Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-104505-0, a male signal contact with crimp terminal type, has a rated voltage of 300V and rated current of 3A. With finish thickness of 15 and operating temperature range from -65 to 105°C, it is ideal for applications requiring precise signal transmission in limited space.
Median Price
$0.244
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$0.210
100+ parts
$0.153
1k+ parts
$0.129
10k+ parts
$0.121
Newark
$0.278
$0.204
$0.173
$0.162
TE Connectivity
$0.290
$0.270
$0.250
$0.240
Element14
$0.366
$0.266
$0.226
-
Master Electronics
$0.122
PEI Genesis
Verical
TTI
Mouser Electronics
Chip1Stop
$0.146
$0.111
$0.106
DigiKey
Arrow
Powell Electronics
NEP Electronics
IBS Electronics
$0.171
Electro Sonic
$0.430
$0.411
Rapid Electronics
TME
EMSNET
Q Components
Nova Conductors
VNN
Continental Prestige Electronics
$0.296
$0.194
$0.138
Kepictronics
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
EMSNET (Excess)
Netroflash
A thick finish provides durability and longevity to the product, ensuring it can withstand wear and tear over time.
Crimp terminals make installation quick and easy, allowing users to securely connect wires without the need for soldering.
With a high rated voltage, this product is suitable for a wide range of applications and ensures safe and reliable electrical connections.
The minimum cable entry size allows for compatibility with a variety of cable sizes, giving users flexibility in their wiring setup.
The high maximum operating temperature ensures the product can be used in various environments without risking overheating or damage.
The low minimum operating temperature makes this product suitable for use in extreme cold conditions, ensuring reliable performance in harsh climates.
With a wire gauge of 22, this product is compatible with a standard size wire, making it versatile for a range of electrical applications.
The cross-sectional area indicates the conductivity of the product, ensuring efficient power transmission and minimal loss.
The ability to accommodate small wire sizes like 26 AWG allows for precise and delicate electrical connections, ideal for sensitive equipment.
Support for larger wire sizes like 22 AWG offers versatility in connecting different types of wires, making this product suitable for various applications.
The high rated current capacity allows for safe and reliable power transmission, making this product ideal for applications requiring moderate current flow.
The maximum cable entry size accommodates larger cables, ensuring compatibility with a wide range of wire sizes for versatile use.
The male contact gender is commonly used for creating secure and stable connections, making this product reliable for various electrical connections.
The signal design indicates that this product is specifically intended for transmitting signals, ensuring clear and accurate communication in signal transmission applications.
Constructed from phosphor bronze, this product offers excellent conductivity, corrosion resistance, and durability, making it a reliable choice for long-term use.
Assembly Products 1-104505-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
Design:
Finish Thickness:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
4554
Jw Miller Magnetics
Other Semiconductors;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Microchip Technology
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1554216002
Molex
WIRE AND CABLE;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DF3-2428SCC
Hirose Electric
DF3-2428SCC by Hirose Electric is a CRIMP FEMALE CONTACT with BELLOWED design made of PHOSPHOR BRONZE. It has a 0.108" terminal length and STRAIGHT mounting style. Ideal for applications requiring reliable electrical connections in assembly products.
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
M80-0110005
Harwin Plc
The Harwin PLC M80-0110005 is a CRIMP terminal with max temp of 125°C and min temp of -55°C. It has a rated current of 3A, suitable for 22 AWG wire size. This FEMALE contact with ROUND PIN-SOCKET design is ideal for SIGNAL applications with 0.043" cable entry.
C88E000209
Northern Technologies
CONNECTOR ACCESSORY; Usage: CM CONNECTOR; Mounting Option-2: SCREW; Assembly Item Name: COVER ITEM; Material: ZINC ALLOY; Mounting Option-1: 4-40;
10141272-313ALF
AMPHENOL ICC
The Amphenol Icc 10141272-313ALF contact assembly product features a crimp terminal type, rated for 4A current at 48V DC/AC. With a contact resistance of 30 mΩ, it is suitable for applications requiring a max wire size of 24 AWG and operating temperatures ranging from -40°C to 130°C.
2002-404
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
W3S
W3S by TE Connectivity is an Assembly Product designed for DT SERIES applications. With a temperature range of -55 to 125°C, it supports up to 0 AWG wire size. Made of PBT material, it is ideal for power and signal assemblies requiring high durability.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
13663715
Aptiv
CONNECTOR ACCESSORY;
3341-1S
3m Electronic Products Division
The 3m Electronic Products Division's 3341-1S JACK SCREW is made of steel, with a straight mounting style and #4-40 screw option. It has a terminal length of 7.9 inches, ideal for assembly applications requiring secure fastening in electronic devices.
204370-2
TE Connectivity's 204370-2 is a CRIMP terminal CONTACT for 2221860 SERIES CONNECTOR with finish thickness of 50, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a rated current of 5 A and operates b/w -55 °C to 125 °C, making it ideal for SIGNAL applications requiring male contact gender.
3025163
Phoenix Contact
The Phoenix Contact 3025163 is a steel CLAMPING ITEM with EN and IEC approvals. It has a min cable entry of 0.118" and max cable entry of 0.315". Ideal for securing cables in industrial applications using M4 mounting option.
RC16M23K
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 15.75; IEC Conformity: NO; Design: SIGNAL; Additional Features: UNDER PLATING: NICKEL;
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
09330006115
Harting Electronics & Kg
Harting Electronics & Kg's 09330006115 CONTACT features CRIMP terminal type, MALE contact gender, and COPPER ALLOY material. Ideal for applications requiring 18 AWG wire size, with 1 mohm contact resistance. Mounting style is STRAIGHT for use in various assembly products.
249-120
TERMINAL BLOCK ACCESSORY;
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
2858496
1-794610-1
TE Connectivity 1-794610-1 CONTACT is a FEMALE solder terminal with 5A rated current and 250V DC voltage. Designed for POWER applications, it has a stranded construction, 0.52mm2 cross section area, and can accommodate wire sizes from 24 to 20 AWG.
1924463-3
TE Connectivity's 1924463-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 18 AWG, rated for 13A current. Ideal for power applications with operating temperatures ranging from -40 to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-104480-7
TE Connectivity 1-104480-7 is a crimp terminal with 300V AC/DC rating, suitable for discrete wire applications. Featuring copper alloy construction, it has a contact resistance of 12 mΩ and can accommodate wire sizes from 26 to 22 AWG. With approvals from CSA and UL, this CONTACT is designed for power and signal connections in various assemblies.
1-104480-6
TE Connectivity 1-104480-6 is a CRIMP terminal with 300V rated voltage, suitable for DISCRETE WIRE cables. Featuring a contact resistance of 12 mohm, it has a max operating temperature of 105°C and is approved by CSA and UL for various applications in POWER AND SIGNAL designs.
1-104480-3
TE Connectivity 1-104480-3 is a crimp terminal with a rated voltage of 300V and a max operating temperature of 105°C. It is commonly used in power and signal applications, with approvals from CSA and UL.
1-104480-2
TE Connectivity 1-104480-2 is a crimp terminal with 300V AC/DC rating, suitable for power and signal applications. It features a contact resistance of 12 mΩ, wire gauge range from 26 to 22 AWG, and operating temperatures from -65°C to 105°C. Ideal for discrete wire assemblies requiring female contacts.
1-104481-0
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Maximum Wire Size: 28 AWG; Maximum Operating Temperature: 105 Cel; Cable Types: DISCRETE WIRE;
1-104479-0
TE Connectivity 1-104479-0, a crimp terminal with 300V AC/DC voltage rating and 3A current, is ideal for discrete wire applications. Featuring copper alloy construction, it has a contact resistance of 12 mΩ and operates in temperatures ranging from -65°C to 105°C. Suitable for wire sizes b/w 24-20 AWG, this female contact is CSA/UL approved for power and signal assemblies.
110440002
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: 1104;
1-104480-5
TE Connectivity 1-104480-5 is a crimp terminal with approvals from CSA and UL, rated for 300V AC/DC. It has a contact resistance of 12 mohm, suitable for power and signal applications in cables ranging from 26 to 22 AWG. The terminal's copper alloy construction ensures reliable performance in temperatures from -65 to 105°C.
1-104480-4
TE Connectivity 1-104480-4 is a crimp terminal with a rated voltage of 300V and a max operating temperature of 105°C. It is used for power and signal applications, with approvals from CSA and UL.
1-104479-3
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Finish Thickness: 30; Wire Gauge (AWG): 20; Rated AC Voltage: 300 V;
1-104505-2
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Finish Thickness: 30; Minimum Cable Entry: .035 inch; Maximum Operating Temperature: 105 Cel;
1-104479-2
TE Connectivity 1-104479-2 is a CRIMP CONTACT with 300V AC/DC rated voltage, suitable for DISCRETE WIRE applications. Featuring a contact resistance of 12 mohm, it has a wire gauge range from 24 to 20 AWG and can handle up to 3A current. Ideal for POWER AND SIGNAL designs, it operates b/w -65°C to 105°C temperature range.
1-104479-1
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Design: POWER AND SIGNAL; Minimum Wire Size: 24 AWG; Rated AC Voltage: 300 V;
1-104506-0
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Assembly Item Name: CONTACT; Approvals (V): CSA; UL; Maximum Cable Entry: .054 inch;
1-104505-1
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Terminal Type: CRIMP; Finish Thickness: 15; Cross Section Area: .4 mm2;
1-104505-3
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3 A; Minimum Cable Entry: .035 inch; Finish Thickness: 30; Minimum Operating Temperature: -65 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved