Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMK107BJ106MALTD by Taiyo Yuden is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact rectangular package style with wraparound terminals.
Median Price
$0.117
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.440
100+ parts
$0.176
1k+ parts
$0.130
10k+ parts
-
Mouser Electronics
$0.450
$0.180
$0.134
$0.102
Master Electronics
$0.088
Verical
$0.108
TTI
$0.089
Future Electronics
$0.260
Newark
$0.126
Avnet
$0.083
TME
$0.100
$0.022
$0.013
$0.011
Nova Conductors
$0.163
Bristol Electronics
$0.263
$0.131
$0.052
Component Electronics Inc.
$0.380
$0.290
$0.250
Freelance Electronics
$0.525
$0.552
$0.520
IBS Electronics
$0.128
Vyrian
Chip Stock
Cyclops Electronics Ltd
Electro Sonic
$0.104
NAC Semi
Prism Electronics
J & M Industries LLC
Atlantic Semiconductor
PC Components Company LLC
Martec Srl
North Shore Components
SPM Sales
Sensible Micro Corp
Inventory MP
Elcom Components
M&R Communications
Speed Components Ltd
South Electronics
Resion
A2Z Electronics, Inc.
EPE Components Inc.
Ampacity Inc.
$0.081
Semicontronic
Continental Prestige Electronics
$0.162
$0.159
Argo Parts USA
$0.157
Netroflash
$0.155
$0.152
Corohmni
$0.164
Modulus Dynamics
$0.181
$0.179
$0.174
Aztec Data Supply Inc.
$0.480
Advanced Electronics
$0.583
$0.554
Abacus Technologies
RC Electronics
Infinite Electronics LLP (Excess)
Ceramic dielectric material is known for its stability and reliability, making this capacitor suitable for various applications.
Rectangular package shape allows for efficient placement on circuit boards, saving space and providing a neat arrangement.
Multi-layer construction enhances capacitance density and allows for higher capacitance values in a compact size.
Secure packing method ensures safe transportation and handling of the capacitors, preventing damage during shipping.
Two terminals provide simple connectivity and ease of integration into electronic circuits.
Wraparound terminal shape allows for easy soldering and strong mechanical connection, improving reliability.
Negative tolerance ensures that the actual capacitance value will not fall below 80% of the rated value, providing reliability in performance.
X5R temperature characteristics indicate stable capacitance over a wide temperature range, making it suitable for various operating conditions.
The high maximum operating temperature allows for reliable performance in demanding environments without degradation.
Ceramic capacitors are known for their low cost, high reliability, and stability, making them a popular choice in electronics.
The low minimum operating temperature ensures the capacitor can function in a wide range of temperature conditions.
The low temperature coefficient indicates minimal variation in capacitance with temperature changes, ensuring stable performance.
Matte tin over nickel terminal finish provides good solderability and corrosion resistance, enhancing the durability of the capacitor.
Low profile height allows for compact design and easy integration into electronic devices with space constraints.
Small width contributes to the overall compact size of the capacitor, suitable for densely populated circuit boards.
Surface mounting feature enables easy and secure installation on PCBs, saving assembly time and allowing for automation.
The moderate length provides stability and allows for easy placement on the PCB during assembly.
Positive tolerance ensures that the actual capacitance value will not exceed 120% of the rated value, providing consistency in performance.
This capacitor has a capacitance of 10 microfarads, suitable for filtering, decoupling, and timing applications in various electronic circuits.
The capacitor is rated for a DC voltage of 10 volts, making it suitable for low voltage applications in electronics.
Fixed Capacitors LMK107BJ106MALTD attributes and parameters. Explore more Fixed Capacitors devices from Taiyo Yuden
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
LMK107BJ106MALTD Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Weitronic Enterprise
Toshiba
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
04025C102KAT2A
KYOCERA AVX
04025C102KAT2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.56mm and wraparound terminals.
M39006/25-0072
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1608X7R1H103K080AA
TDK
The TDK C1608X7R1H103K080AA is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55°C to 125°C, making it suitable for various electronic applications requiring stable performance in a compact size.
C2220C106K5RACTU
KEMET Corporation
KEMET C2220C106K5RACTU is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. It is a surface mount component suitable for applications requiring stable performance in temperatures ranging from -55 to 125°C. Ideal for compact electronic devices due to its small size and multi-layer design.
M39006/25-0236
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
CGA9N3X7S2A106K230KB
TDK CGA9N3X7S2A106K230KB is a ceramic capacitor with 10uF capacitance, 100V rated DC voltage, and X7S temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and operating temperatures ranging from -55°C to 125°C.
EEEFPV101XAP
Panasonic EEEFPV101XAP is a 100uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.035mA, and ripple current of 390mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
0805B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
BFC237035223
Vishay Intertechnology
Vishay Intertechnology BFC237035223 is a 0.022 uF film capacitor with 160V AC and 250V DC ratings. It features polyester dielectric, radial package style, and tin terminal finish. Ideal for applications requiring reliable performance in temperatures ranging from -55 to 105 °C, such as automotive electronics meeting AEC-Q200 standards.
C0805C104K5RAC7215
KEMET C0805C104K5RAC7215 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size of 2x1.25x0.78mm and operating range from -55°C to 125°C.
C1608X5R0J106M080AB
C1608X5R0J106M080AB by TDK is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
EEEFT1H221AP
Panasonic EEEFT1H221AP is a 220uF aluminum electrolytic capacitor with 50V URdc. It features tan delta of 0.1, leakage current of 0.11mA, and ripple current of 435.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
GRT188R61H105KE13D
Murata Manufacturing
Murata Manufacturing's GRT188R61H105KE13D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 50V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
M39006/30-0040
Vishay Intertechnology's M39006/30-0040 is a TANTALUM CAPACITOR with 850uF capacitance, 8V URdc, and 0.3 Tan Delta. Ideal for MIL-PRF-39006/30 applications requiring polarized capacitors with -55 to 125 °C operating range and low ESR of 470mohm in tubular package.
VY2103M63Y5US63V7
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .01 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Terminal Finish: Matte Tin (Sn);
LMK325BJ107MM-T
Taiyo Yuden
Taiyo Yuden's LMK325BJ107MM-T is a ceramic capacitor with 100uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for surface mount applications in various electronic devices.
293D106X9010A2TE3
Vishay Intertechnology's 293D106X9010A2TE3 is a TANTALUM CAPACITOR with 10uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
EEEHD1V221AP
Panasonic EEEHD1V221AP is a 220uF aluminum electrolytic capacitor with 35V rated DC voltage. It has low tan delta of 0.14 and leakage current of 0.077mA, suitable for automotive applications meeting AEC-Q200 standard. With compact SMT package style and cylindrical shape, it is ideal for surface mounting in tight spaces.
08051C103KAT2A
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMK105BJ105KV-F
LMK105BJ105KV-F by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact, high-performance capacitors with a negative tolerance of 10%.
LMK107BJ475KA-T
Taiyo Yuden's LMK107BJ475KA-T is a ceramic capacitor with 4.7uF capacitance and 10V URdc. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LMK107BBJ106MALT
Taiyo Yuden's LMK107BBJ106MALT is a ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact 0.8x.8x1.6mm size and wraparound terminals for efficient surface mounting.
LMK107B7105KA-T
Taiyo Yuden's LMK107B7105KA-T is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and WRAPAROUND terminals.
LMK105BJ105MVHF
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107B7105KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
LMK107SD223KA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
LMK105BJ224KV-F
LMK105BJ224KV-F by Taiyo Yuden is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 10V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85 °C.
LMK107BJ475KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107BBJ226MA-T
Taiyo Yuden's LMK107BBJ226MA-T is a ceramic capacitor with 22uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance.
LMK107B7225KA-T
LMK107B7225KA-T by Taiyo Yuden is a 0603 SMT ceramic capacitor with 2.2uF capacitance and 10V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for high-value applications requiring compact surface-mount components with a negative tolerance of 10%.
LMK107B7225KA-TR
LMK107B7225KA-TR by Taiyo Yuden is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its compact rectangular package shape and wraparound terminals.
LMK105BJ104KV-F
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107BJ225KA-T
LMK107BJ225KA-T by Taiyo Yuden is a 0603 SMT ceramic capacitor with 2.2uF capacitance and 10V URdc. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for compact electronic devices requiring stable capacitance in varying temperatures. Its matte tin terminal finish and wraparound shape ensure secure surface mounting for reliable performance.
LMK107BJ225KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK105BBJ475MVLF
LMK105BBJ475MVLF by Taiyo Yuden is a 0402 SMT ceramic capacitor with 4.7uF capacitance and 10V URdc. It features X5R temperature characteristics, -55 to 85 °C operating range, and 0.1 Tan Delta. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
LMK105BJ225KV-F
LMK105BJ225MV-F
LMK105BJ225MV-F by Taiyo Yuden is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C, making it suitable for various electronic applications requiring stable performance in a compact SMT package.
LMK107B7224KA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
LMK107BJ106MA-TD
CERAMIC CAPACITOR; Capacitance: 10 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC; Packing Method: Tape, Paper;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved