Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFBK1608HS220-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and offering an output impedance of 22Ω. With dimensions of 1.6x0.8x0.8mm, it's ideal for data line filtering applications requiring a max operating temperature of 125°C and min of -55°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Pegasus Components GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Rebound Electronics
Nova Conductors
Vyrian
Ampacity Inc.
$1.400
Aztec Data Supply Inc.
$1.940
Corohmni
$2.711
AZTECH Wire
$7.560
$7.260
$7.120
$6.970
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Having 2 terminals allows for easy connectivity in a circuit, providing a simple solution for installation.
Ferrite chip filters are known for their high efficiency in reducing electromagnetic interference, ensuring a clean and stable signal transmission.
With a high maximum operating temperature of 125°C, this product can withstand harsh environmental conditions without compromising performance.
The low minimum operating temperature of -55°C makes this product suitable for a wide range of applications, even in colder environments.
The Tin with Nickel finish on the terminals provides excellent conductivity and corrosion resistance, ensuring long-term reliability.
The slim width of 0.8mm allows for space-efficient mounting in tight spaces, making it ideal for compact electronic devices.
The low DC resistance of 0.05 ohm helps minimize power loss and ensures efficient performance of the filter.
The compact length of 1.6mm enables easy integration into circuit boards, contributing to a streamlined design.
The output impedance of 22 ohms helps in maintaining signal integrity by minimizing reflections and distortions in the transmission line.
The tape and reel packaging facilitates automated pick-and-place assembly processes, increasing efficiency in mass production.
The surface mount configuration simplifies installation on PCBs, saving space and allowing for higher component densities on the board.
The precise dimensions of 1.6x0.8x0.8mm (or 0.063x0.031x0.031 inch) ensure compatibility with standard mounting requirements, providing ease of use.
With a rated current of 1.5 A, this filter can handle moderate power levels, making it suitable for a variety of applications.
The low height profile of 0.8mm allows for a compact overall design, ideal for applications where space is limited.
Data Line Filters LFBK1608HS220-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
LFBK1608HS220-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1554216002
Molex
WIRE AND CABLE;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
BAV99
Infinex
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Onsemi
Taiwan Semiconductor
4300-009LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 5 A; Height: 2.79 mm; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; Maximum Insertion Loss: 25 dB;
DLW5AHN402SQ2L
Murata Manufacturing
Murata Manufacturing's DLW5AHN402SQ2L is a data line filter with 2 functions, rated at 50V and 0.2A. With dimensions of L5.0xB3.6xH4.3 (mm), it operates b/w -25°C to 85°C, offering max DC resistance of 3 ohm and output impedance of 4000 ohm. Ideal for surface mount applications requiring high insulation resistance up to 10 Mohm.
BLM18KG601BH1D
Murata Manufacturing's BLM18KG601BH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 600 OHM and operates b/w -55 to 150 °C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
74270057
Wuerth Elektronik & Kg
Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.
74279277
Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.
MPZ2012S601A
TDK
The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.
PA3747.306NL
Pulse Electronics
PA3747.306NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It has an inductance of 19500 uH, max operating temperature of 125°C, and rated current of 0.75 A. Ideal for applications requiring high output impedance and through hole mounting.
BK1608TS102-TV
Taiyo Yuden
BK1608TS102-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated at 0.3A current. With dimensions of L1.6xB0.8xH0.8 (mm), it has an output impedance of 1000Ω and max operating temp of 125°C. Ideal for data line filtering in surface mount applications.
MMZ2012R301ATD25
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
DLW21SN121SQ2L
Murata Manufacturing's DLW21SN121SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max operating temperature of 85°C and min insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines, it has dimensions of L2.0xB1.2xH1.2 (mm) and operates at a rated current of 0.37A.
AWCU00453228201XTE
Chilisin Electronics
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; No. of Functions: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10 Mohm; Length: 4.5 mm;
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
SRF0602-331Y
Bourns
Bourns SRF0602-331Y is a 2-function data line filter with inductance of 330uH and max DC resistance of 0.3 ohm. It operates b/w -40 to 105°C, rated at 50V, suitable for applications requiring output impedance of 900 ohm like data transmission systems.
B82790-S513-N201
TDK B82790-S513-N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Ideal for applications requiring a compact surface-mount solution, it offers low DC resistance of 0.14 ohm and output impedance of 50 ohm.
BLM18HG471SN1D
Murata Manufacturing's BLM18HG471SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 470Ω and max frequency of 1000MHz. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.
MI0603J680R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
ACF451832-153-TD01
ACF451832-153-TD01 by TDK is a data line filter with 1000 Mohm insulation resistance, 25 dB attenuation at 70 MHz, and rated voltage of 50 V. It is ideal for applications requiring surface mount filters with dimensions L4.5XB1.8XH3.2 (mm) in tape and reel packaging.
74279215
Wurth Elektronik 74279215 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for data line filtering applications due to its 80 OHM output impedance and surface mounting type.
742792012
Wurth Elektronik 742792012 is a Ferrite Chip Data Line Filter with 2 terminals, operating b/w -55 to 125 °C. It has an output impedance of 33 OHM, DC resistance of 0.008 ohm, and rated current of 4 A. Ideal for surface mount applications in electronics for filtering frequencies from 100 MHz to 800 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFBKP2125HS600-T
LFBKP2125HS600-T by Taiyo Yuden is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This filter is suitable for surface mount applications and has dimensions of L2.0XB1.25XH0.85 (mm).
LFBK1608HS601-T
LFBK1608HS601-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.35A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications.
LFBK1608TS102-T
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .3 A; No. of Terminals: 2; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel;
LFBK2125HS470-T
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 1 A; No. of Functions: 1; Length: 2 mm; No. of Terminals: 2;
LFBKP2125HS221-T
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 220 OHM;
LFBK1005HW601-T
LFBK1005HW601-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for noise suppression in electronic devices.
LFBK2125HS102-T
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .3 A; No. of Terminals: 2; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch); Width (mm): 1.25;
LFBK1608LM252-T
FERRITE CHIP; Maximum DC Resistance: 1.1 ohm; Rated Current: .2 A; Output Impedance (ohm): 2500 OHM; Height: .8 mm; Packing Method: TAPE AND REEL;
LFBK1005HM121-T
FERRITE CHIP; Maximum DC Resistance: .18 ohm; Rated Current: .3 A; No. of Functions: 1; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT;
LFBK2125LM182-T
FERRITE CHIP; Maximum DC Resistance: .45 ohm; Rated Current: .3 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 1800 OHM; Dimensions: L2.0XB1.25XH1.25 (mm)/L0.079XB0.049XH0.049 (inch);
LFBK1005HS601-T
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .3 A; Minimum Operating Temperature: -55 Cel; Width (mm): 0.5; Packing Method: TAPE AND REEL;
LFBKP1608HS391-T
LFBKP1608HS391-T by Taiyo Yuden is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is commonly used for noise suppression in electronic devices.
LFBK1005LL470-T
LFBK1005LL470-T by Taiyo Yuden is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for noise suppression in electronic devices.
LFBK2125HM102-T
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 1000 OHM;
LFBK2125HS101-T
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .9 A; No. of Terminals: 2; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch); Width (mm): 1.25;
LFBK1005HS241-T
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .4 A; No. of Functions: 1; Height: .5 mm; No. of Terminals: 2;
LFBK2125HS601-T
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Width (mm): 1.25; Mounting Type: SURFACE MOUNT; Packing Method: TAPE AND REEL;
LFBK1005HW680-T
FERRITE CHIP; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Minimum Operating Temperature: -55 Cel; Width (mm): 0.5; Maximum Operating Temperature: 125 Cel;
LFBK1005LL181-T
LFBK1005LL181-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1x0.5x0.5mm, it offers an output impedance of 180 ohm and rated current of 0.3A, suitable for surface mount applications in various electronic devices.
LFBK1608HS330-T
FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 1.2 A; Height: .8 mm; Output Impedance (ohm): 33 OHM; Width (mm): 0.8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved