Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1571983-3 is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. It offers SPST function, 10 switch sections, and gold over nickel plating. Ideal for applications requiring ON-OFF contact function in electronic devices.
Median Price
$3.710
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Avnet
1+ parts
$2.307
100+ parts
$2.189
1k+ parts
-
10k+ parts
Farnell
$3.320
Adafruit Industries
$4.423
$4.202
Element14
$4.590
$4.320
$4.070
Newark
$4.970
$4.260
$3.500
TE Connectivity
$5.140
$4.770
$4.480
$4.200
Mouser Electronics
$5.520
$3.760
$3.220
$3.110
DigiKey
$3.357
$3.020
Master Electronics
$8.060
$7.980
$2.840
Verical
$3.340
$3.170
$2.310
Powell Electronics
$2.950
$2.680
Arrow
$2.267
TTI
$1.710
$1.670
TTI Europe
$2.211
Chip1Stop
$3.180
Nova Conductors
$2.110
TME
$4.220
$3.420
$3.090
Rapid Electronics
$2.693
IBS Electronics
$3.038
$2.875
$2.087
Vyrian
VNN
ComSIT Distribution GmbH
North Shore Components
Bas Electronics GmbH & Co. KG
First Choice Components Inc.
Semicontronic
$1.450
$1.414
$1.406
Argo Parts USA
Aztec Data Supply Inc.
$3.410
Advanced Electronics
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Glotronic Ltd.
Metaverse IC Inc.
Kepictronics
Futuretech Components
GreenTree Electronics
Continental Prestige Electronics
This durable material ensures longevity and stability in various environments, making it a reliable choice.
Copper alloy terminals offer excellent conductivity and resistance to corrosion, enhancing the overall performance of the switch.
With a high electrical life cycle, this switch is designed to provide long-lasting functionality and reliability.
High insulation resistance ensures minimal leakage current and prevents electrical malfunctions, making it a safe option for use.
The compact body width allows for easy installation and integration into various electronic devices and systems.
The tape-sealed design provides protection against dust, dirt, and moisture, ensuring the switch's durability in harsh conditions.
With multiple switch sections, this product offers versatility and customization options for different settings and configurations.
The Single Pole Single Throw function simplifies the operation and control of the switch, making it user-friendly and efficient.
Gold plating over nickel ensures excellent conductivity and corrosion resistance, maintaining consistent performance over time.
The insulator material provides excellent electrical insulation properties, reducing the risk of short circuits and electrical failures.
DIP & SIP Switches 1-1571983-3 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum AC Current:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
JESD-609 Code:
Additional Features:
1-1571983-3 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Taitron Components
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Db Lectro
STMicroelectronics
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
219-2LPSTF
Cts
The Cts 219-2LPSTF is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 0.1A@20VDC rating in TUBE packaging.
435640-2
Tyco Electronics Amp
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Body Width: 9.65 inch; Manufacturer Series: 435640; Terminal Finish: Tin/Lead (Sn/Pb); Termination Type: SOLDER;
1571983-1
TE Connectivity's 1571983-1 is a Slide DIP Switch with SPST function. It features Polyphenylene Sulphide housing, Copper Alloy terminals, and Gold over Nickel plating. With a sealing tape, it has an electrical life of 1000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring ON-OFF contact functions in electronic devices.
219-6MSTR
219-6MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 6 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a reliable slide dip switch with 2000 cycles lifespan.
4-1825059-0
TE Connectivity 4-1825059-0 is a SPST slide DIP switch with 8 sections, 1000 cycles electrical life, and polyphenylene sulphide housing. It has copper alloy terminals, nickel plating, and gold center contacts. Ideal for panel mounting applications requiring a latched OFF-ON contact function at temperatures ranging from -30 to 85°C.
218-4LPSTRF
Cts 218-4LPSTRF is a DIP switch with 4 sections, SPST function, and gold terminal finish. It has a body width of 5.8in and height of 2.65mm, suitable for surface mount applications. With an electrical life of 1000 cycles and operating temperature range from -55 to 85°C, it offers reliable performance in various electronic devices.
DS04-254-1-01BK-SMT
Cui
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 3.54 mm; Insulation Resistance: 100000000 ohm;
218-2LPSTJRF
Cts 218-2LPSTJRF is a slide DIP switch with SPST function, gold flash terminal finish, and latched switch action. It has 1000 cycles electrical life, operates b/w -55 to 85°C, and supports 0.025A@24VDC current rating. Ideal for surface mount applications requiring reliable switching in compact spaces.
1825058-1
TE Connectivity 1825058-1 is a slide DIP switch with SPST function. It has gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing. With 1000 cycles electrical life, it's ideal for applications requiring off-on contact functions in electronic devices.
SDA04H0SBR
Itt Cannon
SDA04H0SBR by ITT Cannon is a 4-section SPST slide DIP switch with gold-plated contacts, rated for 1000 cycles. Made of polyphenylene sulfide, it has a body width of 7.49in and operates b/w -40 to 85°C. Ideal for ON-OFF applications in electronics requiring a compact, surface-mountable switch solution.
78B02T
Grayhill
Grayhill's 78B02T is a DIP switch with 2 sections, SPST function, and gold over nickel plating. With electrical life of 2000 cycles and insulation resistance of 5G ohm, it operates b/w -40 to 85°C. Ideal for applications requiring latched switch action and solder termination in through-hole mounting.
A6E-7101
Omron
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: MAKE-BEFORE-BREAK; null: LATCHED; Sealing: BOTTOM SEALED; null: 1;
A6ER-7104
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Insulation Resistance: 100000000 ohm; Contact Resistance: 200 mohm; null: 7PST; null: PIANO DIP SWITCH;
219-4ES
219-4ES by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications requiring a max of 0.1A@20VDC current rating in a compact design suitable for surface mount-straight mounting.
1571999-7
TE Connectivity's 1571999-7 is a SPST Piano DIP Switch with 4 positions, gold over nickel plating, and polyphenylene sulfide housing. It has an electrical life of 1000 cycles and is ideal for panel mounting applications in electronics requiring reliable switching at temperatures ranging from -30 to 85°C.
MCDHN-08F-T-V
Multicomp Pro
The Multicomp Pro MCDHN-08F-T-V is a SPST slide DIP switch with 8 sections, gold-plated contacts, and brass terminals. It has an electrical life of 1000 cycles and operates b/w -40°C to 85°C. Ideal for applications requiring reliable switching in electronic circuits with a need for up to 24VDC at 0.025A current rating.
DS04-254-2-02BK-SMT-TR
DS04-254-2-02BK-SMT-TR by Cui is a slide DIP switch with SPST function, 2000 cycle electrical life, and 100M ohm insulation resistance. Ideal for applications requiring a latched switch action, surface mount-straight mounting feature, and solder termination.
97C04SRT
97C04SRT by Grayhill is a slide DIP switch with 4 sections, SPST function, and gold over nickel plating. It has a max DC contact voltage of 24V and an electrical life of 1000 cycles. Ideal for applications requiring reliable switching in electronic devices with temperature range from -40 to 85°C.
76SB12ST
The Grayhill 76SB12ST is a slide DIP switch with 12 sections, SPST function, and latched switch action. It has an electrical life of 2000 cycles and operates b/w -40 to 85°C. Ideal for applications requiring through-hole mounting such as industrial control systems.
KAT1108E
E-switch
DIP Switches; null: SLIDE DIP SWITCH;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1571983-4
TE Connectivity 1-1571983-4 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and 10 switch sections, it's ideal for applications requiring ON-OFF control in electronic devices. Operating b/w -30 to 85°C, this slide dip switch offers reliable performance with a 1000-cycle electrical life.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Width: 6.2 inch; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -30 Cel; null: SPST;
1-1571983-1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.31 mm; Electrical Life: 1000 Cycle(s); Body Length/Diameter: 11.29 mm; null: 8;
TE Connectivity's 1-1571983-1 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and 8 switch sections, it is ideal for panel mounting applications requiring a max DC contact current of 0.1A at 50VDC.
1-1571983-0
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; JESD-609 Code: e4; Body Width: 6.2 inch; Manufacturer Series: 1571983;
TE Connectivity 1-1571983-0 is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. Featuring SPST function, it has 8 sections, GOLD OVER NICKEL plating, and operates b/w -30 to 85 °C. Ideal for applications requiring a reliable slide dip switch with latched action and solder termination.
1-1571983-3
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; null: LATCHED; Maximum DC Contact Current: .025 A; Electrical Life: 1000 Cycle(s);
1-1571999-1
TE Connectivity's 1-1571999-1 is a DIP & SIP switch with a white actuator and polyphenylene sulphide housing. It has an electrical life of 1000 cycles, insulation resistance of 100MΩ, and can handle a max AC contact current of 1A. This switch is commonly used in applications requiring SPST functionality and operates within a temperature range of -30°C to 85°C.
1-1571983-5
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Voltage: 24 V; null: 2; Electrical Life: 1000 Cycle(s); null: LATCHED;
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TAPE SEALED; Manufacturer Series: 1571983; null: POLYPHENYLENE SULPHIDE; null: SLIDE;
1-1571999-6
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Maximum AC Contact Current: 1 A; null: NYLON; null: GOLD OVER NICKEL; Packing Method: BOX; TUBE;
1-1571999-4
TE Connectivity's 1-1571999-4 is a white DIP & SIP switch with a polyphenylene sulphide housing material. It has a max operating temperature of 85°C and can handle a max AC contact current of 1A. This piano dip switch is suitable for panel mounting and has a latched switch action.
1-1571983-6
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Manufacturer Series: 1571983; null: LIQUID CRYSTAL POLYMER; null: LATCHED; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved