary switch action in temperatures ranging from -55 to 105°C.
218-2LPSTRF
Cts
Cts 218-2LPSTRF is a SPST slide DIP switch with 1000 cycles electrical life. It has gold flash terminal finish, operates b/w -55 to 85 °C, and supports 0.025A@24VDC load. Ideal for surface mount applications requiring latched switch action in tape and reel packaging.
CHS-02TA
Nidec Copal Electronics
The Nidec Copal Electronics CHS-02TA is a waterproof slide DIP switch with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max DC contact current of 0.1A and is commonly used in applications requiring surface mount straight mounting, such as electronic devices and industrial equipment.
A6S-3101-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -20 Cel; Packing Method: TR, EMBOSSED; null: FLAT TYPE; Maximum DC Contact Current: .025 A;
A6S-4104-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .025 A; Insulation Resistance: 100000000 ohm; Terminal Finish: GOLD; Maximum DC Contact Voltage: 24 V;
219-2LPSTRF
219-2LPSTRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER end contacts. It has 2 switch sections, SPST function, and operates b/w -55°C to 85°C. Ideal for OFF-ON applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
A6FR-6101
DIP Switches; null: PIANO DIP SWITCH;
1571983-9
TE Connectivity's 1571983-9 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST switch function and ROCKER actuator type, it is ideal for applications requiring ON-OFF contact function in various electronic devices.
A6T-5101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Terminal Finish: Gold (Au); Electrical Life: 1000 Cycle(s); null: SLIDE DIP SWITCH; Body Length/Diameter: 13.64 mm;
76SB03ST
The Grayhill 76SB03ST is a slide DIP switch with SPST function and 3 switch sections. It has an electrical life of 2000 cycles, max DC contact voltage of 30V, and operates b/w -40 to 85°C. Ideal for applications requiring latched switch action, it features solder termination and through-hole mounting.
A6SN-7101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: IP40; WATER PROOF; Termination Type: SOLDER; Insulation Resistance: 100000000 ohm; null: LATCHED;
A6TN-6104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Operating Temperature: 85 Cel; Body Height: 4.25 mm; Body Length/Diameter: 17.2 mm; Minimum Operating Temperature: -30 Cel;
DMR-04-T-V
Diptronics Manufacturing
DMR-04-T-V by Diptronics is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for ON-OFF functions. It features a polyethylene/polyphenylene sulfide body, brass terminals, and operates b/w -20 to 85°C. Ideal for applications requiring a latched switch action in electronic devices.
1571983-5
TE Connectivity's 1571983-5 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and ROCKER actuator type, it is ideal for applications requiring a latched switch action. Operating b/w -30 to 85 °C, this slide DIP switch offers reliable performance in various electronic systems.
A6S-6102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLAT TYPE; Contact Resistance: 200 mohm; null: YELLOW; Terminal Finish: Gold (Au);
A6S-2101-H
Omron A6S-2101-H is a DIP switch with 1000 cycles electrical life, 100M ohm insulation resistance, and SPST switch function. It is ideal for applications requiring a slide dip switch with latched action, featuring gold terminal finish and 24VDC max contact rating of 0.025A.
A6S-8101-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Electrical Life: 1000 Cycle(s); null: 8; Terminal Finish: Gold (Au); Insulation Resistance: 100000000 ohm;
A6E-5104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Insulation Resistance: 100000000 ohm; Minimum Operating Temperature: -20 Cel; Terminal Finish: Gold (Au); null: 2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1571983-4
TE Connectivity 1-1571983-4 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and 10 switch sections, it's ideal for applications requiring ON-OFF control in electronic devices. Operating b/w -30 to 85°C, this slide dip switch offers reliable performance with a 1000-cycle electrical life.
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Width: 6.2 inch; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -30 Cel; null: SPST;
1-1571983-1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.31 mm; Electrical Life: 1000 Cycle(s); Body Length/Diameter: 11.29 mm; null: 8;
TE Connectivity's 1-1571983-1 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and 8 switch sections, it is ideal for panel mounting applications requiring a max DC contact current of 0.1A at 50VDC.
1-1571983-0
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; JESD-609 Code: e4; Body Width: 6.2 inch; Manufacturer Series: 1571983;
TE Connectivity 1-1571983-0 is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. Featuring SPST function, it has 8 sections, GOLD OVER NICKEL plating, and operates b/w -30 to 85 °C. Ideal for applications requiring a reliable slide dip switch with latched action and solder termination.
1-1571983-3
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; null: LATCHED; Maximum DC Contact Current: .025 A; Electrical Life: 1000 Cycle(s);
TE Connectivity 1-1571983-3 is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. It offers SPST function, 10 switch sections, and gold over nickel plating. Ideal for applications requiring ON-OFF contact function in electronic devices.
1-1571999-1
TE Connectivity's 1-1571999-1 is a DIP & SIP switch with a white actuator and polyphenylene sulphide housing. It has an electrical life of 1000 cycles, insulation resistance of 100MΩ, and can handle a max AC contact current of 1A. This switch is commonly used in applications requiring SPST functionality and operates within a temperature range of -30°C to 85°C.
1-1571983-5
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Voltage: 24 V; null: 2; Electrical Life: 1000 Cycle(s); null: LATCHED;
1-1571999-6
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Maximum AC Contact Current: 1 A; null: NYLON; null: GOLD OVER NICKEL; Packing Method: BOX; TUBE;
1-1571999-4
TE Connectivity's 1-1571999-4 is a white DIP & SIP switch with a polyphenylene sulphide housing material. It has a max operating temperature of 85°C and can handle a max AC contact current of 1A. This piano dip switch is suitable for panel mounting and has a latched switch action.
1-1571983-6
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Manufacturer Series: 1571983; null: LIQUID CRYSTAL POLYMER; null: LATCHED; Maximum Operating Temperature: 85 Cel;
1-1571998-6
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Plating: GOLD OVER NICKEL; Minimum Operating Temperature: -30 Cel; null: POLYPHENYLENE SULPHIDE; Maximum Contact DC Rating (R Load): .025A@24VDC;
1-1571998-1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 16.21 mm; null: POLYPHENYLENE SULPHIDE; Electrical Life: 1000 Cycle(s); null: 0 deg;
1-1571998-2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 0 deg; null: COPPER ALLOY; Electrical Life: 1000 Cycle(s); End Contact Material: COPPER ALLOY;
1-1571998-5
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Plating: GOLD OVER NICKEL; null: 300VAC; null: WAVE; End Contact Material: COPPER ALLOY;
1-1571998-9
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: GOLD OVER NICKEL; Electrical Life: 1000 Cycle(s); null: POLYPHENYLENE SULPHIDE; Maximum Contact DC Rating (R Load): .025A@24VDC;
1-1571983-2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): .025A@24VDC; null: SLIDE; null: POLYPHENYLENE SULPHIDE; Maximum DC Contact Voltage: 24 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved