Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMK107B7224KA-T by Taiyo Yuden is a ceramic capacitor with 0.22uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.027
1k+ parts
$0.017
10k+ parts
-
Mouser Electronics
$0.013
$0.012
$0.010
Verical
Nova Conductors
$0.014
Electro Sonic
$0.011
IBS Electronics
Vyrian
Sensible Micro Corp
Semicontronic
$0.006
Ampacity Inc.
Argo Parts USA
Netroflash
Continental Prestige Electronics
$0.018
$0.015
Corohmni
$0.242
Aztec Data Supply Inc.
$0.470
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
Ceramic capacitors are known for their stability and reliability in various electronic applications, making this product a durable choice.
Rectangular packaging allows for easy arrangement and installation of multiple capacitors on a circuit board, optimizing space efficiency.
Multi-layer design increases the capacitance density of the capacitor, allowing for higher capacitance values in a compact form.
Wraparound terminals provide strong mechanical support and secure solder connections, ensuring stability during operation.
X7R temperature characteristics indicate stable capacitance over a wide temperature range, making this capacitor suitable for diverse environments.
With a capacitance of 0.22 uF, this capacitor is suitable for filtering, coupling, and decoupling applications in electronic circuits.
Rated at 10 V, this capacitor can safely handle a maximum DC voltage, ensuring reliable performance in various electronic systems.
Fixed Capacitors LMK107B7224KA-T attributes and parameters. Explore more Fixed Capacitors devices from Taiyo Yuden
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
LMK107B7224KA-T Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Part Number - X5R, X7R Dielectrics 23/Jan/2008
PCN Part Status Change - Mult Devs NRND 01/Apr/2023 Mult Devs NRND 30/Jul/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Philips Components
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
R46KI310000M1K
KEMET Corporation
R46KI310000M1K by KEMET Corp is a film capacitor with 0.1uF capacitance, rated 560V URdc & 275V URac. It has POLYPROPYLENE dielectric material, -40 to 110 °C operating temp range & is used in applications requiring high voltage tolerance.
C0805C106K4PACTU
KEMET C0805C106K4PACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature coefficient. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 85°C makes it suitable for various electronic devices.
CGA3E2X7R1H103K080AA
TDK
TDK's CGA3E2X7R1H103K080AA is a 0603 SMT ceramic capacitor with capacitance of 0.01uF, rated at 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for automotive applications meeting AEC-Q200 standard.
C0805C104K5RAC7210
KEMET C0805C104K5RAC7210 is a ceramic capacitor with 10% tolerance, X7R temperature characteristics, and 0.1uF capacitance. Ideal for surface mount applications in electronics due to its compact size (2x1.25x.78mm) and 50V rated DC voltage.
EEEFTV151XAP
Panasonic
Panasonic EEEFTV151XAP is a 150uF aluminum electrolytic capacitor with 35V URdc. It has low Tan Delta of 0.12 and high Ripple Current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
GRM155R60J106ME15D
Murata Manufacturing's GRM155R60J106ME15D is a ceramic capacitor with 10uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1x0.5x0.5mm) and high reliability with a temperature coefficient of 15%.
BFC237035223
Vishay Intertechnology BFC237035223 is a 0.022 uF film capacitor with 160V AC and 250V DC ratings. It features polyester dielectric, radial package style, and tin terminal finish. Ideal for applications requiring reliable performance in temperatures ranging from -55 to 105 °C, such as automotive electronics meeting AEC-Q200 standards.
EEEHD1E4R7AR
Panasonic EEEHD1E4R7AR is a 4.7uF aluminum electrolytic capacitor with 25V URdc. It features tan delta of 0.16, leakage current of 0.003mA, and ripple current of 17mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
12063D106KAT2A
KYOCERA AVX
12063D106KAT2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 25V URdc, and X5R temp characteristics. Ideal for SMT applications due to its compact size and surface mounting feature. Suitable for use in electronic devices requiring stable performance in a wide temperature range.
GRM155R71A104KA01D
Murata Manufacturing's GRM155R71A104KA01D is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
CL10B104KO8NNNC
Samsung Electro-mechanics
CL10B104KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for SMT applications requiring compact size and high reliability.
C1812C681JFGACTU
C1812C681JFGACTU by KEMET Corp is a ceramic capacitor with 0.00068uF capacitance, 1500V URdc, C0G temp code. Ideal for SMT applications with 5% tolerance, -55 to 125 °C operating range. Rectangular package, multi-layer design suitable for various electronic circuits.
CC0805KKX7R7BB105
Yageo's CC0805KKX7R7BB105 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C0402C104K8PACTU
KEMET Corporation's C0402C104K8PACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
C1005X5R0J475K050BC
The TDK C1005X5R0J475K050BC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
0603YC104K4T2A
0603YC104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact size and surface mounting feature.
TAJD106K035RNJ
TAJD106K035RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and low ESR in a wide temperature range from -55 to 125 °C.
M39006/25-0248
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM155R60J475ME87D
Murata Manufacturing's GRM155R60J475ME87D is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and compact SMT package style. Ideal for applications requiring high reliability in a small form factor like consumer electronics and automotive systems.
EMVY101ARA101MKE0S
Nippon Chemi-con
EMVY101ARA101MKE0S by Nippon Chemi-con is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 100V. It features a tan delta of 0.1 and leakage current of 0.1mA, making it suitable for applications requiring high ripple current handling capabilities. With a cylindrical package shape and surface mounting feature, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMK105BJ105KV-F
Taiyo Yuden
LMK105BJ105KV-F by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact, high-performance capacitors with a negative tolerance of 10%.
LMK107BJ475KA-T
Taiyo Yuden's LMK107BJ475KA-T is a ceramic capacitor with 4.7uF capacitance and 10V URdc. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LMK107BBJ106MALT
Taiyo Yuden's LMK107BBJ106MALT is a ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact 0.8x.8x1.6mm size and wraparound terminals for efficient surface mounting.
LMK107BJ106MALTD
LMK107BJ106MALTD by Taiyo Yuden is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact rectangular package style with wraparound terminals.
LMK107B7105KA-T
Taiyo Yuden's LMK107B7105KA-T is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and WRAPAROUND terminals.
LMK105BJ105MVHF
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107B7105KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
LMK107SD223KA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
LMK105BJ224KV-F
LMK105BJ224KV-F by Taiyo Yuden is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 10V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85 °C.
LMK107BJ475KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107BBJ226MA-T
Taiyo Yuden's LMK107BBJ226MA-T is a ceramic capacitor with 22uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance.
LMK107B7225KA-T
LMK107B7225KA-T by Taiyo Yuden is a 0603 SMT ceramic capacitor with 2.2uF capacitance and 10V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for high-value applications requiring compact surface-mount components with a negative tolerance of 10%.
LMK107B7225KA-TR
LMK107B7225KA-TR by Taiyo Yuden is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its compact rectangular package shape and wraparound terminals.
LMK105BJ104KV-F
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK107BJ225KA-T
LMK107BJ225KA-T by Taiyo Yuden is a 0603 SMT ceramic capacitor with 2.2uF capacitance and 10V URdc. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for compact electronic devices requiring stable capacitance in varying temperatures. Its matte tin terminal finish and wraparound shape ensure secure surface mounting for reliable performance.
LMK107BJ225KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
LMK105BBJ475MVLF
LMK105BBJ475MVLF by Taiyo Yuden is a 0402 SMT ceramic capacitor with 4.7uF capacitance and 10V URdc. It features X5R temperature characteristics, -55 to 85 °C operating range, and 0.1 Tan Delta. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
LMK105BJ225KV-F
LMK105BJ225MV-F
LMK105BJ225MV-F by Taiyo Yuden is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C, making it suitable for various electronic applications requiring stable performance in a compact SMT package.
LMK107B7224MA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved